Total 1698 products for ptfe dielectric constant Manufacture & Suppliers

• Rogers RO3035（laminates） PCB 2-layer 20mil with Immersion Silver work for Automotive radar applications

  

  ... a state-of-the-art solution for advanced technologies like 5G, millimeter wave, and massive MiMo applications. These innovative ceramic-filled PTFE composites boast a dielectric constant of 3.5+/- 0.05 at 1...

  Shenzhen Bicheng Electronics Technology Co., Ltd

  Guangdong,China

  Site Member

  Add to cart

  Contact Supplier

• Rogers TMM4 high frequency PCB 2-layer 30mil with Immersion Gold

  

  ... thermoset polymer that combines the advantages of ceramic and traditional PTFE laminates. With a dielectric constant of 4.50+/-0.045 and a dissipation factor of 0.0020 at 10GHz, TMM4 PCBs offer exceptional ...

  Shenzhen Bicheng Electronics Technology Co., Ltd

  Guangdong,China

  Site Member

  Add to cart

  Contact Supplier

• Decoding RO4003C PCBs: Your Key Q&A Guide to High-Frequency Brilliance

  

  ...fusion of PTFE prowess and epoxy/glass convenience in RO4003C PCBs, ensuring unwavering signal integrity with a mere 0.0027 Dissipation Factor at 10GHz. What Distinguishes RO4003C PCBs? RO4003C PCBs flaunt a...

  Shenzhen Bicheng Electronics Technology Co., Ltd

  Guangdong,China

  Site Member

  Add to cart

  Contact Supplier

• RF-10 High Frequency 2-layer PCB substrate could be 10mil,20mil,25mil,60mil,and 125mil Copper Clad Laminates

  

  ...RF-10 copper clad laminates offer a unique combination of ceramic-filled PTFE and woven fiberglass, making them ideal for RF applications requiring high dielectric constant and low dissipation factor. In thi...

  Shenzhen Bicheng Electronics Technology Co., Ltd

  Guangdong,China

  Site Member

  Add to cart

  Contact Supplier

• Rogers RO3006 2-Layer PCB bulit on 10mil Thickness substrates, Immersion Gold Finish, and White Silkscreen

  

  ....) 1. Overview of the 2-Layer PCB Our 2-layer PCB uses Rogers RO3006, a ceramic-filled PTFE composite, as the base material. Known for its stable dielectric constant and low dissipation factor, RO3006 ensure...

  Shenzhen Bicheng Electronics Technology Co., Ltd

  Guangdong,China

  Site Member

  Add to cart

  Contact Supplier

• Rogers RO4350B DK 3.48 the laminates are a proprietary blend of woven glass reinforced hydrocarbon/ceramics

  

  ... performance comparable to PTFE/woven glass and the manufacturability advantages of epoxy/glass. RO4350B materials exhibit precise control over dielectric constant (Dk) while maintaining low loss, using the ...

  Shenzhen Bicheng Electronics Technology Co., Ltd

  Guangdong,China

  Site Member

  Add to cart

  Contact Supplier

• TLX-8 double sided PCB bulit on 10mil substrates with plating ENIG Finish for Microwave Applications

  

  ....) 1. Overview of the 2-Layer PCB This 2-layer PCB uses Taconic TLX-8 laminates, a PTFE fiberglass material renowned for its outstanding thermal resistance, low dissipation factor, and stable dielectric cons...

  Shenzhen Bicheng Electronics Technology Co., Ltd

  Guangdong,China

  Site Member

  Add to cart

  Contact Supplier

• RT/duroid 5870 High Frequency PCB with 5mil (0.127mm), 10mil (0.254mm), 20mil (0.508mm), 31mil (0.787mm), 62mil (1.575mm)

  

  ... laminates are PTFE composites reinforced with glass microfibers, specifically engineered for the precise demands of stripline and microstrip circuit applications. These composites possess exceptional dielec...

  Shenzhen Bicheng Electronics Technology Co., Ltd

  Guangdong,China

  Site Member

  Add to cart

  Contact Supplier

• RO3003 Dk 3.00 High frequency PCB Single Sided, Double Sided, Multi-layer PCB for commercial microwave and RF

  

  .... They provide a competitive solution for commercial microwave and RF applications, where high-frequency performance and consistent electrical characteristics are essential. With its stable dielectric consta...

  Shenzhen Bicheng Electronics Technology Co., Ltd

  Guangdong,China

  Site Member

  Add to cart

  Contact Supplier

• RO3006 DK of 6.15 PCB circuit materials base on 5mil, 10mil, 20mil, 30mil, 60mil

  

  ...tems. These materials are composed of ceramic-filled PTFE composites and are designed to provide outstanding electrical and mechanical stability at competitive prices. The advanced nature of RO3006 circuit m...

