| Sign In | Join Free | My burrillandco.com | 
 | 
 
                    110mm Strong power injection Plastic Hook And Loop Description Injection hook,a common connection accessories,which is a high-end special , it is only the hook side, and the loop side can choose with separately...
 
                    ... enough, compared to the normal welded fence panel. The wire diameters are available, such as 6mm×2+5mm×1, 8mm×2+6mm×1. It obtains high strong powers to resist the construction....
 
                    ... power distribution overhead line, can monitor line’s running signal like load current, phase electrical field strength,fault current etc. & monitor status signal like main power supply and standby power sup...
 
                    ... centralized monitoring the current, temperature and fault condition on the power distribution circuit.The fault indicator is used for indicating of phase-to-phase and phase-to-earth faults by determining sh...
 
                    ...,then send the signal to central station by GSM or GPRS. Main characteristics: 1) Wireless receive: receive fault point information from panel indicator through wireless 2) GSM OR GPRS send: send status and ...
 
                    ...Introduction TYHD-AI 110 is applied to 3-110kv Overhead power Line, it is a kind of Communicable smart power line Fault Indicator, is applied to 110kV overhead line ,is a device to indicate line fault curren...
 
                    ... indicators and Data transmission unit. one DTU can connect 12 indicators. 1 set indicators is composed of 3 pcs. DTU Description 1. description Remote terminal uint is the data acquisition and communication...
 
                    ... indicator displays and remotely transmitted the detected fault signal from earthed fault indicator transmitted by optical fiber,when earth fault happened in cable. It can help line finder find the fault loc...
 
                    ...power indicator is made according to IEC60335 for standard electric shock prevention test. It provides a 40-45V power supply in the IP test for metal wire. 1. The electric contact power indicator use digital...
 
                    ...Power Controller Adjusting Function MAX VR max output adjusting MIN V output adjusting Input Signal Adjustment 4-20mA 1-5VDC 2-10VDC choice one of these type Indicator Function OUT SCR Output indication (wit...
 
                    ...Loop Tape This product features a reversible hook-and-loop design that works equally well on both the hook and loop sides, allowing them to interlock seamlessly without distinction between the surfaces. The ...
 
                    ...Indicator This Weighing Scale Indicator is a reliable and precise weighing control solution designed for various industrial applications. It is designed to offer superior protection against dust, water and o...
 
                    ...high, and can display weight units in Kg or Lb. The indicator is equipped with a high resolution display that provides clear readings even in difficult-to-read environments. The power supply can be AC or DC,...
 
                    ...Peak hold and average function 3. Automatic/manual accumulation 4. Four-level battery indication, low power alarm and automatic power off 5. High and low limit alarm function, with high and low indication 6....
 
                    ... hydroelectric power plant (station) Spare Parts professional enterprise. I supply the following products: servo valve J761-003 power station Servo valve SV4-20 (15) 57-80/40-10-S451 Solenoid valve DG4V-3-2A...
 
                    ... to the ceramic transducer and the welding head(horn),the vibration will up to 35000 times per second, then this power will go throw the booster and welding horn to the thermal non-woven laminates to gain en...
 
                    ... to the ceramic transducer and the welding head(horn),the vibration will up to 35000 times per second, then this power will go throw the booster and welding horn to the thermal non-woven laminates to gain en...
 
                    ...Indicator for short-circuit and earth fault indicator for underground cable is a set of accessory device installed in RMU, Cable Branch box and Transformer Substation of Power Distribution System, is used fo...
 
                    ...detect faults and provide a local light indication. In addition, the indicator also has current measurement and wireless data communication capabilities, by sending the fault signal to FTU,in order to comply...