| Sign In | Join Free | My burrillandco.com |
|
...%C to +380°C Grid size 1x1,2x2.5, 2x4, 4x4, 6x6, 8x8 to 10x 10. Features Dimensional stability,High dielectric strength Material PTFE Standard size 1*1,2*2,4*4mesh,10*10mesh Place of...
... available Made of molding power Temperature : -180--260°c Stretch strength : >15Mpa Break elongation rate :200% Description: Molded PTFE sheet is manufactured by molding process with PTFE granular resin and...
... available Made of molding power Temperature : -180--260°c Stretch strength : >15Mpa Break elongation rate :200% Description: Molded PTFE sheet is manufactured by molding process with PTFE granular resin and...
White Skived PTFE Sheet Soft PTFE Rods Formable Quick Detail: 1. High dielectric properties 2. Non-toxic 3. Superb electrical insulating properties 4. A wide working temperature range from 260C down to liquid ...
Virgin Soft Expanded PTFE Sheet Non-Toxic , PTFE Heat Resistance Quick Detail: 1. High dielectric properties 2. Non-toxic 3. Superb electrical insulating properties 4. A wide working temperature range from 260°...
... available Made of molding power Temperature : -180--260°c Stretch strength : >15Mpa Break elongation rate :200% Description: Molded PTFE sheet is manufactured by molding process with PTFE granular resin and...
... low coefficient of friction 4. Good dielectric strength 5. Limiting Oxygen Index greater than 95 6. ETO and autoclave sterilizable 7. Flat and tidy surface, no defects, crevices and separations 8. ......
... 7.Oil resistance 8.High temperature resistance 9.Low temperature resistance 10.water resistance 11.Electric insulation;good dielectric in mediums. 12.Soft and formable,Outstanding chemical properties etc....
...%C to +380°C Grid size 1x1,2x2.5, 2x4, 4x4, 6x6, 8x8 to 10x 10. Features Dimensional stability,High dielectric strength Material PTFE Standard size 1*1,2*2,4*4mesh,10*10mesh Place of...
... of alumina-nitride-ceramic plate, AIN ceramic tube and other special parts. It has excellent flexural strength, hardness, maximum use temperature and dielectric constant, making it an ideal choice for a var...
... due to its high strength, high hardness, and low thermal expansion coefficient. Si3N4 ceramic ball is the most widely used form of this material. It has a dielectric constant of 9.2-9.6, a thermal expansion...
...e a low Poisson's Ratio of 0.27, high dielectric strength of 18-20 KV/mm, high density of 3.2 G/cm3, high dielectric constant of 9, and a high hardness of 13.9GPA. These advanced technical ceramics are ideal...
...Dielectric Polished Pink 96% Alumina Ceramic Substrate For Electronics The advantages of alumina ceramic substrate: 1. High thermal conductivity, up to 24 W/m.k at 25℃ 2. Good thermal shock resistance, great...
...Dielectric: PTFE Shield: Tin Soaked Copper Jacket: FEP Package: 100M, 200M, 300M, Wooden Spool, Carton 670-086 / 75 Semi Flexible Cable 0.29mm Silver Plated CCS with 1.68mm PTFE Quick Detail: 670-086/75 Semi...
...PTFE Frame Immersion Heater For Ultra-Pure Requirement PFA Wetted Surfaces Fluorine Ground Wire Type J Thermocouple PTFE Frame Immersion Heater For Ultra-Pure Requirement are the perfect solution for heating...
...PTFE Frame Immersion Heater PFA Wetted Surfaces Fluorine Ground Wire Type J Thermocouple PTFE Frame Immersion Heater For Ultra-Pure Requirement are the perfect solution for heating harsh chemicals or DI wate...
...PTFE Frame Immersion Heater With J Type Thermocouple PFA Wetted Surfaces Fluorine Ground Wire Type J Thermocouple PTFE Frame Immersion Heater For Ultra-Pure Requirement are the perfect solution for heating h...
100% Virgin Thickness 1mm ~ 6.5mm White PTFE Skived Sheet Rolls 10M 20M 30M FEATURES Polytetrafluoroethylene sheet by suspension polymerization of PTFE resin molding. It has the best chemical resistance in know...
...PTFE Gasket Sheet Skived Rolls One-Side Etched for stainless Steel DESCRIPTION PTFE has the best chemical resistance of all known plastic.It has the lowest coefficient of friction of all known solid material...