| Sign In | Join Free | My burrillandco.com |
|
... N / 100mm Bending Radius Static/Dynamic: 10D / 20D Comply with Standard YD/T 1155-2001 as well as IEC 60794-1. Description: The fibers, 250μm, are...
FTTH Fiber Optic 12 core multimode aqua OM3 Indoor Distribution Cable Features: 1.900μm tight buffer fiber,aramid yarn,flame-retardant jacket; 2.Excellent stripping performance of tight buffer fiber; 3.Suited t...
... angle polishing the end of the fiber, one ensures that the reflection at the fiber —air interface is not captured by the fiber core. This reduces the reflection level in the fiber optic system and reduces f...
... steel Center Strength member Mode: Single mode, Multimode Bare fiber inside Gel Filled Description: GYTA Aluminum Polyethylene Laminate (APL) is applied around the cable core, which isfilled with the fillin...
...Fiber Optic Cable GYXTW53 Description: In the GYXTW53 cable, single-mode/multimode fibers are positioned in the loose tubes, the tubes are filled with water blocking filling compound.Tubes and fillers are st...
...Fiber Optic Cable GYXTW53 Description: In the GYXTW53 cable, single-mode/multimode fibers are positioned in the loose tubes, the tubes are filled with water blocking filling compound.Tubes and fillers are st...
...Fiber Optic Cable GYXTW53 Description: In the GYXTW53 cable, single-mode/multimode fibers are positioned in the loose tubes, the tubes are filled with water blocking filling compound.Tubes and fillers are st...
... tubes, the tubes are filled with water blocking filling compound.Tubes and fillers are stranded around the strength member into a circular cable core. Then the cable is completed with a PE sheath. Which is ...
..., while the loose tubes strand together around metallic central strength member into a compact and circular cable core, and the water-blocking materials are distributed into interstices of it. After a PSP/AP...
...Fiber Optic Cable Description: GJFJV indoor fiber optic cable is made by evenly applying strands of Aramid yarns as the strength member over 900μm or 600μm tight buffer fibers and then is completed with PVC(...
...Fiber Optic Cable Description: GJFJV indoor fiber optic cable is made by evenly applying strands of Aramid yarns as the strength member over 900μm or 600μm tight buffer fibers and then is completed with PVC(...
...Fiber Optic Cable Self-Supporting Tight Buffer Drop Cable GJYFBTCH Outdoor/Indoor Cable Self-Supporting Tight-Buffer Drop Cable Description Fiber Type: G.652, G.655 or G.657 single-mode fiber, A1a or A1b, OM...
...cable (figure 8 fiber cable) is a typical self supporting outdoor fiber optic cable with features of moisture resistance and crush resistance suitable for aerial application. Both single mode type and multim...
...Fiber Optic Cable Self-Supporting Tight Buffer Drop Cable GJYFBTCH Outdoor/Indoor Cable Self-Supporting Tight-Buffer Drop Cable Description Fiber Type: G.652, G.655 or G.657 single-mode fiber, A1a or A1b, OM...
..., and high-performance outer sheath material. Application: Connection for Passive and Active Optical Component Fiber Optical Patch cord and connectors Transmission equipment,Voice data Flat Ribbon Fiber Opti...
...Fiber Optic Cable GYTS53 Direct Buried Stranded Loose Tube Armored Cable Description The GYTS53 cable contains single-mode/multimode fibers that are placed in loose tubes. These tubes are filled with a water...
... Resistance Long/Short Term: 600/1500 N/100m Bending Radius Static/Dynamic: 10D/20D GYTC8S-07 Cable complies with Standard YD/T 1155-2001as well as IEC 60794-1 Description: The fibers,...
... Crush Resistance Long/Short Term: 600/1500 N/100m Bending Radius Static/Dynamic: 10D/20D GYTC8A Cable complies with Standard YD/T 1155-2001as well as IEC 60794-1 Description: The fibers, 250μm...
...fiber optic cable Description In the mini/small figure 8 cable, this cable consist of the loose tube with single mode or multimode fibers and steel wire as the messenger wire, which are formed like “Figure 8...