Total 882 products for mn element Manufacture & Suppliers

• Round 2 Inch Polished Stainless Steel Pipe For Heat Exchangers / Condensers

  

  ... requirement TABLE 2 Chemical Requirements Chemical Compostion Composition, % Element Nicel (UNS N02200) Low-Carbon Nickel (UNS N02201) Ni,A min 99.00 99.00 Cu 0.25 0.25 Fe 0.40 0.40 Mn, max 0.35 0.35 C,max ...

  NEW-ERA STEEL TUBE TECHNOLOGY CO.,LTD

  China

  Verified Supplier

  Add to cart

  Contact Supplier

• 1060 Five Bars Pattern Aluminium Checker Plate , Aluminium Chequered Sheet Baseboard

  

  ..., elevators, etc. Also can be used in your garage or workshop for a variety of purposes. Function:Anti-skidding 1060/H18 Chemical composition and Mechanical properties: Element Si Fe Cu Mn Mg...

  Trumony Technology Co., Ltd

  Zhejiang,China

  Active Member

  Add to cart

  Contact Supplier

• 316LVM Stainless Steel Cold Drawn Bar for Surgical Implants ASTM F138 S31673

  

  ... shown that an acceptable levet of bialogical response can be expected, when the material is used in appropniate applications. Chemical composition(%) Elements ASTM F 138 ISO 5832-1 C 0.030 0.030 Mn 2.00 2.0...

  Suzhou Xunshi New Material Co., Ltd

  Jiangsu,China

  Verified Supplier

  Add to cart

  Contact Supplier

• Magnesium Extruding Welding Wire Az31 Az61 Az91 1.2mm Bright Anealled Wire

  

  ..., the reels are packed in wooden case extruded pure magnesium wire Diametre: 1.2mm to 4.0mm or bigger AZ31 GB/T 5153 Elements Al Zn Mn Si Fe Cu Ni Others,total Min% 2.40 0.50 0.15 Max% 3.60 1.50 0.4 0.10 0...

  Shanghai Tankii Alloy Material Co.,Ltd

  Shanghai,China

  Verified Supplier

  Add to cart

  Contact Supplier

• 1.2/1.6/2.0/3.0/4.0/6.0mm Az91 Magnesium And Aluminum Alloy MIG Welding Wire

  

  ..., the reels are packed in wooden case extruded pure magnesium wire Diametre: 1.2mm to 4.0mm or bigger AZ31 GB/T 5153 Elements Al Zn Mn Si Fe Cu Ni Others,total Min% 2.40 0.50 0.15 Max% 3.60 1.50 0.4 0.10...

  Shanghai Tankii Alloy Material Co.,Ltd

  Shanghai,China

  Verified Supplier

  Add to cart

  Contact Supplier

• JIS C7701 / C7521 Electrum Copper Nickel Zinc Alloy German Silver Pipe / Tube For Pressing Parts

  

  ...albata, or electrum, is a copper alloy with nickel and often zinc. Nickel silver is named for its silvery appearance, but it contains no elemental silver unless plated. Chemical Content(%) Cu Fe Mn Ni Pb Zn ...

  Shanghai Tankii Alloy Material Co.,Ltd

  Shanghai,China

  Verified Supplier

  Add to cart

  Contact Supplier

• Heat Exchangers OD 420mm ASTM A178 ERW Welded Steel Tube

  

  ... Welding Size range: O.D.:6-127mm W.T.:0.9-9.1mm L: according to customer requirement STEEL GRADE AND CHEMICAL COMPOSITIONS Element Grade A Grade C Grade D C 0.06 - 0.18 ≤ 0.35 ≤ 0.27 Mn 0.27 - 0.63 ≤0.80 1....

  TORICH INTERNATIONAL LIMITED

  Zhejiang,China

  Verified Supplier

  Add to cart

  Contact Supplier

• 3LPE External Coating 2200mm SSAW Steel Pipe For Water System

  

  ... to 2235 mm, for water system, pollution issue. Equipped with elbow, reducer, tee, flanges and etc. Chemical Composition Of SSAW steel pipe Elements Material Chemical Composition% Mechanical Property C% Mn% ...

  Hebei Shengtian Pipe Fittings Group Co., Ltd.

  Hebei,China

  Verified Supplier

  Add to cart

  Contact Supplier

• ASTM B111 C68700 Heat Exchanger Tubes

  

  ...: OD 5-420mm WT 1-50mm LENGTH Max12000mm Chemical Composition: Chemical Composition Elements Composition, % Cu, incl. Ag 76.0-79.0 Sn – Al 1.8-2.5 Ni, incl. Co – Pb 0.07 max Fe 0.06 max Zn Balance Mn 0.02-0....

  TORICH INTERNATIONAL LIMITED

  Zhejiang,China

  Verified Supplier

  Add to cart

  Contact Supplier

• Anodized +/-0.001mm 718H Electronic Injection Molding

  

  ...needs stamping die. The material of vehicle mould is usually HT200,HT300(GG20,GG30)(FC200-300). other elements such as Mn,Cr can be added if needed. Our company has one full chain system and technical staff ...

