| Sign In | Join Free | My burrillandco.com |
|
.../200A/400A/600A DC current to the loop of breaker, it is used to test the contact resistance of circuit breaker or high current cable contacts according to IEC62271. The loop resistance tester adopts 4-termi...
...Loop Resistance Tester Introduction: CRT Switchgear Loop Resistance Tester is designed according to IEC62271 to test the contact resistance of circuit breaker or high current cable contacts. There are 100A, ...
...resistance tester XHHL3200SC The loop resistance tester, also known as the micro-ohmmeter and contact resistance tester, is an instrument developed by our company for measuring various high-voltage switches,...
... for testing the contact resistance of the high and low voltage switch, the DC resistance of the high and low voltage cable line and other micro ohm resistance measurement, the test speed is fast and the acc...
...Loop Resistance Tester is used to test the contact resistance of circuit breaker or high current cable contacts. It is designed according to IEC62271. The main application of it is measurement of circuit bre...
Product Introduction 1, the test current, contact resistance is in full compliance with the relevant national standards testing requirements. 2, the output voltage is high, wide measurement range up to 100m. 3...
HT5910 Digital Resistance Meter RCD Loop Tester Multimeter for GFCI Loop Resistance Testing 1. Comply with IEC/EN 61010-1 1000V CAT II,600V CAT III Safety standards 2. Maximum common ......
...-ation of large-scale integrated analog & digital circuits and micro-processor chip. It mai-nly measures RCD, line/loop impedance, continuity, insulation resistance, DC and AC voltage, phase sequence, featur...
...light display and microprocessor technology to measure the grounding resistance through inductive method. When measuring a grounded system with a loop, it is not necessary to disconnect the ground lead wire,...
...Resistance Tester 30A 1300Ω 32mm VICTOR 6412 Clamp Ground Resistance Tester 30A 1300Ω Clamp Open Size 32mm Clamp-on ground resistance tester is a major breakthrough in traditional grounding resistance measur...
.... This is an important measurement to ensure the proper functioning and safety of an electrical system. Range Resolution Basic accuracy Grounding resistance 20Ω 0.01Ω ±(2%+0.1Ω) 200Ω 0.1Ω ±(2%+3d) 2000Ω 1Ω ±...
... Photovoltaic System Solution:Peakmeter Photovoltaic System Solution.pdf Features of Earth Ground Resistance Tester Store measured data (up to 100 groups) Ground voltage (up to 600V) Ground resistance of dif...
... earth voltage:200/600V ±(2%+5) DCV:2/20/200V ±(0.5%+5), 600V±(0.8%+5) Battery of the earth resistance measurement circuit : 3.7Vx3 Lithium battery Battery of displayer:AA1.5Vx2 dimension:150x100x70mm FAQ 1....
IEC 60331 Cable Fire Resistance Tester Fire Equipment For Product Testing Introduction of IEC 60331 Cable Fire Resistance Tester Fire Equipment For Product Testing The cable fire resistance tester is applicable...
...resistance tester HYHL-III 100A 2. Equipment Description: 100A and 200A are same panel design. Contact resistance tester output DC 100A current to test the contact resistance of circuit breaker or high curre...
...Loop Tack Tester / Tape Adhesion Tester / Initial Adhesion / PSTC - 16 Standard FINAT(FINAT test method No. 9: loop tack measurement), PSTC-16(Loop tack), ASTM D6195-03(Standard test methods for loop tack), ...
...Loop Tack Tester Less Than 1% Error Introduction: It is used to do the loop tack test of kinds of adhesive,tape,can meet FINAT (FINAT Test Method No. 9:measurement), ASTM D6195, PSTC 16 test standards. Work ...