Total 106 products for mandrel test Manufacture & Suppliers

• IEC60065 Mandrel Test Equipment For Insulation Film Abrasion Test

  

  ...Mandrel Test Equipment for Insulation Film Mandrel / Mechanical Strength and Abrasion Test 1. Introduction of Mandrel Test Equipment Mandrel Test Equipment is designed according to IEC61588 figure 6, IEC6095...

  Pego Electronics (Yi Chun) Company Limited

  Jiangxi,China

  Verified Supplier

  Add to cart

  Contact Supplier

• IEC61588 / 60065 Mandrel Test Equipment For Insulation Material Layer Abrasion Test

  

  ... clause design manufacture dedicated instrument. The test shall be performed by fixing the specimens of thin sheets on a mandrel made of nickel plated steel or brass with smooth surface finish. A metal foil ...

  KingPo Technology Development Limited

  Hong Kong,China

  Verified Supplier

  Add to cart

  Contact Supplier

• IEC60065 Clause 8.21 Mandrel Test Device 10° And 230° Rotate Angle

  

  ...following: Three test samples, each individual sample consisting of three or more layers of non-separable thin sheet material forming REINFORCED INSULATION , are used. One sample at a time is fixed to the ma...

  Guangzhou HongCe Equipment Co., Ltd.

  Guangdong,China

  Verified Supplier

  Add to cart

  Contact Supplier

• IEC 61558 1 IEC 60950 Mandrel Test Equipment For Insulation Material

  

  ...Mandrel Test Equipment For Insulation Material IEC 61558-1 Mandrel Test Equipment For Insulation Material Mandrel Test Device Description: This device is used to test the Insulation anti damage strength veri...

  Dongguan Kingpo Technology Limited

  China

  Verified Supplier

  Add to cart

  Contact Supplier

• IEC 60950-1 Metal Mandrel Test Apparatus For Tensile Strength Verification

  

  ...Mandrel Test Apparatus For Tensile Strength Verification Product Information For Metal Mandrel Test Apparatus: This test apparatus conforms to IEC 62368-1:2018 clause 5.4.4, IEC60950-1:2013 clause 2.10.5.8, ...

  Sinuo Testing Equipment Co. , Limited

  Guangdong,China

  Verified Supplier

  Add to cart

  Contact Supplier

• IEC 60811-504 2012 Mandrel Test Apparatus & Impact Test Apparatus

  

  ... or round insulated cores at low temperature. The manual low-temperature impact test device is used to measure the samples of wire and cable insulation and jacket, plugs and sockets, insulating electrical sl...

  DONGGUAN DAXIAN INSTRUMENT EQUIPMENT CO.,LTD

  Guangdong,China

  Verified Supplier

  Add to cart

  Contact Supplier

• IEC 60950 Communication Test Equipment , Mandrel Test Equipment HX9804

  

  ...n layer material. Feature:The position of 10°and 230°are set with mechanical limit,not only to ensure the accuracy of the test angle, but also to achieve a simple operation method; weight with a hanging ring...

  shanghai kerang technology co ltd

  Shanghai,China

  Active Member

  Add to cart

  Contact Supplier

• Slim Hole Drill Stem Test ToolsRound Mandrel Slip Joint DST Tool 3 7/8" Size

  

  ...Test ToolsRound Mandrel Slip Joint DST Tool 3 7/8" Size Introduction of Round Mandrel Slip Joint 3 7/8" round mandrel slip joints are available for the slim hole well testing service, fracturing operation. R...

  Techcore Oil Tools Co.,Ltd,

  China

  Verified Supplier

  Add to cart

  Contact Supplier

• 4 3/4 In Round Mandrel Slip Joint For Drill Stem Testing Tools Fracturing Service

  

  ...Mandrel Slip Joint For DST service Fracturing Service The Round Mandrel Slip Joint is the part of drill stem testing tool string, the slip joint accepts the movement associated with ocean heave or temperatur...

  XI 'AN ZZ TOP OIL TOOLS CO.,LTD

  China

  Verified Supplier

  Add to cart

  Contact Supplier

• Mandrel IEC Test Equipment 150N Force Manual Control

  

  Mandrel Test Device IEC Test Equipment 150N Test Force Manual Control Standard: IEC 61558-1 ‘Safety of transformers, reactors, power supply units and combinations thereof – Part 1: General requirements and test...

  HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD

  Guangdong,China

  Verified Supplier

  Add to cart

  Contact Supplier

• 2.25 inch N-Test Tool Running Tools Wireline Tools Lock Mandrel

  

  ...Test Tool Running Tools Wireline Tools Lock Mandrel I.Overview The N-Test Tool is used to pressure test the line above the threaded joint mounted in it. The tool is designed to maintain only the pressure fro...

  Ruixin Energy Equipment

  Shaanxi,China

  Verified Supplier

  Add to cart

  Contact Supplier

• 8500 Psi Surface Testing Pressure Gas Lift Mandrel CM Series Conventional Type

  

  ...Mandrels(CM-5---CM-7, CM Series), Surface Testing Pressure 8500psi The CM series conventional gas lift mandrels are used with the 1" OD or 1.5" OD conventional injection-pressure-operated gas lift valves. Th...

  Hunan Victor Petrotech Service Co.,Ltd

  Hunan,China

  Active Member

  Add to cart

  Contact Supplier

• GB/T 11185 Paint Testing Equipment Conical Mandrel Tester With Stainless Steel Shaft

  

  ... rod, and clamp the fixing plate. → bend the test plate along the conical axis with the manual operating lever → bend the sample 180 degrees with uniform force within 15 seconds → remove the ......

  Hebei Better United Import And Export Co., Ltd.

  Hebei,China

  Site Member

  Add to cart

  Contact Supplier

• Rubber Hose Hydrostatic Test Pump Hose Mandrel Depoling Machine 1000bar 100MPa

  

  Rubber Hose Hydro Pressure Test Pump And Hose Mandrel Depoling Machine 1000bar Details: 1.Power end crankshaft housing is made by the cast iron.it is stronger than the aluminium alloy. 2.Cross head is made by t...

  Chengdu Sincere Da Machinery Co.Ltd

  Sichuan,China

  Verified Supplier

  Add to cart

  Contact Supplier

• DST Rupture Disc Circulating Valve 5" X For Drill Stem Testing

  

  ...Testing The Rupture Disc Circulating valve is the same as RD Safety circulating valve except short of ball valve section, the annulus pressure made RD burst and the pressure goes into RD hole and push circul...

  XI‘AN ZZTOP OIL TOOLS CO.，LTD

  China

  Verified Supplier

  Add to cart

  Contact Supplier

• Compact and sturdy structure Cylindrical Mandrel Bending Tester EVS-1603

  

  Compact and sturdy structure Cylindrical Mandrel Bending Tester EVS-1603 Brief Introduction: A very robust mechanical unit for determining the elasticity, adhesion and elongation of dry paint on metal sheet. Pe...

  DongGuan Q1-Test Equipment Co., Ltd.

  Guangdong,China

  Site Member

  Add to cart

  Contact Supplier

• BGD 566 ISO 6860 Conical Mandrel Tester Coating Shaft Bending Machine

  

  BGD 566 ISO 6860 Conical Mandrel Tester Coating Shaft Bending Machine 1. Description: The Conical Mandrel Tester is designed in accordance with the standards of GB/T 11185 and ISO6860-84, and is used to evaluat...

  DONGGUAN LONROY EQUIPMENT CO LTD

  Guangdong,China

  Verified Supplier

  Add to cart

  Contact Supplier

• Conical Mandrel Bending Non Destructive Testing Equipment ASTM D522

  

  Conical Mandrel Bending Tester Product Introduction: A very robust mechanical unit for determining the elasticity, adhesion and elongation of dried paint on sheet metal. It can be used in accordance with ASTM D...

  HUATEC GROUP CORPORATION

  Beijing,China

  Verified Supplier

  Add to cart

  Contact Supplier

• 33kVAC-50pF High Voltage Ceramic Mandrel High Withstand Voltage Ceramic Capacitor

  

  ...mandrel capacitor CT811-33kVAC-50pF 6-36KV ceramic mandrel N4700/Y5T Features Small size High withstand voltage Low loss, good stability Dimension Applications High voltage supply circuit in duplicatior Volt...

  XIAN XIWUER ELECTRONIC AND INFO. CO., LTD

  Shaanxi,China

  Verified Supplier

  Add to cart

  Contact Supplier

• Stainless Steel Mandrel Bend Elbow 90 Degree Thickness Smooth Mandrel Bent Tube

  

  ...Mandrel Bend Elbow 90 Degree Thickness Smooth Mandrel Bent Tube Competitive Advantage 1.ISO9001:2008 2.Timely delivery rate is 99.8%,sometimes in advance. 3.Excellent after-sales service. 4.Rapid enquiry rep...

  TOBO STEEL GROUP CHINA

  Shanghai,China

  Verified Supplier

  Add to cart

  Contact Supplier