| Sign In | Join Free | My burrillandco.com |
|
1000Base-T Copper Module 10/100/1000Mbps RJ45 SFP Module 1000M UTP Transceiver Technical Parameters Application level Level 2 Bandwidth 2Gbps Packet Forwarding Rate 0.892Mpps ......
1.25G Copper Module Gigabit RJ45 SFP Module 100m 1000Base-Tx UTP RJ45 100m Technical Parameters Model 1G-T-003 Application level Level 2 ......
10 km SFP-10G-LR SFP Transceiver Module , Plug in Cisco 10gb Copper SFP SFP-10G-LR Cisco SFP-10G-LR=Cisco Wan Interface Card The Cisco 10GBASE-LRM Module supports link lengths of 220m on standard ......
...SFP+ Copper Twinax Active DAC cables , SFP+ to SFP+ TWINAX Product Description Fiber optical module accessories DAC 10G SFP+ direct attach copper cable are suitable for very short distances and offer a highl...
...copper SFP fiber to RJ45 Gigabit Ethernet SFP Transceiver Module 1000base-T Copper Small Form Pluggable (SFP) transceivers are based on the SFP Multi Source Agreement (MSA) . They are compatible with the 100...
...MSA) . They are compatible with the 10Gbase-T / 5Gbase-T / 2.5Gbase-T / 1000base-T standards as specified in IEEE Std 802.3 . SFP+-10GBASE-T uses the SFP's RX_LOS(must be pulled up on host) pin for link indi...
... Source Agreement (MSA). They are compatible with the 10Gbase-T / 5Gbase-T / 2.5Gbase-T / 1000base-T standards as specified in IEEE Std 802.3. UT-SFP-10G-T uses the SFP's RX_LOS pin for link indication. If p...
...MSA) . They are compatible with the 10Gbase-T / 5Gbase-T / 2.5Gbase-T / 1000base-T standards as specified in IEEE Std 802.3 . SFP+-10GBASE-T uses the SFP's RX_LOS(must be pulled up on host) pin for link indi...
40G QSFP+ to 4x10G SFP+ Copper Cable DAC 40G-4*10G Copper Pigtail Passive Cable 1m to 7m Description The QSFP+ to 4x SFP+ Passive cable assemblies are high performance,cost effective for SFP+ and QSFP+ equipmen...
...Sfp+ Direct Attach Twinaxial Cable , Sfp Direct Attach Compatible Cables Description SFP+ Copper Twinax cables are suitable for very short distances and offer a highly cost-effective way to connect within ra...
Sfp+ Direct Attach Cable Sfp-10g-C1m 30awg Description SFP+ Copper Twinax cables are suitable for very short distances and offer a highly cost-effective way to connect within racks and across adjacent racks. SF...
....uonel.com 10G SFP+ 10 Gigabit SFP Copper Cable Quick Overview: SFP+ Twinax Cable Assembly is a 10GbE solution which connects 10Gb/s host systems at a much lower cost than optical transceivers. Description: ...
10G BASE-T SFP Copper 80m Transceiver Module Features Low power consumption (1.6W @ 10Gbps 30m,2.0W @ 10Gbps 80m) Supports 10GBase-T ......
10G BASE-T SFP Copper 30m Transceiver Module Features Supports 10GBase-T using 30m Cat 6a/7 cable Supports 5GBase-T using 70m Cat 5e cable Supports 2.5GBase-T using 100m Cat 5e cable Supports 10/100/1000Base-T ...
...SFP, Cage Assembly, Data Rate (Max) 4 Gb/s, External Springs, SFP, 1 x 1, Pin, Heat Sink Height 6.5 mm [.256 in] Part Number: 1367645-6 Connector Type SFP Part Status Active Connector Style Cage with Heat Si...
... Single Mounting Type Through Hole, Right Angle Included Lightpipe NO Data Rate (Max)(Gb/s) 4GB/S Cage Material Copper Alloy PCB Mounting Style Through Hole - Press-Fit PCB Thickness (Recommended) 2.25mm[.08...
...SFP Cage Connector Without LightPipe link-pp Part Number: LP24AC01001 Part Status Active Connector Style Receptacle with Cage, Ganged (2x4) Connector Type SFP Cage Material COPPER ALLOY 30u”MIN NI- PL ATED T...
...SFP 2x4 Cage Connector With Inner LightPipe link-pp Part Number: LP24AC01201 Part Status Active Connector Style Receptacle with Cage, Ganged (2x4) Connector Type SFP Cage Material COPPER ALLOY 30u”MIN NI- PL...
...SFP Cage 2x4 Port Connector With Outer LightPipe link-pp Part Number: LP24AC01301 Part Status Active Connector Style Receptacle with Cage, Ganged (2x4) Connector Type SFP Cage Material COPPER ALLOY 30u”MIN N...