| Sign In | Join Free | My burrillandco.com |
|
... Temperature: 5℃~35℃ 2. Relative humidity: ≤85% 3. Air pressure: 86kPa~106kPa Limitation of specimen: This test equipment prohibits: 1. Testing or storing samples of flammable, explosive, and volatile substa...
...Testing Equipment Complied Standards & Clauses IEC/CDV 61851-1 "Electric vehicle conductive charging system - Part 1: General requirements" clause 12.3 IEC 60664-1 "Insulation coordination for equipment with...
...-1, IEC60598-1. Equipment Overview The IPX7 Immersion Test Chamber SN4410 is a precision-engineered waterproof testing solution designed for evaluating the ingress protection of products under temporary wate...
...Test Equipment IPX1/IPX2 Water Vertical Drop Test Solution This testing equipment evaluates protection against vertically falling water droplets. Designed and built in compliance with IEC60529 standards for ...
... and coatings firmness. This equipment complies with JIS-K6745, A5430 test standards. The machine to a certain weight of steel ball adjusted at a certain height, the ball free fall hit the test sample, depen...
.... At the same time, it can also be tested to find out which parts of the sample are more likely to be damaged and whether the electric vehicle supply equipment is safety. It is a necessary durability test eq...
...Testing Equipment IEC60320-1 Pull Test Equipment for Connectors and Plug Connectors 1. Introduction The pull test apparatus designs to meet the test requirements of IEC60320-1 clause 22.2.3 and figure 6, for...
Vibration Shaker Table Systems for Shock and Vibration Battery Testing Solutions Shock and Vibration testing standards : MIL-STD, DIN, ISO, ASTM, IEC, ISTA, GB, GJB, JIS, BS etc. Shock and Vibration Testing Mac...
...; Insulating performance evaluation-Tracking resistance and Erosion resistance test; Polymer materials used under severe outdoor conditions; Insulating materials; Combustion, environment, mechanics and other...
... technology and mechanical transmission. It has a wide and accurate loading speed and force measuring range, and has a high accuracy and sensitivity for the measurement and control of load, deformation and ....
...Test Machine Small Shaker for University Introduction: ET series standard vibration table with light weight, small volume, convenient to move, is widely used in the acceleration sensor calibration, the tiny ...
...Test Machine Small Shaker for University Introduction: ET series standard vibration table with light weight, small volume, convenient to move, is widely used in the acceleration sensor calibration, the tiny ...
...Testing Equipment For Cord Winding Crack Test In Low Temperature Quick Details Alternative name Cord winding crack tester Function Cable flexibility and rolling durability in low temperature Feature Electric...
...Testing Equipment Horizontal-Vertical Flame Chamber Tester Brief Introduction Horizontal Burning Test:UL HB,IEC 60695-11-10,IEC 60707,ISO 1210,GB/T 2408 50W Vertical Burning Test :UL94 V0,V1,V2,IEC 60695-11-...
...Testing per IEC Standard 60529,IP Testing equipment per IEC Standard 60529 The second digit indicates the level or protection that the enclosure provides against access to hazardous parts and the ingress of ...
Spring Impact Hammer For IEC60068-2-75 IEC Test Equipment Standard: IEC 60068-2-75 Environmental testing –Part 2-75: Tests – Test Eh: Hammer tests. IEC 60065, IEC60335-1, IEC60598-1 and etc. Feature: The constr...
0.5 J Spring Impact Hammer For IEC60068-2-75 IEC Test Equipment Standard: IEC 60068-2-75 Environmental testing Part 2-75: Tests Test Eh: Hammer tests. IEC 60065, IEC60335-1, IEC60598-1 and etc. Feature: The ...
...Testing Equipment 1.50 /500 W flames tester Brief Introduction Horizontal Burning Test:UL HB,IEC 60695-11-10,IEC 60707,ISO 1210 50W Vertical Burning Test :UL94 V0,V1,V2,IEC 60695-11-10,ISO 1210,IEC 60695-11-...
...Test Equipment Label Marking Abrasion Test Machine Sliding Weight 500g Production introduction: This testing apparatus is design and manufactured according to IEC60730-1 standard figure 8 and annex A require...
...Testing Equipment For Low Temperature Bending Test Standard:IEC60811-1-4 clause 8.1 and 8.2, common test methods for insulating and sheathing materials of electric and optical cables-part 1-4:Methods for gen...