| Sign In | Join Free | My burrillandco.com |
|
Bunched Cable Vertical Flame Spread Tester Introduction EN 50399 specifies the tester and methods of test for the assessment of vertical flame spread, heat release and smoke production of vertically-mounted bun...
...17492 Clothing For Protection Against Heat And Flame- Heat Transmission On Exposure NFPA 1971 Application: TPP thermal protection performance meter is mainly used to test the thermal insulation performance o...
... and helmet with flame retardant requirements. It can be used in rubber industry, plastic industry, inspection department and scientific research institute. Test method: The safety helmet shall be placed cor...
..., pillow, duvet, and similar products that used to cover on the bed of the flame retardant performance. This test method is use the standardize flame to burn the sample surface within the prescribed time, ob...
... to helmet standards GB/T2812-2006 and GB 2811-2007, this tester is primarily used for safety helmet fire retardant testing. Widely utilized by special labor protection supplies supervision and inspection st...
... clause 4.7.3, IEC60065:2014 clause 14.1, 20.2.1, 20.2.4, Annex G, IEC60335-1 clause 30, etc. It simulates the influence of early-stage flame when there is a fire around the...
SD-2801A Needle Penetration Tester The PRC Standard GB/T4985, GB/T269 ISO 2137:1985 SD-2801A Needle penetration tester SD-2801A needle penetration tester is designed and manufactured in accordance with the PRC ...
... were tested in a sealed oven with a radiant heat source of 2.5 w/cm2. Beam attenuation tests were performed under open flame and non-flame conditions, respectively. The entire test was conducted for 20 minu...
...Test Device Uses Propane burning performance test device for conveyor belt roadway is suitable for propane combustion performance test of coal mine fabric whole core flame retardant conveyor belt. Overview C...
... burning behaviour and spread of flame of horizontally mounted floorings exposed to a heat flux radiant gradient in a test chamber, when ignited with pilot flames. Standard: - GB/T11785-2005 - ISO 9239-1,2 -...
... and appliances. It meets the requirements of standards IEC60695-11-3, IEC60695-11-4, IEC60695-11-10, IEC60695-11-20 and UL94. The test chamber has an inside volume of at least 0.5m3. The chamber has a...
.... The test method is designed to comply with 16 CFR Part 1610. Scope of application It is mainly used to test the burning performance of medical masks after contacting the flame at a certain linear speed.Abl...
...testing machine Lab testing machine Application: When a certain amount of gas is supplied to the box and the standard ignition source is used to ignite the flame, this instrument can be used to test the abil...
... and Apparatus for Testing the Flame Retardance of Resilient Filling Materials Used in Upholstered Furniture ASTM D6413 Standard Test Method for Flame Resistance of Textiles (Vertical Test) ISO6940/6941 –Tex...
... ISO 1210: 1992 and other standards. The flammability test is to use a certain size of the Bunsen burner (Bunsen burner) and a specific gas source (methane or natural gas), according to a certain flame heigh...
Fire Testing Equipment with 1kW Test Flame and IEC/ EN 60332-1 Test Apparatus *, *::before, *::after {box-sizing: border-box;}* {margin: 0;}html, body {height: 100%;}body {line-height: 1.5;-webkit-font-smoothin...
IEC 60950-1 Hot Flaming Oil Test Device Control For Test Flammable Liquids In Electronic Equipment Product Information: The flammability test of thermal combustion oil test device is designed and manufactured a...
...fire tests -- Ignitability of building products subjected to direct impingement of flame -- Part 2: Single-flame source test" Scope of application: It is applicable to the test method for judging whethe...
Hot Flaming Oil Flammability Test Chamber IEC 62368-1 Thermal Combustion Oil Test Device Product Information: The flammability test of thermal combustion oil test device is designed and manufactured according t...
...: GB/T8626 "Test Methods for Flammability of Building Materials" and ISO 11925-2:2002 "Reaction to fire tests -- Ignitability of building products subjected to direct impingement of flame -- P...