| Sign In | Join Free | My burrillandco.com |
|
...Cable Spark Tester complies with the standard requirement of UL1581-1990. It is indispensable test equipment for testing the quality of insulating layer with high voltage during the productive process of ele...
IEC60558-1 Fig6 Mandrel Tester Device Light Testing Equipment 100N / 150N Product information: This tester conforms to IEC60558-1 Fig6 and IEC60065 Fig14--16. The test shall be performed by fixing the specimens...
Low Temperature Pressure Impact Test Equipment IEC60884 Figure 27 Product information: The specimens are subjected to an impact test by means of an apparatus as shown in figure 27. The apparatus, positioned on ...
...IEC60245.2 clause 22.7. It is used for checking mechanical strength of completed flexible cables. This test does not apply to flexible cables with cores of nominal cross-sectional area greater than 4mm2 and ...
... with the testing probe for the convenience and correctness. In the two output electrodes, the low potential (the red one) is connected with the energized part of the electrical appliance and the high potent...
... 11.101, it is used to examine the temperature rise performance of the rotary joint of the apparatus after a continuous rotating operation. The test device is controlled by Mitsubishi PLC, adopt to 7 inch to...
... called air bomb aging tester, is suitable for the aging test in the oxygen and compressed air to the wire and cable, rubber ( plastic, leather ) insulation and sheathing, as well as other polymer materials ...
... products, and the like), curtain plackets and large tents including awnings and door covers for vertical flame propagation performance of textiles. test. This tester can only be used to assess the...
IEC 60112 Proof and Comparative Tracking Test Equipment for Solid Insulating Materials product introduction The test machine is designed and manufactured according to the requirements of the relevant standards,...
IEC60065:2014 clause 16.5 Cord Anchorage Strain and Twisting Test Equipment Standard: Conforms to IEC60065:2014 clause 16.5, Clause 25.15 of IEC 60335-1 Household and similar electrical appliances – ......
IEC 60529 IP1X Ingress Protection Test Equipment Test Sphere Probe With Force Of 0-50N This probe is intended to verify protection of persons against access to hazardous parts for an IP1 Code. Also used to veri...
... requirements,IEC60245-2 Rubber insulated cables-Rated voltages up to and including 450/750 V-Part 2: Test methods. Standard description: Electrical resistance of conductors In order to check the electrical ...
...Testing Equipment Tensile And Elongation Strength Measuring Device 390mm Application: this device is suitable for all kinds of food packaging, textile, rubber, plastic, synthetic leather, tape, electronics, ...
....2.8, and figure 3, figure 4, figure 5 and figure 6, IPX1, IPX2, IPX3, IPX4, IPX5 IPX6, IPX7 and IPX8, Table 3. Application: It is used to test the degrees of protection against ingress of water indicated by...
IEC 60227-2 Clause 3.3 Cable Testing Equipment Snatch Tester With A 0.5kg Weight IEC60227-2 clause 3.3 Snatch test The requirements are given in 5.6.3.3 of IEC 60227-1. A sample of cord of appropriate length sh...
... Type Electro-Dynamic Vibration Testing Equipment With 2~5000hz Frequency Range Introduction of Electro-Dynamic Shakers: An electro-dynamic shaker, also known as a vibration shaker, is a sophisticated testin...
... equipment, which is mainly used to simulate various extreme high and low temperature environments and conduct reliability tests on products. It is widely used in electronics, electrical appliances, communic...
Product Description: The Cable Testing Equipment is an essential tool for ensuring the quality and reliability of cables used in various applications. This wire testing tester is designed to meet international ...
... of completed flexible cables. This cable tester consists of a carrier C (see IEC60245-2 Figure 1),a driving system for the carrier and four pulleys for each sample of cable to be tested....
... 4.14.3. The adjustment device, equipped with the appropriate cable or cord shall be operated in accordance with following table. A cycle of operation is a movement from one extreme of the range to the other...