| Sign In | Join Free | My burrillandco.com |
|
... of different specifications; it is convenient to move and change test molds, and it adopts a combination of touch screen and buttons to facilitate personnel operation; it has self-diagnosis and remote autom...
IEC60695 Horizontal-vertical Flame Test Apparatus Flammability Testing Equipment Products information: The series of horizontal-vertical flame test apparatus are designed and manufactured according to the stand...
Fluorescent Lamp Holder Axial Force Tester Product information: The test equipment is designed and manufactured according to IEC60598-1 clause 4.4.4 standard test item requirements, test content: axial pressure...
Electronic IEC Ingress Protection Test Equipment IPX5 IPX6 Hose Nozzle Test Device Product information: The HT IPX5/6 Handheld Jet Nozzle is designed and manufactured according to IEC60529 clause 14.2.5 and cla...
...Test Equipment IEC60695-11-5 Flammability Tester Product information: HongTong upgrades the previous needle flame tester to b e PLC control version one, the new PLC 7 inch automated needle flame test apparat...
... standard requirement of ISO 4532. It is used to judge the impact resistance of the vitreous and porcelain enamels. As the below picture shown, this test apparatus is made up with a striking bolt with a 5 mm...
110mm IEC Test Equipment Aluminum Vessel For Testing Induction Hotplates Products Introduction: It conforms to the standard requirements of IEC60335-2-9 / GB4706. 14. 110, 145, 180, 220, 300mm, one set with 5 p...
4 Pcs Plug Test Apparatus IEC Test Equipment For Lateral Stress Product details: The appliance conforms to the standard of IEC60884-1 clause 13.14 figure 13. It is suitable for checking socket which ......
...Introduction: This test equipment is designed and manufactured as per Iec 60529 2013 clause 14.2.8. Test for second characteristic numeral 8: continuous immersion subject to agreement. Unless there is a rele...
...60432-1 Lamp Foot Twist Apparatus Light Testing Equipment Product information: This apparatus confirms to the standard of IEC 60432-1. For testing all kinds of lamps, energy-saving lamps of the torque test. ...
Intelligent Test Meter For Lamp Cap And Holders Light Testing Equipment With Digital Display Product information: Lamp cap twist apparatus EOB-2 built in intelligent microprocessor, is a new generation of intel...
...IEC60245-2 clause 3.1 Figure 1 Rubber insulated cables-Rated voltages up to and including 450/750 V-Part 2: Test methods. Application:It is used for checking mechanical strength of completed flexible cables....
IEC60255-5 Test Equipment Impulse Voltage Test Generator Parameters: Output voltage 12kV (Max) 5 Impulse wavefront time: Impulse wavefront time: Impulse wavefront time: 1.2s 30 Half value of after wave tim...
... Test Device for Cellphone Notebook 0~5Bar This IPX8 pressure water tightness test equipment is designed and manufactured according to IEC60529: 2013 "Enclosure protection class (IP code)", it uses...
... and IPX6, IEC60884-1, IEC60335-1, IEC60598-1. Application: It is used for the testing of IPX5 and IPX6. It can be used in a wide range of applications, such as lamps, auto parts, electrical appliances, cabi...
...test equipment is designed and manufactured according to 4.14.3 of IEC 60598-1, mainly used for the lamps adjustment devices’ torsion, and bending test of the table lamps with adjustable tilt and position , ...
...ween the access probe and hazardous parts. For the test of first characteristic numeral 1 , the access probe 50 mm diameter shall not completely pass through the opening. IP code probes are intended to ......
... 12.3 Acceptance conditions The protection is satisfactory if adequate clearance is kept between the access probe and hazardous parts. For the test of first characteristic numeral 1 , the access probe 50 mm ...
IEC60529 IP4X Ingress Protection Test Equipment Test Rod Probe D 1 mm diameter Standard:IEC61032 figure 4 and IEC60529 for IP4 and IEC60065. Standard description: 13.2 Test conditions for first characteristic n...
IEC60332-1 Flammability Testing Equipment Single Cable Vertical Burning Test Device Purpose of examination: When the wire and cable products are short circuited or contact with fire, the insulation or sheath m...