| Sign In | Join Free | My burrillandco.com | 
 | 
 
                    ... in any direction relative to the opening: − with a force up to 45 N for a strip-cut type device; and − with a force up to 90 N for a cross-cut type device. Test Finger Probe NOTE Media destruction devices a...
 
                    ...test method of the NBS smoke density test box originated from the National Institute of Standards and Technology (NIST, formerly NBS) and is now widely used in multiple testing fields. This test method is su...
 
                    ... of unquenched steel, cast iron, non-ferrous metals and soft bearing alloys, etc. Standard: ASTM E10-2018 Standard Test Methods for Brinell Hardness of Metallic Materials ISO 6506-2:2017 Metallic materials -...
 
                    ... amount and liquid core absorption rate, etc. [Meet the standard] FZ/T 64012.2 spunlaced nonwovens - part 2: sanitary rolls GB/T 24218.6 textile non-woven fabrics -- test methods -- part 6: determination of ...
 
                    ....2-2012 Metallic materials - Brinell hardness test - Part 2: Verification and calibration of testing machines ASTM E10-2018 Standard Test Methods for Brinell Hardness of Metallic Materials ISO 6506-2:2017 Me...
 
                    ...Testing Equipment Non- Combustibility Tester Scope: It is mainly applicable to the test method to determine the combustion performance of building materials under specified conditions. It is applicable to te...
 
                    ...Testing Equipment Non- Combustibility Tester Scope: It is mainly applicable to the test method to determine the combustion performance of building materials under specified conditions. It is applicable to te...
 
                    ...test method can be used to measure the flame retardancy of the elastic non-woven ground layer (such as refractory rubber coating, refractory polyethylene asbestos tile and fire-proof linoleum). Meet the stan...
 
                    ...Test For Plastics For Fire Retardant Coating Scope of application: The test method can be used to measure the flame retardancy of the elastic non-woven ground layer (such as refractory rubber coating, refrac...
 
                    ...protected by a protective plate. The new energy automobile sand dust test chamber is a fine sand or dust that can simulate the real environment in advance to the industrial machinery. Or the destructive test...
 
                    ... load, test time, nominal load. The menu on LCD is controlled by keyboard, and test data is printed on board. There are two experimental methods: set value holding test and destructive pull-out test. It can ...
 
                    ...plurality of single cells, and the battery is protected by a protective plate. The new energy automobile sand dust test chamber is a fine sand or dust that can simulate the real environment in advance to the...
 
                    GTJ-XSY steel corrosion meter Usage overview The corrosion of the steel bars in the structural concrete causes the effective cross-sectional area of the steel bars to decrease and the volume to increase, which ...
 
                    ...Test Pieces Preparing Machine Cable Testing Equipment Product information: The test device conforms to IEC60811-1-1:2001,IEC60811-1-3:2001,IEC60811-2-1:2001, and etc. It is used to prepare the dumbbell Test ...
 
                    ...Test Pieces Preparing Machine Cable Testing Equipment Product information: The test device conforms to IEC60811-1-1:2001,IEC60811-1-3:2001,IEC60811-2-1:2001, and etc. It is used to prepare the dumbbell Test ...
 
                    ...instrument which is designed for testing various kinds of bottle lid torque. It main used in testing and calibrating tighten force, parts torsional destructive testing, etc. With features of simple operation...
 
                    ... Method System For Mineral Exploration What is TEM? Transient Electromagnetic (TEM) is a geophysical technology that responds most strongly to conductive materials and is used to obtain vertical resistivity ...
 
                    ... materials (rubber, plastic, woven, steel materials, ceramics, etc.) It meets with the requirements of GB/T228-2002, Tensile Testing Method of Metal Materials at Room Temperature. It is widely used in aerosp...
 
                    ...Testing Machine For Composite Materials Brief Introduction This machine is for the stretching, compressing, cutting tests of metal, non-metal and composite materials (rubber, plastic, woven, steel materials...
 
                    ... magnetic substrate on the non-magnetic coating, coating thickness. Can be used in the laboratory, also can be used in the engineering field. The instrument can be widely used in manufacturing, metal process...