| Sign In | Join Free | My burrillandco.com |
|
... of course, radiator also can be supplied. Alloy State: 3003 Chemical Composition: Element Si Fe Cu Mn Mg Cr Zn Bi Zr Ti Al Max 1.0 0.7 0.1 1.8 0.05 - 1.8 - 0.20 - Rem Min 0.5 - - 1.4 - - 1.2 - 0.05 - - Mech...
... energy automobile/vehicles 2.Alloy State: 3003 or according to customers' requests. 3.Chemical Composition(%) Core Alloy:3003 Element Si Fe Cu Mn Mg Cr Zn Bi Zr Ti Al Max 0.6 0.7 0.20 1.5 - 0.05 0.10 0....
...(%) Clad 1 ratio(%) Clad 2 ratio(%) Max - 185 - 12 - Min 125 145 3.0 8 - 4.Chemical Composition(%) Core Alloy : 3003 Element Si Fe Cu Mn Mg Cr Zn Bi Zr Ti Al Max 0.6 0.7 0...
..., 3003, etc 2)Cladding alloy:4343,4045,7072,5052 etc 3)Cladding rate:4%-18% 7.Chemical Composition(%) Core Alloy:3003 Element Si Fe Cu Mn...
... customers, welcome for inquiry. 1.Specification: As customers' requests. 2.Chemical Composition: Remark:some composition can adjust as customers' requests. Element Si Fe Cu Mn Mg Cr Zn Ni Be Ti Al M...
...' heat. Alloy State: 3003 or according to customers' requests. Core Alloy:3003 Element Si Fe Cu Mn Mg Cr Zn Bi Zr Ti Al Max 0.6 0.7 0.20 1.5 - 0.05 0.10 0.05 - - Rem Min - - 0.05 1.0 - - - -...
.... It is the preferred choice for aircraft due to its lightweight and formability. 2024 T351 Aluminum Plate has a thickness ranging from 10mm to 150mm and consists of the alloy elements Cu 3.8-4.9%, Fe 0.50%,...
... standard EN 17152:1997. Material Composition Note: When mechanical and electrical functions are qualified, chemical composition may not be fully verified. Element Si Fe Cu V+Ti+Mn+Cr Other Al Percentage % ≤...
... alloy structural steels C ≤0.20 (ASTM A572/A572M-15 ,EN10025 S355N) Mn ≤1.70 Si ≤0.50 Accessories Q235 235 GB/T 700-2006 Carbon structural steels (ASTM A283 Gr.B ,......
... Standard ASTM A790 Process Method Cold Drawn or Cold Rolled 316L Stainless Steel Pipe Chemical Composition Elements TP316L (wt%) (C) Carbon, max 0.035 (Mn) Manganese, max 2 (P) Phosphorus, max 0.045 (S) Sul...
316L Seamless Pipe Chemical Composition : Elements TP304L(wt%) TP316L (wt%) (C) Carbon, max 0.035 0.035 (Mn) Manganese, max 2 2 (P) Phosphorus, max 0.045 0.045 (S) Sulfur, max 0.03 0.03 (Si) Silicon, max 1 1 (N...
... is 18% chromium (Cr) and 8% nickel (Ni), and also contains a small amount of carbon (C), manganese (Mn) and other elements. Features: Good corrosion resistance, high temperature resistance and oxidation res...
... and General Engineering Purposes Size range: O.D.:6-350mm W.T.:1-50mm L:max12000mm Steel Grade and Chemical Compositions: chemical element Mn P S Cr Mo steel grade max max max HFW2 0.7 0.05 0.05 HFW...
... Compostion Composition, % Element Nicel (UNS N02200) Low-Carbon Nickel (UNS N02201) Ni,A min 99.00 99.00 Cu 0.25 0.25 Fe 0.40 0.40 Mn, max 0.35 0.35 C,max 0.15 0.02 Si,max 0.35 0.35 S...
...) Ni,A min 99.00 99.00 Cu 0.25 0.25 Fe 0.40 0.40 Mn, max 0.35 0.35 C,max 0.15 -- C,max -- 0.02 Si,max 0.35 0.35 S,max 0.01 0.01 Applications: ......
... expansion alloy; Long-term use by the aviation factory, stable performance. Mainly for the manufacture in the temperature range approximately constant element sizes Chemical composition(%) Grade C Si Mn P S...
... 2.0-4.0 Mn 0.5-1.30 0.15-0.70 0.15-0.07 0.15-0.70 Si (max) 0.05 0.10 0.30 0.30 Cu (max) 0.......
.... Application: Aluminium primary alloy ingot is a kind of traditional products , which is used for adjusting compositions of aluminum smeltings. With assistance from several metallic elements with...
Magnesium anodes for cathodic protection system tear drop anode condenser anode Standard : ASTM G-97 Chemical compositions of cast magnesium anode (%) Element High potential AZ63B AZ63C AZ63D Al <0.01 5.30-6.70 5.30-6.70 5.0-7.0 Zn --- 2.50-3.50 2.50-3.50......
... requirements Copper or copper alloy UNS No. Copper Tin Al Ni incl Co Pb max Fe max Zn max Mn max As Sb P max Cr Other named elements C44300 70.0-73.0 0.9-1.2 0.07 0.06 remainder 0.02-0.06 ...