| Sign In | Join Free | My burrillandco.com |
|
...-M483 LU: 140 MA CPU Frequency: 48 MHz Wakeup From Sleep Mode: 0 µs External Reset Pulse Width: 1µs Pull-Up Resistor: 8.5 KΩ...
...industrial and automotive environments. The device features an integrated ESD protection diode network, an internal pull-up resistor, and an on-chip thermal shutdown protection. The MAX489ESD+T also features...
... and external interrupts - High speed SPI serial interface - 6 I/O ports with programmable pull-up resistors - Operating voltage range of 1.8V to 5.5V Package Includes: - ATTINY25-20SSU 8-bit Microcontroller...
Product Type: 8-Bit Level Shifter Features: - Supports two 8-bit ports, A and B, that operate at different logic levels - Open-drain outputs with internal pull-up resistors - Inputs and outputs are over-voltage...
Product Description: TI TPS22918DBVT Power Management IC Features: - Low Quiescent Current: 5μA - Internal Pull-Down Resistor: 48kΩ - Input Voltage: 2.7V to 5.5V - Output Voltage: 0.6V to 5.5V - Output Current:...
...series of configuration registers. At power-up, the I/Ox pins are configured as 85 kΩ pull-down resistors connected to GND. Specification Of AD5592RBRUZ Part Number AD5592RBRUZ Number of Channels 8 Resolutio...
... of 3V, 3.3V and 5V systems 7 voltage trip points available Active low RESET pin Open drain output Internal pull-up resistor (5 kΩ) for MCP130 Holds RESET for 350 ms (typical) RESET to VCC = 1.0V Accuracy of...
... of 3V, 3.3V and 5V systems • 7 voltage trip points available • Active low RESET pin • Open drain output • Internal pull-up resistor (5 kΩ) for MCP130 • Holds RESET for 350 ms (typical) • RESET to VCC = 1.0V...
.... The MIC5502 and MIC5504 LDOs include an auto-discharge feature on the output that is activated when the enable pin is low. The MIC5503 and MIC5504 have an internal pull-down resistor on...
.... The MIC5502 and MIC5504 LDOs include an auto-discharge feature on the output that is activated when the enable pin is low. The MIC5503 and MIC5504 have an internal pull-down resistor on...
.... The MIC5502 and MIC5504 LDOs include an auto-discharge feature on the output that is activated when the enable pin is low. The MIC5503 and MIC5504 have an internal pull-down resistor on...
.... The MIC5502 and MIC5504 LDOs include an auto-discharge feature on the output that is activated when the enable pin is low. The MIC5503 and MIC5504 have an internal pull-down resistor on the enable...
... 【100W FAST CHARGING】Buit in E-Marker Chip, the durable USB-C to C Cable offers 20V/5A (max). Built-in 56KΩ pull-up resistor, upgraded intelligent chip with multi protections inside. Support Quick Charge wit...
... 5A) Data Transfer Rate High-Speed USB 2.0 (Up to 480Mbps) Safety Core / E-Mark E-Marker 2.0 Smart Chipset + 56KΩ Pull-up Resistors Cable Length 6...
...With anti-voltage fluctuation function • Level Hold, optional High effective or low effective • NMOS output built-in pull-up resistor/CMOS direct output • Support serial and parallel output • External capaci...
...=20mA, Vcc1=5V) • Built-in prescaler with input amplifier (Fmax=1.0GHz) • PLL lock/unlock status display out put (Built-in pull up resistor ) • X’tal 4MHz is used to realize 3 type of tuning steps (Division ...
... Description: Board wiring , VCC, trig ( control side ), echo ( receiving end ), out ( empty legs ), GND Note : TRIP pin is internally pulled 10K resistor , using SCM TRIP IO port pin is...
... 7.5 ns tPD Commercial 12 ns tPD Industrial 133 MHz fCNT 38 Inputs; 210A Inputs have built-in pull-up resistors Peripheral Component Interconnect (PCI) compliant 32 Outputs 64 Flip-flops; 2 clock choices 4 “...
... of 3V, 3.3V and 5V systems • 7 voltage trip points available • Active low RESET pin • Open drain output • Internal pull-up resistor (5 kΩ) for MCP130 • Holds RESET for 350 ms (typical) • RESET to VCC = 1.0V...