| Sign In | Join Free | My burrillandco.com |
|
... voltage Power dissipation < 4W Operating Case Temperature: 0~70℃ Duplex LC connector Application 1. Switched backplane applications 2. Router/Server...
...: 0~70℃ Duplex LC connector Applications 1. Gigabit Ethernet 2. Fiber Channel 3. Switch to Switch interface 4. Switched backplane applications 5. Router/Server interface 6....
...: 0~70℃ Duplex LC connector Applications 1. Gigabit Ethernet 2. Fiber Channel 3. Switch to Switch interface 4. Switched backplane applications 5. Router/Server interface 6....
... Standard : 0°C to +70°C Extended: -20°C to +85°C Industrial: -40°C to +85°C 2. Applications: Giagbit Ethernet Fiber Channel Switch Infrastructure Router/Server...
... +3.3v Power <1w Operating case temperature Standard : 0°C to +70°C 2. Applications: Giagbit Ethernet Fiber Channel Switch Infrastructure Router/Server interface Other...
English Firmware 1GE EPON GPON ONU Modem Router Splitter FTTH Solution Feature Support port mode of VLAN configuration Support LAN IP and DHCP Server configuration Support Route PPPoE/IPoE/DHCP/Static IP and Br...
...Router Bridge Feature In compliant with ITU-T G.984.x and IEEE802.3ah standard Compatible with popular OLT (HW, ZTE, FiberHome,Vsol...) Support Flow & Storm Control , Loop Detection and Port Forwarding. Supp...
Full-Duplex 16 ports optical fiber ethernet switch for CCTV Information The HD-GSF1DT16 can be joined by Corresponding Fiber with another Fiber Media Converter, Hubs, Switches, Routers, Servers or Fiber NIC etc...
... link lengths over LC duplex SMF fiber. Each SFP transceiver module is individually tested to be used on a series of Arista switches, routers, servers, network interface card (NICs) etc. Featuring low power ...
... via a 2-wire serial interface, as specified in SFF-8472. Each SFP+ transceiver module is individually tested to be used on a series of Cisco switches, routers, servers,...
... This SFP+ transceiver allows you to connect a 50/125 multimode fiber optic cable to a 10 Gbps network router, server or switch. It transmits data up to 300 meters (984 feet) and supports bi-directional Giga...
... via a 2-wire serial interface, as specified in SFF-8472. Each SFP+ transceiver module is individually tested to be used on a series of Cisco switches, routers, servers, network interface card (NICs) etc. Fe...
... via a 2-wire serial interface, as specified in SFF-8472. Each SFP+ transceiver module is individually tested to be used on a series of Cisco switches, routers, servers, network interface card (NICs) etc. Fe...
... via a 2-wire serial interface, as specified in SFF-8472. Each SFP+ transceiver module is individually tested to be used on a series of Cisco switches, routers, servers, network interface card (NICs) etc. Fe...
2*1 Stacked 10/100 Base RJ45 Modular Connector with LED Filter Designed to support such applications as: Switches, Routers, Servers and Hub. Features and Benefits RoHS peak wave solder temperature rating 260°C ...
2*1 Dual Ports Female RJ-45 Connector with Integrated Magnetics Designed to support such applications as: Switches, Routers, Servers and Hub. Features and Benefits: RoHS peak wave solder temperature rating 260°...
.../T4,ATM 155MBit/s,100VG-Any-LAN,CDDI,10Base T(IEEE 802.3),Token Ring(IEEE 802.5)etc. (e.g. Telecom-communication,server, router,computer, and so on)......
TSTLP RJ45 network surge arrester for telecommunication / server / router / computer 16 ports RJ45 Network Surge Arrester Technical Parameter S1 Model TS-16RJ45/5/8 Nominal voltage Un ......
... protector which complies with IEC 61643-21 is applied to Gigabit Ethernet ATM, Voip Networks and computer network equipment ... (e.g. Telecommunication, Server, Routers,Computers...) network equipment from ...
... conforming to IEC 61643-21, GB 18802.21 & YD/T 15420. standards is applied to protect network equipment e.g. Switch, Server, Router, HUB, Computer, Modem etc from interruption...