| Sign In | Join Free | My burrillandco.com |
|
...reference) 1.1 General description This is a type of fast lead time required multilayer PCB built on FR-4 substrate with Tg 150°C for the application of Power Supply Switch. It's standard 1.60 mm thick, whit...
...) 1.1 General description This is a type of 3.0mm thick PCB built on double sided FR-4 substrate with Tg 150°C for the application of data acquisition. It's small round circuit board panelized 48 up. V-cut (...
...PCB on 0.4mm FR-4 ITEQ 4 Layer Circuit Board for Security Systems 1.1 General description This is a type of 4 layer printed circuit board built on FR-4 substrate with mid-Tg 150°C for the application of Secu...
...PCB On 1.0mm Epoxy Glass ITEQ FR-4 2 Layer Circuit Board for USB Charger 1.1 General description This is a type of 2 layer printed circuit board built on FR-4 substrate with Tg 170°C for the application of U...
...Tg170 substrate for the application of codec equipment. It's 2.0 mm thick with white silkscreen on green solder mask and immersion gold on pads. The PCBs contains 2+N+2 high density interconnection layer...
...FR-4 substrate with Tg 170°C for the application of POS System. 50 ohm coplanar impedance with 15mil track/11mil space on bottom layer 4. It's 1.60 mm ......
PCB Spacer FR-4 Spacer Block Space Bar On 1.5mm FR4 with Drill Holes only 1.1 General description This is a type of no copper PCB built on FR-4 Tg135 substrate for the application of spacer. It's 1.57 mm thick ...
Thick Printed Circuit Board 3.0mm Double Sided PCB Built On FR-4 With Immersion Gold for Data Acquisition. 1.1 General description This is a type of 3.0mm thick PCB built on double sided FR-4 substrate with Tg ...
Thin PCB 4 Layer Thiner Circuit Board Built On 0.4mm FR-4 With Immersion Gold for Data Acquisition 1.1 General description This is a type of 4 layer PCB board built on FR-4 Tg135 substrate for the application o...
... substrate is a combination of metal based high frequency materials. The intermediate medium is made of high frequency materials (such as PTFE and others), one side is coated with copper foil, the other side...
...Introduction This is a type of single sided circuit board built on FR-4 substrate with CTI 600V. It is a 2.0mm thick PCB with simple tracks, green solder mask and white silkscreen. The surface finish on pads...
...75mil 1.905mm RF PCB With Pure Gold Plated. (Printed Circuit Boards are custom-made products, the picture and parameters shown are just for reference) General Description This type of Microwave PCB is built ...
... shown are just for reference) Brief Introduction This is a type of Taconic high frequency PCB using RF-35A2 substrate which is ultra low loss power amplifier material. It’s built on 20mil core with 1oz copp...
...just for reference) General Description This is a type of low weight antenna PCB made on Taconic TLY-5Z substrate with 30mil thickness, starting 0.5oz copper, finished 1oz copper, green solder mask on both s...
...PCB 50mil 1.27mm Double Sided Microwave Circuit Board With Immersion Silver (Printed Circuit Boards are custom-made products, the picture and parameters shown are just for reference) General Description This...
...just for reference) General Description This is a type of antenna PCB made on Rogers RO4535 with 30mil substrate, starting 0.5oz copper, finished 1oz copper. Green solder mask is printed on top side and imme...
...) General Description This is a type of double-sided microwave PCB built on 31mil DiClad 870 substrates. It is a simple printed circuit board without solder mask or silkscreen. The surface finish of pads are...
...thickness of 6mm. It is a conductive slip ring that is thinner than SenRing K series pancake slip ring. SenRing innovatively uses PCB substrate, ultra-hard gold plating treatment, and ultra-thick copper foil...
4-Layers Flex PCB Yellow Cover Film 0.2mm ENIG 1oz 0.2mm 4.87*82.26mm Flexible Printed Circuit Boards (Flex PCBs) are circuit boards that are built on flexible, rather than rigid, substrates. They are made from...
6-Layers Rigid-Flex PCB Green Cover Film 1.4mm ENIG 103.56*36.1mm Rigid-Flex PCBs allow for greater design flexibility as components can be mounted to both rigid and flexible substrates. The flexible parts of t...