| Sign In | Join Free | My burrillandco.com |
|
11.6kPa Altitude Simulate Battery Testing Equipment High Low Pressure Test With UN 38.3 1. Product Name: Battery altitude Low Pressure Simulation testing machine 2. Product Model: GX-3020-ZC 3. Test standard: U...
... on a flat surface.A 15.8mm (5/8 inch) diameter bar is to be placed across the center of the sample. A 9.1 weight is to be dropped from aheight of 610mm onto the sample. 4.Test standard:UN38.3,SJ/T11169—1998...
..., thermoplastic rubber, wire and cable insulation sheath and other aging cracking test, under static tension or continuous dynamic tensile deformation, or intermittent Dynamic deformation and static tension ...
10N / 20N / 30N Finger Nail Test Equipment IEC 60335 Figure 7 Product information: The test finger nail complies with the IEC 60335 figure 7 standard requirements. It is applicable for the non-removable compone...
Flammability Testing Equipment Foam Horizontal Burning Tester ISO9772-2001 / UL94 Product information: Foam horizontal burning tester conforms to the standard requirements of ISO9772-2001,UL94 and so on. It is ...
...Testing Equipment 1.Product information: Imported with original packaging insulation high temperature resistance armour thermocouple,0.5mm type K, armour heat-resisting1100℃(is superior to the standard 1050℃...
...Waterproof Test Equipment Product information: The smart water supply and control system is designed and manufactured in accordance with the standard requirement of IEC60529 IPX1~IPX6 and related requirement...
...IPX4. It is used for the waterproof test of the electric appliance. Some parts of the enclosure can not be wet by the oscillating tube. Under this circumstance, the handheld spray nozzle is used by manual. T...
...Ingress Protection Test Equipment , Waterproof Tester Product information: The immersion box is designed and manufactured in accordance with the standard requirement of IEC60529 clause IPX7 and IPX8. It is u...
... for the waterproof test of the electric appliance. Some parts of the enclosure can not be wet by the oscillating tube. Under this circumstance, the handheld spray nozzle is used by manual. The difference be...
...Cable Spark Tester complies with the standard requirement of UL1581-1990. It is indispensable test equipment for testing the quality of insulating layer with high voltage during the productive process of ele...
10gf / 25gf / 85gf UL2556 Cable Testing Equipment Wire Insulation Thickness Gauge Product information: This test device is made conforming to the standard requirement of UL2556. It aims to measure the thickness...
IEC60558-1 Fig6 Mandrel Tester Device Light Testing Equipment 100N / 150N Product information: This tester conforms to IEC60558-1 Fig6 and IEC60065 Fig14--16. The test shall be performed by fixing the specimens...
...IEC60245.2 clause 22.7. It is used for checking mechanical strength of completed flexible cables. This test does not apply to flexible cables with cores of nominal cross-sectional area greater than 4mm2 and ...
... with the testing probe for the convenience and correctness. In the two output electrodes, the low potential (the red one) is connected with the energized part of the electrical appliance and the high potent...
High Precision IEC Test Equipment Temperature Rise Tester With Digital Meter Product informaton: This device is in accordance with IEC60884-1 Fig 44 Clause 19 of the temperature rise to design and manufacture, ...
... 11.101, it is used to examine the temperature rise performance of the rotary joint of the apparatus after a continuous rotating operation. The test device is controlled by Mitsubishi PLC, adopt to 7 inch to...
... cooking appliances. Application The device is used to check the power-on and off endurance that the toasters are operated at rated power supply and under normal operation. Test sample Toasters Feature The...