| Sign In | Join Free | My burrillandco.com |
|
...protect against surges affected by indirect lightning and direct lightning The main technical parameters Model and specification U1-II20X Uc(VAC)Maxi continuous operating voltage 750,420,385,320,275 Vac Up(k...
...protect against surges affected by indirect lightning and direct lightning The main technical parameters Model and specification U1-II20X Uc(VAC)Maxi continuous operating voltage 275, 385,420,440 Vac Up(kV)V...
... protect low-voltage consumer systems from overvoltages of all types and are available in single-pole to four-pole versions. The use of high-performance varistors permits a rapid response time and a low prot...
... protection. In order to avoid short circuit of the power supply, a voltage-limiting element must be connected in series. 2. The surge current flowing through the lightning protection components must be less...
...Protective Device Decoupler Series MYT10 60/10 Features low clamping voltage Fast response (<25ns) Reliable connection and easy installation Technical Parameters Spec. Maximum continuous operating voltage, Uc (AC) Protection level Up with In (V) Nominal discharge surge current In(8/20) (KA) Max. discharge surge current......
... lines with current less than 63A in power distribution systems. When the lightning current invades the line, the installed decoupler can make the first-level SPD of the line act first, release most of the l...
... of the original system. Features Great absorbing capability , low clamping voltage. Fast response(≤100ns) Zero power consumption with no leakage current. With dual self-protection circuit of over current an...
...High energy surge protection. • Failure detection indicator. • Maximum continuous operating voltage Uc: 150VAC, 275VAC, 320VAC. • Impact current limp(10/350μs) : 25kA • Nominal discharge current In(8/20μs): ...
...Current Detection for PFC Stage Quasi-Resonant Operation for PWM Stage Internal Minimum tOFF 8 μs for QR PWM Stage Internal 10 ms Soft-Start for PWM Brownout Protection High / Low Line Over-Power Compensatio...
...*Series Discharge current same as bms Charge Current Depends on parameters Overcharge protection 3.65V+0.025V Detection Delay: 1000+500ms Release Volt 3.55V+0.05V Overdischarge Protection 2.35+0.1V Detection...
...Protection IC is an integrated circuit protector designed to provide protection from transient, over-temperature, over-voltage, and over-current faults. It features a minimum operating temperature of -40℃ an...