  Shenzhen Bicheng Electronics Technology Co., Ltd

  Guangdong,China

  Site Member

  Add to cart

  Contact Supplier

• RF-35TC PCB built on 5mil, 10mil, 20mil, 30mil, 60mil with ENEPIG, Pure gold, OSP is suited for high power applications

  

  ... thermal conductivity. The heat is diffused away from both transmission lines and surface mount components such as capacitors etc. It will not oxidize, yellow or show upward drift in dielectric constant and ...

  Shenzhen Bicheng Electronics Technology Co., Ltd

  Guangdong,China

  Site Member

  Add to cart

  Contact Supplier

• TMM10 RF substrate built for Single Layer, Double Layer, Multilayer, Hybrid PCB

  

  ... stripline and microstrip applications. It combines the advantages of both PTFE and ceramic substrates without being constrained by their mechanical properties and production techniques. Features TMM10 featu...

  Shenzhen Bicheng Electronics Technology Co., Ltd

  Guangdong,China

  Site Member

  Add to cart

  Contact Supplier

• AD250C RF PCB with OSP, ENEPIG, Bare copper, Pure gold Surface using in Automotive telematics antenna

  

  ... of today's wireless antenna markets. These laminates are made from glass-reinforced, PTFE-based materials that offer a controlled dielectric constant, low loss performance, and excellent passive intermo...

  Shenzhen Bicheng Electronics Technology Co., Ltd

  Guangdong,China

  Site Member

  Add to cart

  Contact Supplier

• TMM13i substrate for high-frequency circuit boards | Single Layer,Double Layer, Multi-layer, Hybrid PCB for polarizers

  

  ... reliability in plated thru-hole strip-line and micro-strip applications. It features an isotropic dielectric constant (Dk) and integrates the advantageous properties of both ceramic and PTFE substrates, whi...

  Shenzhen Bicheng Electronics Technology Co., Ltd

  Guangdong,China

  Site Member

  Add to cart

  Contact Supplier

• RF-10 high frequency material PCB 2-Layer Copper Clad Laminate 10mil Core with ENIG Finish using in Microstrip Patch Antennas

  

  ...-10 PCB The 2-layer RF-10 PCB is a high-performance, ceramic-filled PTFE laminate designed for RF and microwave applications requiring high dielectric constant (Dk), low insertion loss, and outstanding dimen...

  Shenzhen Bicheng Electronics Technology Co., Ltd

  Guangdong,China

  Site Member

  Add to cart

  Contact Supplier

• CER-10 is an organic-ceramic laminate from Taconic’s ORCER product family with low moisture absorption of just 0.02%

  

  ... factor of 0.0035 at 10 GHz. It features a woven glass reinforcement, combining Taconic’s advanced ceramic fill technology with coated PTFE fiberglass expertise. Features CER-10 delivers exceptional interlam...

  Shenzhen Bicheng Electronics Technology Co., Ltd

  Guangdong,China

  Site Member

  Add to cart

  Contact Supplier

• TLX-0 DK2.45 Copper-Clad Laminate thickness 0.127 - 6.35mm size upto 36 x 48inch | 914 x 1220mm for RF/Microwave Designs

  

  ... and robust mechanical reliability for high-volume, mission-critical RF and microwave applications. As the member of the versatile TLX family with the lowest dielectric constant and...

  Shenzhen Bicheng Electronics Technology Co., Ltd

  Guangdong,China

  Site Member

  Add to cart

  Contact Supplier

• F4BM275 RF substrate Double-sided copper clad laminate ED copper in weights of 0.5oz 18µm, 1oz 35µm 1.5oz 50µm, 2 oz 70µm

  

  ... balance of electrical, thermal, and mechanical properties, tailored for advanced RF and microwave applications. With a carefully tuned dielectric constant (Dk) of 2.75, it occupies the higher tier of the se...

  Shenzhen Bicheng Electronics Technology Co., Ltd

  Guangdong,China

  Site Member

  Add to cart

  Contact Supplier

• F4BME275 High-Frequency double sided Copper Clad Laminate | raw material | Substarte using for RF microwave PCB

  

  ...a high-performance, glass fiber-reinforced PTFE (Polytetrafluoroethylene) copper clad laminate designed for advanced microwave and RF applications where a moderately higher dielectric constant is required fo...

  Shenzhen Bicheng Electronics Technology Co., Ltd

  Guangdong,China

  Site Member

  Add to cart

  Contact Supplier

• F4BME294 High-Frequency double sided Copper Clad Laminate 0.5mm, 0.762mm, 1.0mm, 1.524mm substrate for RF microwave PCB

  

  ... applications that require a near-unity dielectric constant for optimal circuit miniaturization, combined with low signal loss and superior PIM performance. Part of the premium "E" series from Taiz...

  Shenzhen Bicheng Electronics Technology Co., Ltd

  Guangdong,China

  Site Member

  Add to cart

  Contact Supplier