| Sign In | Join Free | My burrillandco.com |
|
...surface. F901 release film: It uses HDPE plastic film as carrier, has a barrier layer, which has anti-outwearing and non-discoloration to maintain the viscosity of asphalt. It also No ......
...Release Film For Butyl Tapes Description: HDPE Siliconized Release Film For Butyl Tapes Material: HDPE(Also can do PP, PET ect.) Thickness: 0.03-0.15mm(Be customized) Width: 100-2000(Other can be customized)...
...Release Liner Description: It is PP plastic film as carrier, silicon coated on one side or both side by UV or Thermal curing type depends on the applications. High Temperature Resistance, can do 150-180℃. Ac...
... Release Film overcomes the shortcomings of ordinary hydrophilic PE Release Film, such as low temperature resistance and low Subsequent adhesion rate. High temperature resistance, high residual connection an...
...n variant of the material, commonly employed in applications that necessitate an inconspicuous and vibrant red release liner. Here are some potential application scenarios for the 25-micron red PET fluorosil...
... on one side or both side.the higher PE and silicon coating on the base paper,the release paper become more glossy & stronger. It is easy to be attached dust during PE and silicon coating process in the dust...
... and clean without wrinkles/tears/granules/bubbles/pinholes or other defects. This highly conformable product bonds well to most surfaces over a wide range of temperatures and release film is heavily used in...
Red Color HDPE Release Film Red Color HDPE Silicone Coated Release Liner For Foam Tapes Description: Release film refers to the functional film material with low surface energy obtained by coating some special...
UV Curing Type HDPE Silicone Coated Release Liner For Self-adhesive Products Description: Silicone coated release liner refers to the film with separative film on the surface. Silicone coated on either one side...
High Subsequent Adhesion HDPE Silicone Coated Release Liner Description: Silicone coated release liner refers to the film with separative film on the surface. Silicone coated on either one sided or two sided. T...
Silicone Coated Release Liner For Self-adhesive Waterproof Membranes Description: Silicone coated release liner refers to the film with separative film on the surface. Silicone coated on either one sided or two...
...Release Liner Product Description Black Polyimide Tape with Liner are made from Blcak Polyimide Tape with Release Liner. It has been used in applications at temperatures as low as -73°C(-99°F) and as high as...
...release liner specialty easy to stick on and tear off PET film 1. Product description Release Film Silicone coated film that is coating silicone on plastic film which is good in production, then make the sur...
...Release Liner Description: It is PP release film, as PP film carrier and coated one side or two side solvent silicon, use UV curing type, make it easy to peel off from adhesive products when construction. It...
Barrier Type F901 Silicone Coated Release Liner Description: F901 release film: It is a HDPE release film, used for waterproofing membranes, which has anti-outwearing and non-discoloration to maintain the visco...
...enables to possess release effectiveness. With adoption of special technique, PE release film is embossed with regular corrugated stripes at machine direction. Parameter: Products Name HDPE film Spec. 0.1mm*...
... to reduce the static charge with Release Liner(Antistatic Level: 10^6-10^9). It has been used in applications at temperatures as low as -73°C(-99°F) and as high as 260°C (500°F), won't leave color. ESD Kapt...
.... And it mainly used in the electronics industry, adhesive industry, rubber industry. Application: Electronic tape base film, Electronic tape release film, Electronic tape die cutting release film. 2...
... Non Silicone Release Liner 120g gram weight 1. Product description Non silicone release coating,his coating is also , termed as Abhesive. The coated abhesive , creates a surface that discourages adhesion. T...
...Cross linking is involved. 3. Very low coat weight 4. Should not interfere with the PS Adhesive , or lower the peel adhesion , due to unwanted pick up of the release coating by adhesive 5. Cost effective 6. ...