| Sign In | Join Free | My burrillandco.com |
|
...-density applications. The hot-pluggable transceiver integrates 4 transmitting and 4 receiving channels. These QSFP+ cable assemblies can replace four standard SFP+ cable assemblies. This results in higher p...
... CONSCIOUS - Foaming pumps reduce water usage by up to 45%, using less soap and water • SAVE SOAP, SAVE MONEY - By diluting the soap during filling you save soap while receiving a faster and more thorough cl...
...light at night as these will trick the light into thinking it is still daylight.The amount of light the solar cell receives by day will affects its runtime at night. A bad positioned lamp will reduce the run...
...other sources of light at night as these will trick the light into thinking it is still daylight.The amount of light the solar cell receives by day will affects its runtime at night. A bad positioned lamp wi...
... of light at night as these will trick the light into thinking it is still daylight. The amount of light the solar cell receives by day will affects its runtime at night. A bad positioned lamp will reduce th...
...) are ±15kV ESD-protected, +3.3V, low-power transceivers for RS-485 and RS-422 communications. Each device contains one driver and one receiver. The MAX3483E and MAX3488E feature slew-rate-limited drivers th...
... of the conductor. This has the effect of distributing the current equally among the wire strands, reducing the resistance. Litz wire is used in high Q inductors for radio transmitters and receivers operatin...
... is capable of transmitting and receiving data over a differential or single-ended line. The MAX487ESA+T is designed to meet the requirements of the EIA/TIA-422 Standard and features a low power shutdown mod...
..., parks, etc. are used for receiving and distributing electric energy. They are mainly used for ring network power supply and terminal power supply. In order to reduce the electric field strength, the isolat...
... and line drivers are designed specifically to improve both the performance and density of three-state memory address drivers, clock drivers, and bus-oriented receivers and...
... With 3.3-V to 5-V Supply Range ±16-kV HBM Protection on Bus Pins Reduced Unit Load for Up to 320 Nodes Failsafe Receiver for Open-Circuit, Short-Circuit, and Idle-Bus Conditions Low Power Consumption – Low ...
... Range (–20 V to 25 V) More Than Doubles TIA/EIA 485 Requirement Bus I/O Protection – ±16 kV JEDEC HBM Protection Reduced Unit Load for Up to 256 Nodes Failsafe Receiver for Open-Circuit, Short-Circuit and I...
... With 3.3-V to 5-V Supply Range ±16-kV HBM Protection on Bus Pins Reduced Unit Load for Up to 320 Nodes Failsafe Receiver for Open-Circuit, Short-Circuit, and Idle-Bus Conditions Low Power Consumption – Low ...
...RS-485 and RS-422 communication. Each part contains one driver and one receiver. The MAX3483 and MAX3488 feature slew-rate-limited drivers that minimize EMI and reduce reflections caused by improperly termin...
...) are ±15kV ESD-protected, +3.3V, low-power transceivers for RS-485 and RS-422 communications. Each device contains one driver and one receiver. The MAX3483E and MAX3488E feature slew-rate-limited drivers th...
...RS-485 and RS-422 communication. Each part contains one driver and one receiver. The MAX3483 and MAX3488 feature slew-rate-limited drivers that minimize EMI and reduce reflections caused by improperly termin...
... protected against transients in an automotive environment • Slope control to reduce Radio Frequency Interference (RFI) • Differential receiver with wide common-mode range for high immunity against ElectroMa...
...capability to the CAN controller. Features and benefits Fully compatible with the “ISO 11898-24 V” standard Slope control to reduce Radio Frequency Interference (RFI) Thermally protected Short-circuit proof ...
... ESD-protected, +3.3V, low-power transceivers for RS-485 and RS-422 communications. Each device contains one driver and one receiver. The MAX3483E and MAX3488E feature slew-rate-limited drivers that minimize...
...Receiving table Specifications: No. Item Description 1 Suitable material Strip steel 2 Working speed 12-15m/min not including punching and cutting 3 Main motor power 18.5 kw with cycloidal reducer 4 Hydrauli...