| Sign In | Join Free | My burrillandco.com |
|
... 1) The bench accords with the standard of “ IEC 60736:1982 testing equipment for electrical energy meters”, “IEC 62053” 2) The bench can be used to test single phase energy meter (up to 0.5 class), include ...
...Meter Single Phase Two Wire Watt Hour Meter LCD Display PRODUCT INFORMATION DDS-6L Series single phase electronic energy meter is a high technology product adople avanced IC technology as well as SMT technol...
... Energy Meter presell of electricity, run out of automatic power off, power threshold can be set. 1. In accordance with the International standard IEC61036 2. Rated voltage: 220V; 3. Calibrated current: 5(20...
0.2 Class Singel And Three-phase Multi-function Energy Meter Inspection Bench With DDS Technology Product introduction ZXDN-306 Three-phase Multi-function Meter Inspection Device is our company's requirements a...
ZX3030C Portable Three Phase Testing Device Product introduction ZX3030C Portable Three Phase Testing Device adopts luxurious aluminum alloy case and detachable aluminum alloy hanging table frame. It is suitabl...
SF6 density relay calibrator fully automatic, Density meter, Density meter check KS2001 SF6 switch is a high-voltage appliance widely used in power system, and the reliable operation of SF6 switch has become on...
...Meter Module High Efficiency And Small Size The application of light source optical power meter should choose different types of optical power meter according to different use conditions: 1, with direct meas...
... bag, urine meter and bottom outlet with T-tap valve or the outlet tubing with clamp. The inlet connector is used to connect with an indwelling catheter, the urine meter is for accurate monitoring of urine o...
... Meter Probe 850/980/1310/1510 ~1640nm Continuous Calibration The sampling period of the U8721 high-speed optical power meter module of Guangzhou Youxi can reach the uS level, and the data can be acquired an...
...Calibration ATC PH Meter : What Is ATC PH Meter ? PH meter is an electronic device used for measuring the PH value (acidity or alkalinity) of a liquid. A typical PH meter consists of a special measuring prob...
... instruments. Standard sine signals at frequency 10, 20, 40, 80, 160, 320, 640 and 1280 Hz 2.Can be generated from the calibrator the amplitude of the acceleration,...
...Meter for Open channel Partially filled pipe with conductivity Area Velocity Flow Meter for Open channel Partially filled pipe with conductivity is robust, reliable and easy to use. It is completely sealed a...
Double channels Ultrasonic Water Meter for high accuracy and reliable operation This ultrasonic water meter adopts dynamic zero point and time calibration before each measurement, which makes flow measurement ...
Ultrasonic Flow Meter DF6100-EP For Cast Iron Ultrasonic Flow Meter DF6100-EP For Cast Iron use Doppler principle to measure sewage with particles and bubbles. The external clamp sensor is tightly attached to t...
... from 40 to 4000mm 3.4-20mA, OCT outputs 4.Accuracy: 2.0% Calibrated span 5.Rechargeable battery can work up to 50 hours 6.Excellent low flow rate measurement ability, low to 0.05m/s 4-20mA OCT output Rech...
...Meter Features: (1) 14 hours battery (rechargeable), back-lit 4 lines display. (2) Data logger function. (3) Wide bi-directional flow range of 0.01 m/s to 12 m/s. Wide liquid temperature range: -35℃~200℃. (...
...Meter Features: Non-invasive transducers. 14 hours battery (rechargeable), back-lit 4 lines display. Works reliably in both clean and somewhat dirty liquids with turbidity<10000ppm. Non-invasive transducers. Can be used for mobile measurement, flow rate calibration, data comparing, meters......
... outside surface of the pipe. It has advantage that measurement is not influenced by pipe scale or blockage. It’s simple to install and calibrate due to unnecessary pipe cutting or flow stop. Specifications:...