| Sign In | Join Free | My burrillandco.com |
|
...PH Textile Testing Equipment With Computer Chip And LCD Display PH Meter Advantages and Features 1.New and high performance computer chip was adopted, LCD display. 2.A variety of automatic calibration mode 3...
Ph And Orp Sensor It Requires No Reagents, Causes No Pollution And Is More Convenient For Later Maintenance 1.Product Overview The KNF-101A PRO ORP sensor is a newly designed sensor. Based on numerous on-site a...
0-14 PH Analytical Surver Electrode PH Probe BNC Plug Connector Aquarium Meter Controller Gib Digital PH Sensor Electrode # Gib Digital PH Sensor Electrode Properties 1. Gently remove the protective bottle from...
1.0mm wire test probe,test probe C iec 61032 IEC 529 IP3X code for impact and access testing Model TP03 Test Sphere Probe Test Probe is intended to verify the protection of person aganist access to to harzardou...
...Probe Testing Equipment for Children Safety Toys Test Description: The simulated finger is designed according to the standard of ASTM F963 and EN-71 as well as16CFR 1500.48,49. It is used to test whether the...
...Probes Toys Testing Instrument Fake Finger Touch Probe Testing Equipment Description: To determine whether any part or component of a toy can be contacted by the probe. The probe simulates the finger of the ...
...Probes Toys Testing Instrument Fake Finger Touch Probe Testing Equipment Description: To determine whether any part or component of a toy can be contacted by the probe. The probe simulates the finger of the ...
...Test Set Electrical Contact Indicator for Probe Testing Introduction The electrical contact indicator is designer according to the requirements of “Household and similar electrical general requirements for s...
389-01-10-54 389/389VP General Purpose pH/ORP Sensors The 389 and 389VP General Purpose pH/ORP Sensors are housed in a molded Tefzel body with 1 in. MNPT forward and rear facing threads suitable for insertion, ...
UL1278 Figure 8.4 Articulate Probe Test Probe B - Verify Accessibility of Live Parts Product information: An electrical part of a heater shall be so located or enclosed that protection against unintentional con...
... is used for testing the protection of thermal radiation heaters which are fixed or portable visibly. This bar is intended to verify the preotection of fixed and portable visibly glowing radiant heaters. Tes...
iec 60529 IP3X code wire test probe Model TP03 Test Sphere Probe Test Probe is intended to verify the protection of person aganist access to to harzardous parts of an IP3 code.Also used to verify protection fro...
Pure water RO water Deionized water pH Electrode Analog pH Sensor >>Technical Parameter pH Range:‌ 2-12 pH ‌pH Zero Point:‌ 7.00±0.25 ‌Temperature Range:‌ 0-80℃ ‌Pressure Resistance:‌ 0-0.3 MPa Temperature Sens...
Soil pH Electrode Analog pH Sensor >>Technical Parameter ‌pH Range:‌ 0-14 pH ‌pH Zero Point:‌ 7.00±0.25 ‌Temperature Range:‌ 0-80℃ ‌Pressure Resistance:‌ 0-0.3 MPa ‌Temperature Sensor:‌ None (standard), customi...
...PH & Conductivity Testing Equipment Introduction The International Electrotechnical Commission IEC 60754 Part 1 and Part 2 test is performed to determine the degree of acidity of gases evolved during the com...
Common Water Water Analog PP pH Electrode pH Sensor For general use >>Technical Parameter pH Range: 2-12pH pH Zero Point: 7.00±0.25 Temperature Range: 0-80°C Pressure Resistance: 0-0.3MPa ‌Temperature Sensor:‌ ...
Corn Slurry Applications Analog pH Electrode pH Sensor >>Technical Parameter pH Range: 0-14pH pH Zero Point: 7.00±0.25 Temperature Range: 0-100°C Pressure Resistance: 0-0.6MPa ‌Temperature Sensor:‌ OEM ‌Housing...
IEC61032 Fig7 Device 11​ Rigid Finger Probe Test Finger Probe Main specification and corresponding technical parameters: Parameters /Model SC-F711-F1 SC-F711-F2 SC-F711-F3 Name Test finger Test finger with 50N ...
IEC61032 Fig7 Device 11​ Rigid Finger Probe Test Finger Probe Main specification and corresponding technical parameters: Parameters /Model SC-F711-F1 SC-F711-F2 SC-F711-F3 Name Test finger Test finger with 50N ...
...Probe Testing the Limited Access to Telecommunications Voltages The Blunt probe is required in IEC62368,IEC 60950,IEC 60065, UL and CSA Standards. It is used to check the limited access to Telecommunications...