| Sign In | Join Free | My burrillandco.com |
|
... is higher. 2. Normally La2O3 content is 0.3-0.7%. 3. Molybdenum alloy rod possesses features with high hot hardness, high thermal conductivity, and low thermal expansion to hot work steels 4. It is a silver...
Molybdenum Rod Molybdenum Stirring Rod Is Used In Rare Earth Smelting Industry 1. Introduction Of Molybdenum Rod Mo Stirring Rod: The molybdenum stirring rod used in the rare earth industry is usually made of h...
...rod bar MoLa rod for high temperature furnace Molybdenum rod bar from Sifon:· Molybdenum rods are widely applied for heating elements in high temperature furnaces, electrodes, screws, rabbles in rare earth s...
...molybdenum rod heating element. There are two types of molybdenum wire heating elements: one-section and two-section. They are constructed from many strands of molybdenum alloy wire. The molybdenum rod heati...
...good mechanical properties and corrosion resistance, so it has a wide range of uses in the industrial field. The following are some of the main uses of molybdenum copper alloy: 1. Electronic devices: Molybde...
...Molybdenum Threaded Rod Machined Molybdenum Parts Molybdenum Threaded Rod Brand: mo1 Purity: above 99.95% Density: ≥ 10.2g/cm ^ 3 Melting point: 2610 ℃. Molybdenum thread rod is made by processing molybdenum...
...Molybdenum Threaded Rod Machined Molybdenum Parts Molybdenum Threaded Rod Brand: mo1 Purity: above 99.95% Density: ≥ 10.2g/cm ^ 3 Melting point: 2610 ℃. Molybdenum thread rod is made by processing molybdenum...
Molybdenum/Moly/Mo rod Description Sintering molybdenum rod, also known as sintering molybdenum bar, as the raw material, is mainly used in pulling molybdenum wire and forging molybdenum rod. Molybdenum rod for...
Molybdenum Lanthanum Rod Ground Bright Surface Lanthanum oxide 0.4%-0.7% Molybdenum Lanthanum Rod, Lanthanum Doped Molybdenum Rod for High Temp Vacuum Furnace . molybdenum and lanthanum. La2O3 is contained in m...
... rhenium. The alloy exhibits a rhenium effect that improves plasticity, and the rhenium content in the alloy is generally 11% to 50% (mass fraction). Both molybdenum and rhenium are refractory metals. Combin...
...Rod Molybdenum Bar Tzm Moly Rod Molybdenum Bar Description Titanium-zirconium-molybdenum rods (TZM rods) are prepared by powder metallurgy. TZM rod is a high-temperature alloy prepared by adding trace elemen...
Molybdenum/Moly/Mo rod Description Sintering molybdenum rod, also known as sintering molybdenum bar, as the raw material, is mainly used in pulling molybdenum wire and forging molybdenum rod. Molybdenum rod for...
...molybdenum rods and silicon-carbon rods are both resistive heating elements, and are high temperature, corrosion-resistant and oxidation-resistant, and are often used in the preparation of ceramics, magnetic...
Molybdenum Copper Composite Material Dia15mm Rod Sheet Plate For Instrumentation Component Material 1. Description Of Molybdenum Copper Composite Material: The molybdenum-copper composite material (alloy) has h...
...electrodes), wires, crucibles, boats, funnels, and other special shape molybdenum products. 2) Molybdenum alloy products: MLR plates, MLR rods, TZM plates, wires, and other molybdenum alloy products. Charact...
...cm3) Pure molybdenum rod Mo1 ≥9.8 TZM rod TZM ≥9.6 High temperature molybdenum rod GMo1 ≥9.6 Size of molybdenum bar/rod φ(20-100) ×(250-800) Tolerances(mm) diameter: ± 3 length: ± 10 Application of molybdenu...
Molybdenum Rod With Thread Molybdenum Screw With Diameter 0.8mm~200mm Introduction of Molybdenum Threaded Rod Material:Mo1, MoLa, TZM Chemical:Mo1:≥99.95% MoLa:Mo+La2O3(0.5%~1%) TZM:Mo+0.40~0.55%Ti+0.06~0.12%Zr...
Molybdenum Rod With Thread Molybdenum Screw With Diameter 0.8mm~200mm Introduction of Molybdenum Threaded Rod Material:Mo1, MoLa, TZM Chemical:Mo1:≥99.95% MoLa:Mo+La2O3(0.5%~1%) TZM:Mo+0.40~0.55%Ti+0.06~0.12%Zr...