| Sign In | Join Free | My burrillandco.com |
|
... very sturdily constructed with cadmium coated plated for rust protection. It is designed for the reduction of test sample which are too large in volume. It handles any material from size up to 108 mm. Each ...
...Samples Voltage Tester for Corona-Resistant Magnet Wire It can test three samples at the same time. Applying voltage to the three samples at the same time, and it will time them respectively. • Voltage outpu...
.../T1043-93,GB/T1843-1996. 2.Specifications Knife stroke 24mm Knife-entering max speed 4mm/min Sample mode 1...
.... Choose the corresponding steel ball according to related standard requirements, then adjust it to be a certain height, and then make it fall freely to impact the test sample. After that, judge the quality ...
...relative to each other.When the two fixtures are close, the sample bends. During the test, the fixture moves at a uniform speed, and the sample repeatedly bends. Observe the damage of the sample. Product inf...
...samples via a gas radiant plate and calibrate with a heat flow meter. Test sample is placed in a vertical position, near the radiation plate, exposed in a clear area calibrated radiation flux. Close to the p...
... drops of sample into the sample well of the cassette. 3.Read results within 15 minutes. Do not read results after 20 minutes. INTERPRETATION OF RESULTS Negative: Only one pink band appears on test region of...
... cut the sample of given size, and is an ideal auxiliary appliance for departments of production, scientific research and quality supervision and inspection of corrugated boards and cartons. Test Standards B...
... price Professional design One year warranty free 1.Usage Cut the specimen in parallel manner for edge compression test. Sample Paper Cutter For Edge Compression Testing Machine is equipped with carved funct...
... that are not suitable for cutting into 16mm abrasion test samples for the heel and upper surface. Usage Grind and prepare the samples for the face abrasion test. Meet the standards GB/T 9867-2008, ISO 4649:...
...samples via a gas radiant plate and calibrate with a heat flow meter. Test sample is placed in a vertical position, near the radiation plate, exposed in a clear area calibrated radiation flux. Close to the p...
... on a flat surface.A 15.8mm (5/8 inch) diameter bar is to be placed across the center of the sample. A 9.1 weight is to be dropped from aheight of 610mm onto the sample. 4.Test standard:UN38.3,SJ/T11169—1998...
...Testing Equipment 1. Product Name: GX-5066 Battery heavy impact testing equipment 2. Product Description:The test sample is to be placed on a flat surface.A 15.8mm (5/8 inch) diameter bar is to be placed acr...
...:The test sample is to be placed on a flat surface.A 15.8mm (5/8 inch) diameter bar is to be placed across the center of the sample. A 9.1kg weight is to be dropped from aheight of 610± 25mm (24±1 inch) onto...
... of fabrics such as canvas, tarpaulin, tent cloth, rainproof cloth and etc. The sample to be tested is fixed at the clamp, and the sample is subjected to an upward pressure by circuit control. Observe the sa...
... on a flat surface.A 15.8mm (5/8 inch) diameter bar is to be placed across the center of the sample. A 9.1 weight is to be dropped from aheight of 610mm onto the sample. 4.Test standard:UN38.3,SJ/T11169—1998...
... on a flat surface.A 15.8mm (5/8 inch) diameter bar is to be placed across the center of the sample. A 9.1 weight is to be dropped from aheight of 610mm onto the sample. 4.Test standard:UN38.3,SJ/T11169—1998...
...:The test sample is to be placed on a flat surface.A 15.8mm (5/8 inch) diameter bar is to be placed across the center of the sample. A 9.1kg weight is to be dropped from aheight of 610± 25mm (24±1 inch) onto...
... on a flat surface.A 15.8mm (5/8 inch) diameter bar is to be placed across the center of the sample. A 9.1 weight is to be dropped from aheight of 610mm onto the sample. 4.Test standard:UN38.3,SJ/T11169—1998...
...Testing Equipment 1. Product Name: GX-5066 Battery heavy impact testing equipment 2. Product Description:The test sample is to be placed on a flat surface.A 15.8mm (5/8 inch) diameter bar is to be placed acr...