| Sign In | Join Free | My burrillandco.com |
|
... widely used indoor for measuring current, electric energy and protective relaying in the isolated neutral system with the frequency 50-60Hz and highest voltage for equipment 36 kV. Remarks: Upon request we ...
... and double pole insulated VT, is widely used for measuring current, electric energy and protective relaying in the isolated neutral system with the frequency 50Hz or 60Hz and insulation voltage 36 kV (Up to...
... and double pole insulated VT, is widely used for measuring current, electric energy and protective relaying in the isolated neutral system with the frequency 50Hz or 60Hz and insulation voltage 36 kV (Up to...
... and double pole insulated VT, is widely used for measuring current, electric energy and protective relaying in the isolated neutral system with the frequency 50Hz or 60Hz and insulation voltage 36 kV (Up to...
...isolation switchgear medium voltage transformer ring main unit C-GIS fixed cable bushing ring type CT, The secondary windings are full enclosed in the flame retardant plastic shells.primary bushing or cable ...
... storage capabilities. Rich Interfaces:Digital Input/Output (DI/DO): Supports multiple isolated DI (dry/wet nodes) and relay/high-low side drive DO, meeting the switching control requirements of industrial e...
...other modules - Relay and solid-state switching modules - Dual channel variants - 6.3 mm per channel - Proximity detector inputs - Electronically fused - Direct ......
Switch Amplifier KFD2-SR2-Ex1.W 1-channel isolated barrier, 24 V DC supply (Power Rail), Dry contact or NAMUR inputs, Relay contact output, Line fault detection (LFD), Reversible mode of operation, Up to SIL 2 ...
Switch Amplifier KFD2-SR2-Ex1.W 1-channel isolated barrier 24 V DC supply (Power Rail) Dry contact or NAMUR inputs Relay contact output Line fault detection (LFD) Reversible mode of operation Up to SIL 2 (SC 3)...
Switch Amplifier KFA6-SR2-Ex2.W 2-channel isolated barrier, 230 V AC supply, Dry contact or NAMUR inputs, Relay contact output, Line fault detection (LFD), Reversible mode of operation, Up to SIL 2 acc. to IEC/...
.../DC NO, 2M PUR CABLE 1-channel isolated barrier Universal usage at different power supplies Input for NAMUR sensors or dry contacts Input frequency 1 mHz ... 5 kHz Current output 0/4 mA ... 20 mA Relay conta...
Switch Amplifier KFA6-SR2-Ex2.W Dry Contact Or NAMUR Inputs < 2-channel isolated barrier < 230 V AC supply < Dry contact or NAMUR inputs < Relay contact output < Line fault detection (LFD) < Reversible mode of ...
... Input For Approved Dry Contacts Or SN/S1N Sensors 1-channel isolated barrier 24 V DC supply (Power Rail) Input for approved dry contacts or SN/S1N sensors Active voltage output Relay contact output Fault in...
...NAMUR Inputs KFD2-SR2-Ex1.WSwitch Amplifier Key Benefits at a Glance 1-channel isolated barrier 24 V DC supply (Power Rail) Dry contact or NAMUR inputs Relay contact output Line fault detection (LFD) Reversi...
Switch Amplifier KFD2-SR2-Ex1.W 1-channel isolated barrier, 24 V DC supply (Power Rail), Dry contact or NAMUR inputs, Relay contact output, Line fault detection (LFD), Reversible mode of operation, Up to SIL 2 ...
Switch Amplifier KFA6-SR2-Ex2.W 2-channel isolated barrier, 230 V AC supply, Dry contact or NAMUR inputs, Relay contact output, Line fault detection (LFD), Reversible mode of operation, Up to SIL 2 acc. to IEC/...
Switch Amplifier KFD2-SR2-Ex1.W 1-channel isolated barrier 24 V DC supply (Power Rail) Dry contact or NAMUR inputs Relay contact output Line fault detection (LFD) Reversible mode of operation Up to SIL 2 (SC 3)...
..., -5/40L, -5/46, -5/60, -5/60L, -5/80, -5/86: 3.3A @ 5Vdc Isolation Voltage Communication Ports - tested to 500V for 60 seconds Relay Cartridge - tested to 1000V for 60 seconds Operating Temperature IEC 6006...
... equipment are fully considered, for example, the functions of ground fault detection, fault signal upload and fault isolation shall be realized, and the precise linkage and cooperation with the control unit...
...multi-function SPST relays and 2 high-precision 0/4~20mA current outputs. The operating temperature of the controller is 0~60℃. The protective grade of the turbidity controller is IP66, which can effectively...