| Sign In | Join Free | My burrillandco.com |
|
...Test Finger Probe Products information: This rigid finger probe conforms to the standard requirement of IEC61032 figure 7 device 11,IEC60884,IEC60598,IEC60335,IEC60065. It is used to verify the protection of...
10N / 20N / 30N Test Finger Probe For Non-Removable Components , IEC 60335 Figure 7 Product information: The test finger nail complies with the IEC 60335 figure 7 standard requirements. It is applicable for the...
... with the testing probe for the convenience and correctness. In the two output electrodes, the low potential (the red one) is connected with the energized part of the electrical appliance and the high potent...
... contact with the relevant parts. Test sample: Electrical socket-outlet or similar electrical appliances and other hazardous live part. Feature: In the two output electrodes, the low potential (the red one) ...
...Test Equipment Test Sphere Probe With Force Of 0-50N This probe is intended to verify protection of persons against access to hazardous parts for an IP1 Code. Also used to verify protection from access with ...
...Test Finger Probe For Measuring Surface Temperatures 0.3mm Thermocouple IEC60335-2-11 11.101 Cooking ranges and ovens are placed as specified in 11.2. However, appliances intended to stand on the floor are p...
...General requirements clause 24.17 and 24.18, figure 32. Application with IEC Test Equipment: It is used to check the contour line of the cover or the cover plate. It has become an indispensable and important...
... or organic film test, such as: electroplating, anode processing, conversion coating, painting, ect. Characteristics: 1. Spray nozzle the heart of teser adopt Bo Nute ......
... and accuracy comply to standard ISO6508. With the bench stand it can be used on the desk as well as on site. Tests the hardness of thin plate, slim pipe, thin shaft, small ball and small stampings, workpiec...
... is added to the test strip which reacts to certain pathogens in the urine. This will cause a reaction that results in different colors, which indicates the presence or absence of the disease. The test strip...
Aquarium Ammonia Water Test Kit Ph Free Chlorine Bromine Water Test For Swimming Pool Description: The UV Aging Test Lamp is an effective tool for the sunlight resistant test of non - metallic materials used in...
...Test Bench Specimen Environment Tester Specimen Temperature Humidity Test Apparatus Product Description Overview The alternating wet and dry test apparatus measures the temperature, humidity, and pH of the t...
... for anti-electric shock test when equipped with amphenol connector. Or used for enclosure protection test when open threaded hole of M6 at the end of the handle (connected with pull and push dynamometer) .T...
... for anti-electric shock test when equipped with amphenol connector. Or used for enclosure protection test when open threaded hole of M6 at the end of the handle (connected with pull and push dynamometer) .T...
IEC 61032 Test Probes Protection of Persons and Equipment by Enclosures-Probe for Verification Standards & Clauses: IEC61032:1997 “Protection of persons and equipment by enclosures-Probe for verification” IEC60...
...Test Probe Of Figure V.3 Product information: The blunt probe of figure V.3 conforms to IEC 62368-1:2018 clause 5.3.2, 5.4.10, V.1.4 and figure V.3, IEC60950 figure 2C, IEC60065 figure B1, IEC62151 figure 3 ...
...Probe ultrasonic testing probes repair crtstal 1. Frequency: 5.0-8.0Mhz 2. Compatible system: Voluson S10, Voluson P8 3. Application: OB/GYN & urology 4. original, in good working condition 5. With 90 days w...
..., it can test 6sections in one time. It can be used to test the large diameter piles with more than 4pcs sonic tubes. It can also be used for testing the DWALL defect. With the strong probe signal, the probe...
...Test Rig 11, GB/T16842 Test Probe 11, GB8898, IEC60065, IEC60598, GB7000, IEC60335, GB4706 and other standard requirements. It can also be used to test the mechanical strength of the holes in the housing or ...
... Live Parts Probe Product information: This testing probe is used to verify the protection against access to hazardous parts through top openings. It meets IEC, EN, UL and CSA Standards, including IEC 1010, ...