| Sign In | Join Free | My burrillandco.com |
|
...m up to four RTD input devices and provides input data with 16 bits of resolution. No external power supply is required for this module. The excitation current for the RTDs is provided by the module, which a...
...s signal into 4-20mA standard current signal after linear processing. It has configurable measuring ranges and large ambient temperature range. It is installed into the top of the temperature transmitter. On...
... probe and the other side connected to the circuitry. Compact and inexpensive one is available any time. It specially designs for PT100. It inputs various RTD signal and converts this signal into 4-20mA stan...
Multifunctional Handle type thin needle / sharp thermocouple surface probe K Description: 1) Thermocouple (thermocouple) temperature measuring instruments commonly used in temperature measurement devices, which...
High Quality K/j/t/e/r/n K Type Temperature Sensor Thermocouple Description: Type K Tube Skin Disposable Thermocouple temperature measurement instruments commonly used in temperature measurement devices, which ...
...signal conditioner, designed to compensate for ISI signal loss in a transmission channel. The device has a patent-pending design which is agnostic to USB Low Speed (LS) and Full Speed (FS) signals. LS and FS...
Thermal Resistance temperature signal isolation transmitter Features: Small size, low cost, international standards DIN35mm rail mounting three-wire, four-wire Pt100 or (PT1000, PT10, Cu50, Cu100) thermal r...
...module that can be used to measure a variety of analog signals, including 4-20mA, voltage, and RTD signals. The module is isolated, which means that it is protected from electrical noise and transients. It i...
... power supply: 5V/12V/15V/24VDC (± 10%) >> International standard one signal input: 0-100mV/0-75mV/0-24V/0-5V / 0-10V/1-5V, 0-10mA / 0-20mA/4-20mA/0-±5V/0-±10V/0-±100mV/0-±20mA >> Standard one output signal:...
... power supply: 5V/12V/15V/24VDC (± 10%) >> International standard one signal input: 0-100mV/0-75mV/0-24V/0-5V / 0-10V/1-5V, 0-10mA / 0-20mA/4-20mA/0-±5V/0-±10V/0-±100mV/0-±20mA >> Standard one output signal:...
... power supply: 5V/12V/15V/24VDC (± 10%) >> International standard one signal input: 0-100mV/0-75mV/0-24V/0-5V / 0-10V/1-5V, 0-10mA / 0-20mA/4-20mA/0-±5V/0-±10V/0-±100mV/0-±20mA >> Standard one output signal:...
.... RTDs For 3-wire RTDs, a single MTL7755ac barrier is the most economical choice. This is suitable for use with a floating bridge – the two leads from the bridge arms are protected by the barrier with the th...
.... RTDs For 3-wire RTDs, a single MTL7755ac barrier is the most economical choice. This is suitable for use with a floating bridge – the two leads from the bridge arms are protected by the barrier with the th...
... Types High accuracy 0.1% of span Shipping weight : 3 Kg General This plug-in type universal temperature converter converts input signal (thermocouple, RTD or mV signal) into isolated DC voltage signal or DC...
... Types High accuracy 0.1% of span Shipping weight : 3 Kg General This plug-in type universal temperature converter converts input signal (thermocouple, RTD or mV signal) into isolated DC voltage signal or DC...
... resistance is on-the-spot installed temperature transmitter unit in match with industrial thermocouple, thermal resistance among DDZ series of instruments. it transforms signal of...
... resistance is on-the-spot installed temperature transmitter unit in match with industrial thermocouple, thermal resistance among DDZ series of instruments. it transforms signal of...
...%. * Two separate channels; measure, source and view process signals simultaneously * Measure volts, mA, RTDs, thermocouples, frequency, and resistance to test sensors and transmitters * Source/simulate volt...
... in the cold end connecting box of the temperature sensor. The temperature sensor is affected by the temperature to produce a differential voltage signal. This signal is amplified by the amplifier, and then ...
...industries. The configurable transmitter not only transfers converted signals from resistance thermometers (RTD) and thermocouples (TC), it also transfers resistance and voltage signals. The standardized out...