| Sign In | Join Free | My burrillandco.com |
|
...Test Chamber with Temperature & Humidity Control Complied Standards & Clauses IEC 60068-2-6:1995 Environmental testing for electric and electronic products-Part 2: Test methods Test Fc: Vibration (sinusoidal...
... materials (rubber, plastic, woven, steel materials, ceramics, etc.) It meets with the requirements of GB/T228-2002, Tensile Testing Method of Metal Materials at Room Temperature. It is widely used in aerosp...
...Testing Machine For Composite Materials Brief Introduction This machine is for the stretching, compressing, cutting tests of metal, non-metal and composite materials (rubber, plastic, woven, steel materials...
Portable Plastic Testing Equipment , Digital Coating Thickness Gauge Instroduction: Portable coating thickness gauge, magnetic testing method is used, can quickly, no damage, precision testing magnetic substrat...
...Testing Low Temperature Cooling Chamber Product Description 1. Application The machine is designed according to Charpy notch Impact Test Method for Metal Material, and adopts compressor cooling technology. I...
...Testing Low Temperature Cooling Chamber Product Description 1. Application The machine is designed according to Charpy notch Impact Test Method for Metal Material, and adopts compressor cooling technology. I...
... sample in the small flame horizontal burning performance. Standard: GB/T8332-2008 " foam plastics combustion performance test method, the horizontal burning method ISO9772:2001 Cellular plastics -- Determin...
... and flame propagation rate of exposed surfaces such as walls and ceilings (including solid plastics), at the same time measure smoke density. This test method applies to the exposed surface which includes c...
... transformer insulating oil breakdown voltage test equipment The instrument is designed and made as per the National Standard “Test Methods for Interfacial Tension of Oil against Water by the Ring Method”. I...
... of Engler Viscosity, T0622 Bitumen Engler Viscosity Determination(Engler viscometer method) in national industrial standard JTG E20-2011 Standard Test Methods of Bitumen and Bituminous Mixtures for Highway ...
...smoke density developed according to the technical conditions stipulated in the standard GB/8323.2-2008 and ISO 5659-2 "Test methods for the determination of smoke density using the single chamber metho...
... solid materials, laminates, films and film materials. This machine is designed according to GB/T2406 "Plastic combustion performance test methods - oxygen index method" standard. Compliance with t...
...Determination of Flash and Fire Points - Cleveland Open Cup Method and ASTM D 92 Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester. It is applicable to all petroleum products with f...
...T17144-1997 Standard Test Method for Carbon Residue of Petroleum Products-Micromethod. It is suitable to determine the amount of carbon residue of petroleum products. I. Main technical features 1. This carbo...
...) in the JTG E20-2011 Standard Test Methods for Bitumen and Bituminous Mixtures for Highway Engineering. It is suitable to determine the Saybolt viscosity of bitumen and bituminous mixtures under a constant ...
... in the Industry Standard of People’s Republic of China JTG E20-2011 Specification and Test Methods of Bitumen and Bituminous Mixture for Highway Engineering. It is suitable to determine absolute viscosity o...
... of People’s Republic of China GB/T213-2008 and ASTM D240 Test Method for Calorific Value of coal, GB/T384-1988 Test Method for Calorific Value of Petroleum Products and Calibration Regulation of People’s Re...
... Grease Introduction ASTM D1742 test method covers the determination of the tendency of a lubricating grease to separate oil during storage in both normally filled and partially filled containers. This test ...
...Testing Equipment Application: Used for determine the density of ISO845-1985 under the condition of less than 250 kg/M3 of foam under small sample in the small flame horizontal burning performance. Standard:...
... rate, and predict fertilization outcome. 3.The standardized test method in accordance with WHO technical specifications is adopted, and the accuracy and repeatability of the results are more guaranteed. 4. ...