| Sign In | Join Free | My burrillandco.com | 
 | 
 
                    ... Harmonics Output In the Power Calibration mode, the GF1012 can be used as a source to calibrate DC and single-phase AC watt meters, power analyzers, and energy meters. In this mode, the output voltage can b...
 
                    ...Current Source 2x8 ch, The input voltage range is 18 to 30 volt dc and the input current source is 6 mA at 24 V. The inputs are divided into two individually isolated groups with eight channels and one volta...
 
                    ... Automation as GE Fanuc automation has been acquired by the former. The IC660BBA026 retained its features, built with Six (6) analog input channels that support current sourcing wiring and comes with resolut...
 
                    ...Current Source 2x8 ch, The input voltage range is 18 to 30 volt dc and the input current source is 6 mA at 24 V. The inputs are divided into two individually isolated groups with eight channels and one volta...
 
                    ...current sourcing outputs Detailed data Isolation Groupwise isolated from ground Current limiting Short circuit proof current limited output Maximum field cable length 600 meters (656 yards) Rated insulation ...
 
                    ... 0.28kg Product Details The 531X207LCSAMG1 board was developed as a local area network (LAN) current source board. The manufacturer, General Electric, designed this card for the 531X replacement series of dr...
 
                    ...Current Source GF302D-200A Automatic Portable Three Phase Watthour Meter Test boards With voltage and current source 7 inch color LCD Automatic Portable Three Phase Watthour Meter Test Equipment with 3 posit...
 
                    Product:General Electric IC660BBA025 24/48 volt DC Current-Source Analog Output Block The GE Intelligent Platforms/ GE Fanuc GE-IP Genius I/O IC660BBA025 is a block 24/48Vdc Analog Current Source with six outpu...
 
                    Integrated Circuits IC Texas Instruments (Electronic Components ) DAC8750IPWP DAC7750 DAC8750 16Bit Single Channel Programmable Current Output DAC for 4-20mA Current-Loop Applications Description for the DAC875...
 
                    GF101 Single Phase Electrical Power Calibrator With 0.05% Voltage & Current Source WITH 0.05 CLASS POWER SOURCE GF101 single phase voltage & current source is suitable for power department, measuring department...
 
                    5V - 240V Magnetic Sensor Reed Switch For Pneumatic Air Cylinder,PNP Current Sourcing And NPN Current Sinking CS series magnetic sensor switch for air pneumatic cylinder and Hydraulic cylinder with magnetic Ree...
 
                    ...CURRENT 16 CH  The input voltage range is 18 to 30 volt dc and the input current source is 6 mA at 24 V. The inputs are divided into two individually isolated groups with eight channels and one voltage supe...
 
                    ...point, such as the linear high-resistance breakdown of the cable middle joint. 2. Flashover type breakdown point. After breakdown, the constant current source can maintain the arc, and there is a stable curr...
 
                    ... and comes in 2 series (A and B.) It has a dual-channel mode that will control any redundancy using 2 output signals. The Allen-Bradley 1734-OB8S Series has Eight (8) Current sourcing outputs per module. The...
 
                    ... adjust output voltage and current. The efficiency can be up to 96%, measured at 20A, converting 24V to 12V. It is designed with 75V/80A large current dual MOS tube. Input and output use high frequency low r...
 
                    Medium Frequency Power SourceSupply Of Hot Induction Elbow Machine Features of the Medium Frequency Power Source Supply Of Hot Induction Elbow Machine: Easy operation: A full time operator specially for power...
 
                    Medium Frequency Power SourceSupply Of Hot Induction Elbow Machine Features of the Medium Frequency Power Source Supply Of Hot Induction Elbow Machine: Easy operation: A full time operator specially for power...
 
                    ...Module IC660BBA026A 24-48V DC Current Source Product Description: GE Fanuc Discrete input module for 90 - 30 series PLC offers 16 input points with one common power input terminal. It requires an AC power so...
 
                    Single Phase Electric Meter Test Bench two current source with ICT class 0.05 KE8103 Single Phase Electric Meter Test Bench KE8103 has two current sources, which make it possible to test two elements simultane...