  TAKDA PRECISE MOULD FACTORY

  Guangdong,China

  Verified Supplier

  Add to cart

  Contact Supplier

• Hot Rolled 42CrMo4 Die Alloy Steel Round Bar Length 1m-6m

  

  ...elements.After quenched and tempered, It obtains high strength, good low-temperature impact toughness with a typical tensile strength of 900 -1200 N/mm2.42CrMo4 steel has better performance than 34CrMo4 stee...

  Gnee Steel (tianjin) Co., Ltd.

  Henan,China

  Verified Supplier

  Add to cart

  Contact Supplier

• A387 Gr.21L Cl.1 Steel Plate A387 Pressure Vessel Plates A387 Hot Rolled Steel Sheet High Pressure Vessel

  

  ... for welded boiler and pressure vessels designed of elevated temperature service. A387 Gr.21L CL.1Chemical Composition Grade The Element Max (%) C Si Mn P S Cr Mo A387 Gr.21L Cl.1 0.12 0.50 0.25-0.66 0.035 0...

  Gnee Steel (tianjin) Co., Ltd.

  Henan,China

  Verified Supplier

  Add to cart

  Contact Supplier

• Bright Fecral Cral214 Electrical Heating Wire 0.03mm

  

  Fecral Heating Element Sheet 0cr21al4 GNormal composition% C P S Mn Si Cr Ni Al Fe Other Max 0.12 0.025 0.025 0.70 Max 1.0 18.0~21.0 Max 0.60 3.0~4.2 ......

  Shanghai Tankii Alloy Material Co.,Ltd

  Shanghai,China

  Verified Supplier

  Add to cart

  Contact Supplier

• Hot Rolled Powder Coated 3003 Weldable Aluminum Sheet In Coil

  

  ... Aluminum Sheet Product characteristics: 3003 series aluminum foil is a common product of Al Mn series alloy. Due to the manganese alloy element, this product has excellent antirust properties, also known as...

  FOSHAN SUNHOPE CO.,LTD.

  China

  Verified Supplier

  Add to cart

  Contact Supplier

• Polished Blower Main Shaft Forged Alloy Steel CNAS Certificate Finish Maching

  

  ... after the manufacture of special functional requirements of important parts, such as shaft, gear, fasteners, etc. Chemical elements 4340 C Si Mn S P Cr Mo Ni Analysis Identification 0.39 0.2 0.71 0.002 0.00...

  JIANGSU HUI XUAN NEW ENERGY EQUIPMENT CO.,LTD

  Jiangsu,China

  Verified Supplier

  Add to cart

  Contact Supplier

• Driving Shaft With Drilled Flange Forged Alloy Steel 8000T Open Die Hydropress

  

  Driving shaft with drilled flange Forged alloy steel 4340 Q+T Third party full inspection Chemical elements analysis identification: C:0.39 Si:0.20 Mn:0.71 S:0.002 P:0.002 Cr:0.78 Mo:0.22 Ni:1.70 Mechanical pro...

  JIANGSU HUI XUAN NEW ENERGY EQUIPMENT CO.,LTD

  Jiangsu,China

  Verified Supplier

  Add to cart

  Contact Supplier

• H13 1.2344 Skd61 8407 1.2343 Alloy Steel Round Bar For Die Steel

  

  ... composition: C Si Mn P S Cr Mo V 0.35-0.40 1.00-1.20 0.40-0.60 ≤0.015 ≤0.003 4.80-5.20 1.20-1.40 0.80-1.......

  Gnee Steel (tianjin) Co., Ltd.

  Henan,China

  Verified Supplier

  Add to cart

  Contact Supplier

• High Magnetic Saturation 1J27 Soft Magnetic Alloy Cold Rolled Strip Wire Rod

  

  ...alloy is 27% cobalt, the rest being other elements such as Fe and Ni, Cr, 1J27 alloy is one of XUNSHI's featured products. Chemical compostions(Weight Percent) C ≤0.030 Mn ≤0.40 Si ≤0.35 P ≤0.015 S ≤0.015 Cr...

  Suzhou Xunshi New Material Co., Ltd

  Jiangsu,China

  Verified Supplier

  Add to cart

  Contact Supplier

• Forging C71500 C10920 Copper Alloy Sheet Decorative Brass Sheet 0.5 Mm 0.5 Mm 200mm

  

  ... brass alloy.Different from normal brass alloy, special brass alloy is a multi-component copper alloy composed with Sn,Mn,Ni, Fe, Si and other elements.Special brass alloys have better brazing properties tha...

  Jiangsu Xinyuanxing Metal Products Co.,Ltd

  Jiangsu,China

  Verified Supplier

  Add to cart

  Contact Supplier

• 1.0mm Forging Mg Alloy Welding Wire AZ91 ZK60 For Aerospace

  

  ... spare parts, magnesium products for civil use, and handiwork welding. Chemical compositions of cast magnesium anode (%) Element High potential AZ63B AZ63C AZ63D Al <0.01 5.30-6.70 5.30-6.70 5.0-7.0 Zn --- 2.50-3.50 2.50-3.50 2.0-4.0 Mn 0.5-1.30 0...

  Dome Metals Co., Ltd.

  Henan,China

  Active Member

  Add to cart

  Contact Supplier