| Sign In | Join Free | My burrillandco.com |
|
...LPG CNG Injector Rail For 4 Cylinder Automotive Injectors The 2 ohm 4 cylinder LN-LIG1 injector rail is grey, it injects gas fuel into the engine in computed quantity. It is required for cars running on alte...
... engine structure, so as to ensure the stable combustion of gas and improve the power of the engine when using gas fuel. It can be installed on 3,4,5,6 and 8 cylinder cars fitted with an injection-ignition s...
...LPG CNG Conversion Kits The 511N timing advance processor (TAP) adjusts the spark advance angle without changing the original engine structure, so as to ensure the stable combustion of gas and improve the po...
...LPG Conversion Kits are designed for cars looking to switch to a more cost-effective and eco-friendly fuel option. This particular kit features a Single Point Injection cylinder type, making it suitable for ...
... tank and transfers it through the fuel lines. The pressure regulator reduces the pressure, which is compatible with the engine fuel injection system. Then, CNG transfers to the combustion or manifold chambe...
... to your requirements, such as red, blue, black, etc. LPG CNG injector rail is used for CNG/LPG gaseous injection system. It has a function that measures gaseous fuel and injects it into the intake-manifold....
Products Description LLANO LPG1000 LPG Level Sensor LPG Pressure Gauge for Autogas Conversion Kit This is a resistive 0~90 ohm LPG level sensor for left multivalves. Its gauge displays the readings of LPG level...
Products Description LLANO 48-pin CNG LPG ECU with OBD II for Gasoline Direct Injection Engine LN-GDI ECU is a product designed for Gasoline Direct Injection (GDI) engine cars and fit for GDI TSI TFSI SIDI D4T ...
...calculated amount of gas fuel in to the engine. Gas fuel type LPG or CNG Cylinder number 2 cylinder Inlet gas fitting φ10 mm,φ12 mm Working Voltage 7-11V Work Pressure 0.5~2.5 bar Maximum pressure 4.5 bar Th...
...Gas Temperature Sensor for LPG CNG Car Injection System The gas temperature sensor converts the CNG LPG gas temperature to an analog signal and send it to the ECU. It works with 4 pin MAP sensor and water te...
...Fuel Type LPG CNG Filter Cartridge For Autogas Multipoint Injection System The cartridge is the main element to enable the LPG CNG filter to filter out impurities in the gas fuel. It is a consumable material...
...can be assembled to suit the number of cylinders in your vehicle. In addition to its high-precision gas injection capabilities, the LPG CNG Injector also comes with a 1-year warranty, giving you peace of min...
...Injection Autogas System LN-EMU-4C injector emulator is designed for 3 and 4 cylinder cars and is capable of emulating the normal operation of the petrol injectors while the vehicles runs on CNG or LPG autog...
...seamless transition from traditional fuel sources to a more environmentally friendly alternative. With its advanced technology and high-quality components, the CNG LPG Conversion Kits are ideal for individua...
... Regulator for Autogas Conversion Kit The LN-AT04 pressure regulator is a pressure reducer for traditional CNG sequential injection systems. AT04 CNG pressure regulator is a 3-stage pressure reducer for trad...
... engine structure, so as to ensure the stable combustion of gas and improve the power of the engine when using gas fuel. It can be installed on 3,4,5,6 and 8 cylinder cars fitted with an injection-ignition s...
Products Description LLANO Gasoline Direct Injection Engine CNG LPG ECU for Autogas Conversion Kit LN-GDIB ECU is a one of our solution to increasing cars with Gasoline Direct Injection (GDI) engine in the mark...
Products Description LLANO LN-TAE Rectangular Gas Petrol Changeover Switch for Fuel Injection Systems LN-TAE gas petrol changeover switch is the device for the driver to switch the fuel mode between petrol mode...
...LPG CNG Electronic Control Units LN-24C ECU is designed for multi-point port 3,4- cylinder fuel Injection engines. LN-24C ECU is designed with a minimum size and weight and has all the basic functions for an...
... signal and send it to the ECU, so as to control the fuel injection amount. It is comopatible with AEB type ECUs such as MP48. Application CNG or LPG Dimension 8cm*9cm*3.5cm Weight 0.05kg Working voltage DC ...