| Sign In | Join Free | My burrillandco.com |
|
...COM1~COM8) : relay common pin 3. Normally opened pin (NO1~NO8) : relay normally opened pin specifications 1. Maximum load on normally open pin: AC 250V/10A, DC 30V/10A. 2. Trigger current 5mA; 3. Power indic...
... Indication Audio/LED Light Maximum Explore Depth 1.5m(1*1m Aluminium board) Detectable Mode Ground Balance/Discrimination Explore Frequency 455khz Ferrous& Non-ferrous Metal Distinguish √ Continous Operatin...
...-16.000 Rz: 0.02-160.00 Sample length (mm) 0.25, 0.80, 2.50 Evaluation length(mm) (1-5)L Maximum drive stroke 17.5mm/0.7inch Indication accuracy 0.001 Indication error ±(7-10)% Variability <6% Data Storage 100 groups Power Rechargeable li-battery Working...
...maximum flexibility As for 2.5 inch LCD monitor, 640*480 resolution is the most rational and actual data. Remaining Charge indicator eliminates guessing Portable: The compact, cable-free device is ready when...
... (voltage) 24 to 240V AC/DC 50/60Hz, 380VAC can be ordered Maximum current consumption 4mA Ambient temperature -40°C to +60°C Protection class IP65 Shell material flame retardent ABS plastic Electrical conne...
... are corrosion resistant and leads are readily solderable • ROHS Compliant • Solder hot dip Tin(Sn) lead finish • Cathode indicated by polarity band • Band Indicates Cathode Maximum Ratings and Thermal Chara...
... N-PE System OBV-I30 data: Uc(maximum continuous operating voltage) 320V Up(voltage protection level) ≤1.9kv suitable power system 1-N/E, single phase Response time ≤100ns Indication LED indication Housing M...
... core Permalloy 1J85 soft magnetic material, with higher initial permeability and higher maximum permeability, higher saturation magnetic induction. Application: overhead transient recording fault indicator,...
... Type Designation: Inverter Feature: 1. The applicable motor capacity indicated is the maximum capacity applicable for use of the Mitsubishi 4-pole standard motor. 2. The rated output capacity indicated assu...
... N-PE System OBV-I30 data: Uc(maximum continuous operating voltage) 320V Up(voltage protection level) ≤1.9kv suitable power system 1-N/E, single phase Response time ≤100ns Indication LED indication Housing M...
...2000m (the altiplano area should be indicated when order) 3. Earthquake intensity: not higher than 7 degrees; 4. Maximum wind velocity :less than 35m/s. 5. The filthy area should be given clear indication. F...
... 1000-2000m (the altiplano area should be indicated when order) 3. Earthquake intensity: not higher than 7 degrees; 4. Maximum wind velocity :less than 35m/s. 5. The filthy area should be given clear indicat...
... the location of the metal articles Alarm area indication: There are 6 zones on LED display that will indicate the position where the metal article locates Adjustable area sensitive: The maximum sensitivity ...
... core Permalloy 1J85 soft magnetic material, with higher initial permeability and higher maximum permeability, higher saturation magnetic induction. Application: overhead transient recording fault indicator,...
...2000m (the altiplano area should be indicated when order) 3. Earthquake intensity: not higher than 7 degrees; 4. Maximum wind velocity :less than 35m/s. 5. The filthy area should be given clear indication. F...
... 1000-2000m (the altiplano area should be indicated when order) 3. Earthquake intensity: not higher than 7 degrees; 4. Maximum wind velocity :less than 35m/s. 5. The filthy area should be given clear indicat...
... N-PE System OBV-I30 data: Uc(maximum continuous operating voltage) 320V Up(voltage protection level) ≤1.9kv suitable power system 1-N/E, single phase Response time ≤100ns Indication LED indication Housing M...
... N-PE System OBV-I30 data: Uc(maximum continuous operating voltage) 320V Up(voltage protection level) ≤1.9kv suitable power system 1-N/E, single phase Response time ≤100ns Indication LED indication Housing M...