| Sign In | Join Free | My burrillandco.com | 
              
  | 
      
                    ...devices are available. Suitable for output devices: TVs, CD players, DVD players and other input devices: audio, power amplifiers, etc. 2. Gold-plated connector reduces sound quality loss effectively reduces...
                    ...Optic Receiver CATV FTTH Optical Node Model:JZOR1000RI-2AVmN Performance features: * 5~1000MHz optimized circuit design; * High responsivity PIN optic electricity conversion, high reliability, input optical ...
                    ...Optic Receiver CATV FTTH Optical Node Model:JZOR1000RI-2AVmN Performance features: * 5~1000MHz optimized circuit design; * High responsivity PIN optic electricity conversion, high reliability, input optical ...
                    ... Ratio: 130 dB Output Current per Channel: 50 mA Ib - Input Bias Current: 70 pA Vos - Input Offset Voltage: 1 uV en - Input Voltage Noise Density: 55 nV/sqrt Hz Supply Voltage - Max: 5.5 V Supply Voltage - M...
                    ... V GBP - Gain Bandwidth Product: 3 MHz Output Current per Channel: 20 mA SR - Slew Rate: 13 V/us Vos - Input Offset Voltage: 10 mV Supply Voltage - Min: 7 V Minimum Operating Temperature: 0 C Maximum Operati...
                    ...Amplifier IC Chip Product Description: The OPA990IDBVR is an amplifier IC chip designed for use in a variety of applications with low voltage, low power, and high accuracy. It features an output buffer, high...
                    ...amplifier black in Class A Description 1,Biasing: The output transistors or tubes of a Class A amplifier are biased such that they are always conducting, even when there is no input signal. This ensures that...
                    ...sources, such as a preamplifier, mixer, or audio interface. Each channel of the amplifier takes a low-level input signal and increases its power level to drive speakers or other audio devices. Power Output: ...
                    ...Amplifier PM Coupler The 2x2 1064nm Polarization Maintaining Coupler is an optical component that allows the splitting or combining of optical signals. Specifically, it has two inputs and two outputs, and it...
                    ...unbalanced; It’s with 1 channel output. 1U standard rack mount design. Multiple input: 5 Mic input, 3 AUX input and 1 EMC input. Mic 1 has highest priority and EMC input has the second. Each input has indivi...
                    ...unbalanced; It’s with 1 channel output. 1U standard rack mount design. Multiple input: 5 Mic input, 3 AUX input and 1 EMC input. Mic 1 has highest priority and EMC input has the second. Each input has indivi...
...Optical Amplifier Advantages ► O-band, 1260~1340; ► Power up to 10dBm; ► 3 work modes, ACC, APC and AGC, for constant pump current, output power or gain are selectable; ► DB9 port for RS232 communication and...
                    U8331MA-30 single channel EDFA Product Model U8331MA-30 Parameter Min Typ Max Units Working wavelength 1530 1565 nm Output Power 0 dBm Input power -40 -10 dBm Gain 30 dB Noise Figure (@-30dBm input) 4.5 5.0 dB ...
                    ...Amplifier IC Chips Op Amps Dual Lw Pwr JFET Op JFET-Input Operational Amplifier Package SOIC-8 Mounting Style: SMD/SMT Package / Case: SOIC-8 Number of Channels: 2 Channel Supply Voltage - Max: 30 V GBP - Ga...
                    ...optical amplifier module, the driving circuit, and the communication circuit in an aluminium case. The COA is an external and independent amplifier and does not occupy a slot in the subrack. The COA can work...
                    ...optical amplifier module, the driving circuit, and the communication circuit in an aluminium case. The COA is an external and independent amplifier and does not occupy a slot in the subrack. The COA can work...
                    ...optical amplifier module, the driving circuit, and the communication circuit in an aluminium case. The COA is an external and independent amplifier and does not occupy a slot in the subrack. The COA can work...
                    ...optical amplifier module, the driving circuit, and the communication circuit in an aluminium case. The COA is an external and independent amplifier and does not occupy a slot in the subrack. The COA can work...
                    ...optical amplifier module, the driving circuit, and the communication circuit in an aluminium case. The COA is an external and independent amplifier and does not occupy a slot in the subrack. The COA can work...
                    ...optical amplifier module, the driving circuit, and the communication circuit in an aluminium case. The COA is an external and independent amplifier and does not occupy a slot in the subrack. The COA can work...