| Sign In | Join Free | My burrillandco.com |
|
...Bus to 1-port RS-232 Converter Introduction CAN232 is an interface converter that implements data exchange between CAN-bus network and RS-232 device. It also supports data exchange between CAN-bus network an...
CAN Bus Serial RS232/RS485 to Fiber Optic Converter Overview LNK-ICF01 Series is an industrial grade CAN Bus/RS-232/RS-485 to fiber optic converter which converts a standard CAN bus/RS-232/RS-485 signal transce...
...Converter Adapter Cable Cooper 500mm Square Port Adapter Wires Product Description: USB uses a four-wire cable, two of which are serial channels used to transfer data, and the other two provide power for dow...
... inputs, one analog output and a serial I2C bus interface. PCF8591 the three address pins A0, A1 and A2 can be used for programming the hardware address, allowing access to eight PCF8591 devices on the same ...
SN65HVD485EDR UART Interface IC Half-Duplex RS-485 Transceiver 1 Features 1/2 Unit Load: up to 64 Nodes on a Bus Bus-Open-Failsafe Receiver Glitch-Free Power-Up and Power-Down Bus Inputs and Outputs Available i...
..., 9 digits Since a DC/DC converter is used, only +5VDC power source is required to operate the module One chip controller offers integral 64×16 bit programmable ......
... Low power dissipation <1.05 W typical Compact RJ-45 connector assembly Access to physical layer IC via 2-wire serial bus 1000BASE-T operation in host systems...
Notebook USB 2.0 naar Mini Sata II 7 + 6 13Pin Adapter Converter Kabel voor Laptop CD/DVD ROM drive Data cord Adapter Description: Easy to use: USB universal serial bus interface, support hot swap, plug and pla...
.../50mA 6 Operating Temperature -40℃~+65℃ Introduction of ZHT0800 ZHT0800 contains a 485 interface, multiple devices can be cascaded through the 485 bus. Each module can set the address, the...
1.25Gb/s 3Km LC BiDi SFP Transceiver Hot Pluggable, Single LC, +3.3V, 1550nm Tx/1310nm Rx, DFB-LD, Single-mode, DDM UT-GE-BX03-L53 Description: UTOPTEKs UT-GE-BX03-L53 Transceivers are a high performance, cost...
... Second Bus interfaces (MSC) for serial port expansion to external power devices. Specification Of SAK-TC265DC-40F200W BC Part Number SAK-TC265DC-40F200W BC EEPROM Size 96K x 8 RAM Size 240K x 8 Voltage - Su...
...serials Product features: 1.Support 2230 to 2242 NVME SSD extension, support also 2230 to 2242 SATA-Bus SSD extension. 2. It can't convert NVME to SATA, also can't convert SATA to NVME. 3. This adapter can e...
...serial transceiver with wakeup and protection features. The LIN bus is a single-wire bidirectional bus typically used for low-speed invehicle networks using data rates from 2.4 kbps to 20 kbps. The LIN proto...
...-low-power, high-performance MCUs. It features a wide range of integrated peripherals, including a 10-bit analog-to-digital converter (ADC), a serial peripheral interface (SPI), a universal serial bus (USB) ...
... Compatible with IEEE802.3u Access to physical layer IC via 2-wire serial bus A 10/ 100BASE-TX/ 100BASE-FX converter Operating case temperature range of -40°C to +85°C (Industrial) Applications This 100Base-...
...-45 connector assembly Ø A 10/100BASE-TX/ 100BASE-FX converter Ø It supports RX_LOS(Loss of Signal) function Ø Access to physical layer IC via 2-wire serial bus Ø Operating case temperature range of 0°C to +...
... of 8-bit digital-toanalog converter (DAC) with output amplifiers. Theoutput amplifier provides high current drive capability.The digital data is input via a serial link bus. Only threecontrol lines are requ...
... (1.05 W typical) Compact RJ-45 connector assembly Compatible with IEEE802.3u Access to physical layer IC via 2-wire serial bus A 10/100BASE-TX/ 100BASE-FX converter Applications This 100Base-TX Copper SFP...