| Sign In | Join Free | My burrillandco.com |
|
...cable, used to connect optical device to another for signal routing. Each end of the cable is attached to a connector, so the cord may be plugged in. The MMF is a cost effecitive and relatively low connectio...
... OFNR Cable construction Round single jacket cable Outer diameter 1.8mm Fiber type SMF OS1; MMF OM3/OM4/OM5 optional Patchcord Connector parameters SN SM/MM Compliance Telcordia GR-326 Color of ......
... OFNR Cable construction Round single jacket cable Outer diameter 1.8mm Fiber type SMF OS1; MMF OM3/OM4/OM5 optional Patchcord Connector parameters SN SM/MM Compliance Telcordia GR-326 Color of ......
Every cable is individually tested on full range of Cisco equipments, walks through the testing challenges and 100% compatibility Complies with all multi-source agreement (MSA) standards to ensure seamless netw...
T-FX4FNS-N00 Overview T-FX4FNS-N00 SFP, compatible with the IEEE 802.3z 1000BASE-SX standard, operates on legacy 50 m multimode fiber links up to 550 m and on 62.5 m Fiber Distributed Data Interface (FDDI)-gr...
200G QSFP56 SR4 AOC 3m Deliver high-speed, reliable connectivity for data centers and high-performance computing (HPC) with our 200G QSFP56 SR4 AOC 3m Active Optical Cable (AOC). This Optical Transceiver Module...
COP-AOC800G-xxC OSFP 800G to 800G AOC Cable 50m MMF OM3/OM4 Introduction The 800G and 400G optical transceivers are high-speed fiber-optic modules used to transmit large ......
...Cable Cisco Compatible Products Description Electrical interface compliant to SFF-8431 Hot Pluggable 850nm VCSEL transmitter, PIN photo-detector receiver Up to 300m on OM3 MMF Operating case temperature: 0 t...
Product Features: High Performance in IL & RL 4,8,12 and 24 fiber connector terminations and assemblies Designed for low loss and standard loss SM and MM applications Economical solution for mass-termination of...
The Realsea QSFP-A100G Active Optical Cables (AOCs) are a high performance, low power consumption, long reachinterconnect solution supporting InfiniBand QDR/DDR/SDR, It is compliant with the QSFP28 MSA and IEEE...
...Cable for Data Center Direct Connection for 40GbE QSFP+ to 4x SFP+ AOC. Product Features Hot pluggable Electrical interface compliant to QSFP+ (SFF-8436) 850nm VCSEL transmitter, PIN photo-detector receiver ...
...Cable (AOC) TF-FCxxx-N00 Fiber Type Single mode Connector LC Single power supply +3.3v Extinction Ratio 3.5 dB Power Consumption 2.5W Applications 100G Ethernet links QSFP28 100Gb/s TF-FCxxx-N00 Features 4 i...
Cisco GLC-LH-SM, 1000Base SFP Optical Transceiver SFP,1.25Gb/s,GE,1000Base-LX,SMF,1310nm,10KM Form Factor: SFP Reach: 10km Cable Type: singlemode fiber Rate Category: 1000Base Interface Type: LX Con...
10GB Ethernet Optical Transceiver Module DS-SFP-FC4G-SW For Switches Router Cisco DS-SFP-FC4G-SW Cisco DS-SFP-FC4G-SW Features: FP Wavelength (nanometers) Fiber Type Core Size (microns) Baud Rate (GBd) Cable Di...
GLC-LH-SMD Overview Cisco GLC-LH-SMD 1000BASE-LX/LH SFP is made for Both Multimode and Single-Mode Fibers. The 1000BASE-LX/LH SFP, compatible with the IEEE 802.3z 1000BASE-LX standard, operates on standard sing...
GLC-SX-M M D Overview The GLC-SX-M M D 1000BASE-SX SFP is made for Multimode Fiber only. The 1000BASE-SX SFP, compatible with the IEEE 802.3z 1000BASE-SX standard, operates on legacy 50 m multimode fiber links...
GLC-LH-SMD Overview Cisco GLC-LH-SMD 1000BASE-LX/LH SFP is made for Both Multimode and Single-Mode Fibers. The 1000BASE-LX/LH SFP, compatible with the IEEE 802.3z 1000BASE-LX standard, operates on standard sing...
GLC-SX-MM D Overview The GLC-SX-MM D 1000BASE-SX SFP is made for Multimode Fiber only. The 1000BASE-SX SFP, compatible with the IEEE 802.3z 1000BASE-SX standard, operates on legacy 50 m multimode fiber links u...
GLC-SX-MM-RGD Overview The GLCSXMMRGDST is a Cisco GLC-SX-MM-RGD compatible fiber transceiver module that has been designed, programmed and tested to work with Cisco brand switches and routers. It delivers dep...
T-DP4CNT-N00Overview TheT-DP4CNT-N00 SFP is made for Multimode Fiber only. The 1000BASE-SX SFP, compatible with the IEEE 802.3z 1000BASE-SX standard, operates on legacy 50 m multimode fiber links up to 550 m a...