| Sign In | Join Free | My burrillandco.com |
|
... chambers Temperature range: 0 ℃~ +150 ℃ Inspection window: explosion proof glass Test Chamber material: 304 stainless steel and Cold Rolled steel sheet Cable ports: one port dia 100mm or two ports of ......
11.6kPa Altitude Simulate Battery Testing Equipment High Low Pressure Test With UN 38.3 1. Product Name: Battery altitude Low Pressure Simulation testing machine 2. Product Model: GX-3020-ZC 3. Test standard: U...
... Explosion Proof Test Chamber For Battery Testing Equipment 1. Product Name:Battery explosion proof tank for the over-charge and forced discharge 2. Product Model:GX-FB-8S 3. Description: The tester is mainl...
...:GX-FB-8S 3. Description: The tester is mainly used for the test of over-charge and over-discharge. Put the sample battery into the tank and connect to the charge and discharge tester to ensure the safety of...
... Touch Screen Altitude Simulate Battery High Low Pressure Testing Equipment with UN 38.3 1. Product Name: Battery altitude Low Pressure Simulation testing machine 2. Product Model: GX-3020-Z 3.Test standard:...
...:The test sample is to be placed on a flat surface.A 15.8mm (5/8 inch) diameter bar is to be placed across the center of the sample. A 9.1kg weight is to be dropped from ......
... on a flat surface.A 15.8mm (5/8 inch) diameter bar is to be placed across the center of the sample. A 9.1 weight is to be dropped from aheight of 610mm onto the sample. 4.Test standard:UN38.3,SJ/T11169—1998...
...: The tester is applicable for the free drop test of battery, mobile phone, Intercom, electronic dictionaries, building intercom, and CD/MD/MP3 and other small consumer electronic products and ......
10N / 20N / 30N Finger Nail Test Equipment IEC 60335 Figure 7 Product information: The test finger nail complies with the IEC 60335 figure 7 standard requirements. It is applicable for the non-removable compone...
Flammability Testing Equipment Foam Horizontal Burning Tester ISO9772-2001 / UL94 Product information: Foam horizontal burning tester conforms to the standard requirements of ISO9772-2001,UL94 and so on. It is ...
...Testing Equipment 1.Product information: Imported with original packaging insulation high temperature resistance armour thermocouple,0.5mm type K, armour heat-resisting1100℃(is superior to the standard 1050℃...
...Waterproof Test Equipment Product information: The smart water supply and control system is designed and manufactured in accordance with the standard requirement of IEC60529 IPX1~IPX6 and related requirement...
...IPX4. It is used for the waterproof test of the electric appliance. Some parts of the enclosure can not be wet by the oscillating tube. Under this circumstance, the handheld spray nozzle is used by manual. T...
...Ingress Protection Test Equipment , Waterproof Tester Product information: The immersion box is designed and manufactured in accordance with the standard requirement of IEC60529 clause IPX7 and IPX8. It is u...
... for the waterproof test of the electric appliance. Some parts of the enclosure can not be wet by the oscillating tube. Under this circumstance, the handheld spray nozzle is used by manual. The difference be...
...Cable Spark Tester complies with the standard requirement of UL1581-1990. It is indispensable test equipment for testing the quality of insulating layer with high voltage during the productive process of ele...
10gf / 25gf / 85gf UL2556 Cable Testing Equipment Wire Insulation Thickness Gauge Product information: This test device is made conforming to the standard requirement of UL2556. It aims to measure the thickness...
IEC60558-1 Fig6 Mandrel Tester Device Light Testing Equipment 100N / 150N Product information: This tester conforms to IEC60558-1 Fig6 and IEC60065 Fig14--16. The test shall be performed by fixing the specimens...
Low Temperature Pressure Impact Test Equipment IEC60884 Figure 27 Product information: The specimens are subjected to an impact test by means of an apparatus as shown in figure 27. The apparatus, positioned on ...
...IEC60245.2 clause 22.7. It is used for checking mechanical strength of completed flexible cables. This test does not apply to flexible cables with cores of nominal cross-sectional area greater than 4mm2 and ...