| Sign In | Join Free | My burrillandco.com |
|
...Flow Meter Digital Mass Air Flow Meter Digital Flow Meters Gas Description Air Flow Meter Digital Mass Air Flow Meter Digital Flow Meters Gas MF4600 series mass flow meters are made with proprietary MEMS sen...
... (Coriolis Force). The accuracy would not be affected by any factors like the temperature, pressure, density, viscosity,etc. And the compensation calculation is not required. The Coriolis Mass Flow Meter con...
...pdf TF1100-EC High Accuracy Ultrasonic Water Oil Milk Diesel Fuel Flow Meter works on the transit-time method. The clamp-on ultrasonic sensors are mounted on the external surface of the pipe for non-invasive...
Stainless Steel Industrial Flow Meter / Turbine Water Meter IP65 1. Introduction LWGYML series intelligent liquid turbine Flowmeter is a new intelligent instrument which integrates turbine flow sensor and displ...
... Flow Meter with High Performance 1. Introduction MLF electromagnetic flow meter, composed of sensor and converter, works based on Faraday’s law of electromagnetic induction law. It is used to measure electr...
... Flow Meter Waste Water Flow Meter 1. Introduction MLF electromagnetic flow meter, composed of sensor and converter, works based on Faraday’s law of electromagnetic induction law. It is used to measure elect...
... of sensors and converters. Used to measure the conductivity of liquid or solid. In general, its conductivity should be greater than 5μs/cm (tap water and raw water conductivity is about 100 ~ 500μs/cm), and...
.... Used to measure the conductivity of a liquid or solid. Generally, its conductivity should be greater than 5μS/cm (the conductivity of tap water, raw water is about 100~500μS/cm). it can also be used to mea...
...Mag Flow Meter Electromagnetic Water Flow Meter 1. Introduction The MLF electromagnetic flowmeter works according to Faraday's law of electromagnetic induction and consists of a sensor and a transducer. Use...
... or B transducers). Digital Non Invasive Flow Meter Ultrasonic TF1100-DC clamp on water flow meter works on the transit-time method.The clamp-on ultrasonic transducers (sensors) are mounted on the external s...
...Flow Meter Flowmeter Description GXEFM2000 electromagnetic liquid nitrogen flow meter are intended for fluid measurement in most industries including water, wastewater, food and beverage, pharmaceutical and ...
... available including CR, PU, PTFE, PO, and PPS, this flow meter is suitable for handling corrosive liquids commonly found in the chemical industry. One of the key features of this Flow Meter is its exception...
...Flow Meter is a versatile and reliable instrument designed for a wide range of applications, including municipal water supply. With its various output signals and robust housing protection, this flow meter o...
...liquids that allow ultrasonic waves to pass, such as water, molten sulfur, cryogenic liquids, and chemicals. Transit time designs are also available to measure gas and vapor flow. Be careful because fluids t...
.... The sensors are generally inserted in line into the pipes' diameter, and are therefore designed such that they do not disturb or restrict the flow of the medium under measurement. As the sensors are not di...
...clean, sanitary, dirty, corrosive and abrasive liquids. Magnetic flowmeters can be applied to the flow of liquids that are conductive, so hydrocarbons and gases cannot be measured with this technology due to...
... sides. By using differential pressure transmitter or gauge, the differential pressure value is converted into standard current signal or aero-pneumatic signal to show the flow or volume of the...
... sides. By using differential pressure transmitter or gauge, the differential pressure value is converted into standard current signal or aero-pneumatic signal to show the flow or volume of the fluid on the...
...flow meter that measures flow by a V-shaped throttling element. Its rounded top angle is downward, which is conducive to the smooth passage of liquids containing suspended particles or viscous liquids, and w...
... sides. By using differential pressure transmitter or gauge, the differential pressure value is converted into standard current signal or aero-pneumatic signal to show the flow or volume of the fluid on the...