| Sign In | Join Free | My burrillandco.com |
|
... molded on the core column, with almost no internal air gap, and outstanding sealing performance Simple in structure, small in size and light in weight. 2. Polymer Housed with silicone rubber, explosion-proo...
... impulse voltage and operated over-voltage. 2. Product Highlights of Y5WZ type Surge arrester The ambient air temperatures is no higher than +40℃,no lower than -40℃. The altitude above sea level does not exc...
Glazed Silicone MOA Lightning Surge Arresters for Substation Protection 35KV Introduction: Main features: It adopts double sealing structure, the core encapsulates by molded silicone rubber which completely so...
...lightning surge arrester with N connector for antenna system Technical Specification P1 of TS-G500N lightning surge arrester for antenna system Model TS-G500N Uc 250V IL 3.5A Iimp 1kA In 5kA Imax 10kA Up ≤70...
...lightning surge arrester with N connector for antenna system Technical Specification P1 of TS-G500N lightning surge arrester for antenna system Model TS-G500N Uc 250V IL 3.5A Iimp 1kA In 5kA Imax 10kA Up ≤70...
...Type 2 surge arrester Advantage:Common mode, differential mode full protection Type 2 surge arrester Features: Type 2 surge protectors are designed to be installed at the entrance of the installation, in the...
... from being damaged by lightning impulse voltage and operating over-voltage. Usual Service Condition: Power frequency:48Hz ~60Hz Ambient temperature:-40℃~+40℃ ......
... arrester. • Iimp: 12.5 kA / pole. • Number of poles: 3P+NPE. • Replaceable module. • Visual fault signaling. • Optional remote ......
... design is installed on the 35mm electronic rail. • It protect to indirect and direct lightning effect or other transient overvoltage. • Built-in over-current overheating, temperature-controlled circuit brea...
..., and operational status of lightning arresters. Features • Display lightning arrester discharge count and status of two switch signals online • Microprocessing and digital storage ensure accurate data recor...
Type 1 25kA Lightning Surge Arrester Module surge voltage protector ac SPD surge voltage protector Features: • Working voltage: 220V/255V/275V/320V/385V/420V/440V. • High arresting capacity up to 25 kA (10/350μ...
... of lightning which varies from region to region. Preventive and arrest systems and devices should be in place. • Type 1+2 surge protector for photovoltaic. • Lightning impulse current(10/350us):12.5kA. • Ma...
....1, IEC61643-1 standards • Type 2 Class II surge arrester. • Applicable to lightning strike electromagnetic pulse (LEMP) protection for TN-S power supply line systems. • SPD helps prevent unwanted over-volta...
...Type 3 Surge Protection Device TUV BR275-20 4P 275 V Surge Protective Device Type 3 Lightning Surge Arrester Features: Protecting low-voltage consumers' installations against indirect lightning discharge...
... arresting capacity up to 25 kA (10/350μs) per pole. • Normal discharge current (8/20us) In: 25kA / 50kA. • Max. discharge current (8/20us) Imax: 100kA. • Labeled connections. • Protection class: B. • Compos...
... Lightning current arresting capacity 12.5 kA (10/350us) per pole. • Operating state / fault indication by green / red indicator flag in the inspection ......
4P 20KA 40KA AC Lightning Protection 320V 3phase Lightning Protector Class C Lighting Arrester 4P 20KA 40KA AC Lightning Protection 320V 3phase Lightning Protector Application: • TY-40 4P surge protection devic...