| Sign In | Join Free | My burrillandco.com |
|
...Pneumatic Air Solenoid Valve 1/4'' 4V210-08 AC220V AC110V 4V210-08 Airtac type pneumatic solenoid valve, single solenoid, 5/2 way, 1/4" inlet and outlet port size, 1/8'' exhaust port size, internal pilot, te...
...Airtac Type Push Pull Pneumatic Air Control Valve 5/2 Way The 4L210-06 is a manual pneumatic directional valve with a 5 way operation & 5 ports (P = Pressure, A = Outlet, EA = Exhaust for port A). 5 way, 2 p...
...seal off its seat. Because the seat is positioned under an angle, the flow is minimally impeded in the open position, resulting in an excellent flow rate and a low pressure loss. They are used to regulate th...
...seal off its seat. Because the seat is positioned under an angle, the flow is minimally impeded in the open position, resulting in an excellent flow rate and a low pressure loss. They are used to regulate th...
...Pneumatic Jacket ball valve BRAND Veson ORIGIN China Packing Plywood case Class / Rating 150#---600# PN16-PN110 Size 1/2"-24"DN15-DN600 Materials Body Material : Carbon steel, Stainless steel, Duplex stainle...
...Description: Our Pressure Sustaining Valve is built to withstand high pressure, with a maximum pressure rating of PN25. This means that it can handle a pressure of up to 25 bar, ensuring that your pipelines ...
...Pressure Regulating Valve 034L0052 A CPR or Crankcase Pressure Regulator is nothing more than a pressure reducing valve. When installed on a compressor suction inlet and properly adjusted, the CPR will preve...
... 82 * Height 171 Normal operating water pressure (MPA) 1.5 Maximum water pressure resistance (MPA) 3 Inlet size G2 Outlet Caliber G2 technical requirement 1. Normal operation at 0-80 degrees Celsius. 2 Ensur...
... 82 * Height 171 Normal working pressure (MPA) 0.6 Maximum pressure resistance (MPA) 1.5 Inlet size G2 Outlet Caliber G2 technical requirement 1. Work normally at 0-80 degrees Celsius. 2.Ensure that the pres...
...upstream pressure or flow rate fluctuation. The main valve is controlled by P200 (creating a minimal differential in open position) to control the water in upper chamber to regulate the outlet pressure. No. ...
... Pressure 2~8bar Surface Treatment hard anodizing Working Temperature Normal Temperature: -20ºC(-4°F) ~ 80ºC (+176°F); High Temperature: -15ºC(+5°F) ~ ......
ball valve witth pneumatic actuator pneumatic flow control valves Pneumatic actuator Material Extruded Aluminum alloy Rotary Angle 0~90 degree Structure rack and pinion rotary actuator Working Pressure 2~8bar S...
...pinion rotary actuator Working Pressure 2~8bar Surface Treatment hard anodizing Working Temperature Normal Temperature: -20ºC(-4°F) ~ 80ºC (+176°F); High Temperature: -15ºC(+5°F) ~ ......
... Pressure 2~8bar Surface Treatment hard anodizing Working Temperature Normal Temperature: -20ºC(-4°F) ~ 80ºC (+176°F); High Temperature: -15ºC(+5°F) ~ ......
Pneumatic ball valve Pneumatic Actuator Control Valves Pneumatic actuator Material Extruded Aluminum alloy Rotary Angle 0~90 degree Structure rack and pinion rotary actuator Working Pressure 2~8bar Surface Trea...
Pneumatic ball valves actuator pneumatically operated ball valve Pneumatic actuator Material Extruded Aluminum alloy Rotary Angle 0~90 degree Structure rack and pinion rotary actuator Working Pressure 2~8bar Su...
... will dictate how much power is required. It will also tell you whether a direct acting, internally or externally piloted valve is needed. How quickly does the valve need to open or close? Piloted valves tak...
JDF1400 / JDF1500 Pneumatic Angle Seat Valve , SS 304 Pneumatic Drain Valve 2/2 - Way Drain Valve Pneumatically Operating , For medium up to +120 C , Threaded Port and Tri - Clamp Connection DN 15 - 50 Acting T...