| Sign In | Join Free | My burrillandco.com |
|
..., it ensures reliable data transmission in industrial automation environments. This cable supports direct connection between GOT HMI and FXCPU or FXCPU communication expansion board, widely used in factory a...
...PPAP No Function Line Transceiver Data Rate 250Kbps Transmitter Communication Type RS-422|RS-485 Receiver Communication Type RS-485|RS-422 Interface Standards RS-485|RS-422 Data Transmission Topology Multipo...
...designed to meet TIA/EIA-422-B, TIA/EIA-485-A, V.11, and X.27 standards. The transceiver complies with the PROFIBUS specification providing +2.1V minimum output level with a ......
...designed to meet TIA/EIA-422-B, TIA/EIA-485-A, V.11, and X.27 standards. The transceiver complies with the PROFIBUS specification providing +2.1V minimum output level with a ......
...-Control Local Area Networks General Description The MAX481, MAX483, MAX485, MAX487–MAX491, and MAX1487 are low-power transceivers for RS-485 and RS- 422 communication. Each part contains one driver and one ...
...transceivers for RS-485 and RS-422 communications in harsh environments. Each driver output and receiver input is protected against ±15kV electro-static discharge (ESD) shocks, without latchup. These parts c...
...Low-Power, Slew-Rate-Limited RS-485/RS-422 Transceivers IC Chip General Description The MAX481, MAX483, MAX485, MAX487–MAX491, and MAX1487 are low-power transceivers for RS-485 and RS- 422 communication. Eac...
...Communication Interface Module The Foxboro FBM224 enables connectivity between Modbus-enabled devices and the Foxboro control system. It acts as an interface for Modbus RTU slave devices — such as PLCs and f...
...Chip Product Description: The MAX3488ESA+T is a low-power, low-voltage transceiver for RS-485 and RS-422 communication. It is designed for two-wire half-duplex communication in noisy environments. It feature...
ALR121 RS-422/RS-485 YOKOGAWA ALR121 RS-422/RS-485 MODULE ALR121-S00 CONTACT: Miya Job Title: Sales Managert Skype: miyazheng520 Email: miya@mvme.......
10Mbps Integrated Circuit Chip MAX3085 CPA RS-485 / RS-422 Transceivers General Description The MAX3080–MAX3089 high-speed transceivers for RS-485/RS-422 communication contain one driver and one receiver. These...
...~115.2Kbps Ø 4. Support TCP, UDP, ARP, ICMP, HTTP and DHCP protocol Ø 5. Support across gateway, router communication Ø 6. Support standard TCP/IP SOCKET Ø 7. Support Virtual serial driver access and auto co...
Half-Duplex RS-485/RS-422 Communication Integrates a single driver and a single receiver to enable bidirectional data transfer over a shared differential bus, eliminating the need for separate ......
...-input line receivers that operate with 3.3-V power supply. Each driver and receiver has separate input and output pins for full-duplex bus communication designs. They are designed for RS-422 and RS-485 data...
...RS-422 Serial Protocol Cable Model USB-RS422-WE-1800-BT USB Connector Type USB 2.0 Type-A Male RS-422 Connection Type Half-stripped wire ends (for custom termination) Cable Length 1.8 meters (1800mm) Wire Ga...
... harness RS-422 serial protocol cable USB-RS422-WE-1800-BT to half-stripped wire Parameter Table Parameter Description Cable Type USB to RS-422 Serial Protocol Cable Model USB-RS422-WE-1800-BT USB Connector ...
...422 Fiber Modem MM 1310nm Duplex 2km GM268MM-T2 Overview Model 268 is a sort of more function and economy RS-485/422 interface optic fiber MODEM. It is the best choice to connect RTU to HOST or SCADA control...