| Sign In | Join Free | My burrillandco.com |
|
...test AS/NZS3112-Figure 2.1 (in part) dimensions of plugs AS/NZS3112-Figure 2.2 Apparatus for flexing test AS/NZS3112-Figure 2.3 Form of pin AS/NZS3112-Figure 2.4 Dimensions of insulaton on insulated live pin...
...Test Set Insulating Gloves Boots Withstanding Tester Introduction HYDZ insulating gloves and boots tester is application to test leakage current, insulation aging, power frequency of insulating gloves and bo...
...-500kV insulator. Insulator distribution voltage test meter also can do all kinds of 35kV and AC voltage measurement in laboratory. It is an ideal testing meter for the safety of line operation and the auxil...
...test AS/NZS3112-Figure 2.1 (in part) dimensions of plugs AS/NZS3112-Figure 2.2 Apparatus for flexing test AS/NZS3112-Figure 2.3 Form of pin AS/NZS3112-Figure 2.4 Dimensions of insulaton on insulated live pin...
...Test Insulation Oil Withstand Voltage Tester Introduction: BDV-A 100kV With Oil Temperature Test Insulation Oil Withstand Voltage Tester is developed according to the national standard IEC156 Insulating Oil ...
...Testing Cable Insulation Sheaths 1. Introduction The indentation device is designed according to IEC60811-508:2012 figure 1, the device is consisted by blade, supporting mandrel and loads.It is applied to te...
...Test Apparatus Test Non-metallic Materials Product details: The HT Ball Pressure Tester conforms to many standard requirements like IEC60884-1, IEC60950 and so on. It is used for testing the heat resistance ...
... equipment, IEC60065-1 Audio, video and similar electronic apparatus-Safety requirements, UL1310 Class 2 Power Units clause 40.2. Test sample Insulating materials of audio video apparatus. Feature equipped w...
... common test methods for insulating and sheathing materials of electric and optical cables-part 1-4:Methods for general application-Test at low temperature. It is applicable for the insulating sheath of the ...
... including the performance of breakover, polarity, insulation resistance, withstand voltage, copper exposed or electric leakage of the wire, cable and so on. The operation is easy and the testing speed is fa...
... technology equipment, IEC60065-1 Audio, video and similar electronic apparatus-Safety requirements, IEC 61558-1. Test sample: non-separable thin sheets of audio video apparatus. Feature: The position of 10°...
... to testing the damage degree of flexible cord when applying a certain gravity pull. Test object of rated voltages up to and including 450/750V polyvinyl chloride insulated cables. The test device is easy to...
... thin layer materials. Test sample: Non separable thin layer material. Feature: The position of 10°and 230°are set with mechanical limit, not only to ensure the accuracy of the test angle, but also to achiev...
...insulated cables-Rated voltages up to and including 450/750 V-Part 1:General requirements,IEC60245-2 clause 3.3 and Figure 3 Rubber insulated cables-Rated voltages up to and including 450/750 V-Part 2: Test ...
...Testing Equipment Static Flexibility Tester Clamp Height 1.5m At Least Standard:IEC60245-1 Rubber insulated cables-Rated voltages up to and including 450/750 V-Part 1:General requirements,IEC60245-2 clause 3...
... Pin Electric Safety Testing Probes Product information: The test pin is used to do the scratch resistant test of the electrical solid insulation surface. It conforms to the standard requirement of IEC60335-...
... equipment, made by HongCe, is a top-notch testing solution built to meet International Electrotechnical Commission standards. It gives you accurate performance tests on electrical equipment. Because it’s ac...