| Sign In | Join Free | My burrillandco.com |
|
275V 1 Single Phase Type 2 White Surge Protective Device TUV Approved BR275-40 1+1 Plastic Single Phase Surge Protection Device Features: - Class II / Type 2 lightning protective device. - Consisting of a base ...
... that provides security protection for all kinds of electronic devices, instruments and communication lines. When the peak current or voltage is suddenly produced in the electrical circuit or the communicati...
Lower Protection Level 30kA Surge Protector For 320V N-PE System OBV-I30 data: Uc(maximum continuous operating voltage) 320V Up(voltage protection level) ≤1.9kv suitable power system 1-N/E, single phase Respons...
...Single Phase Power Surge Protection Device ,15KA Surge Arrestor OBV10-I-15 Surge protectors OBV10-I-15 meet the type 1 requirement class according to IEC 61643-11. These devices protect low-voltage consumer ...
... equipment, instruments and communication lines. When the electrical lines or communication lines due to external interference suddenly produce spikes in current or voltage, surge protectors can be shunted i...
... protection zones. As a series-installed fine arrester at the front end of equipment, it integrates full-mode protection to shield against surges in line-neutral, line-earth, and neutral-earth paths. Equippe...
...surge protective device single phase model 255VAC Surge Arrester Features Large energy absorption ability, low limit voltage Fast response speed (≤25ns) Hot state can replace the module (FD2) Application FD2...
Single Channel Network Surge Protecter Device Guide Rail 1. Support 10/100/1000Mbps Ethernet Device Protection 2. Guide Rail & Desktop Installation 3. POE Surge Protection 4. Industrial Grade Technical Paramete...
...Single Phase 220V Current Lightning Protection Box Quick Detail: Rated Surge Current: 15KA Max Surge Current: 25KA Size(mm): 200×110×40 Weght: 1.2kg Descriptions: We present DFL series surge protector to pre...
... IEC 61643-21; GB 18802.21; YD/T 1542. are installed at LPZ 0A -2 or higher, or directly at the upstream near the protected devices Providing the protection for 2 single wires of unbalanced interfaces for me...
...Surge Arrester for Process Automation Industrial SPD for Field Instruments and Sensors SLP16D surge protective device provides reliable overvoltage and surge protection for industrial signal loops, field ins...
...remote signaling for single-phase power supply networks. Nominal voltage: 120 V AC/DC Specifications Product type Device protection Product family SEC Family IEC power supply system TN-S TT Type DIN rail mod...
...phase power distribution and control system, meets SPD level test, used to suppress transient overvoltage lower than equipment withstand shock overvoltage, discharge discharge Energy to protect system circui...
... voltage Uc(V~): 140/320/440V ·Voitage Protection level Up(V~)kA: ≤0.8/1.4/2.0 ·Normal discharge current (8/20μs): 20kA ·Max discharge current (8/20μs): 40kA ·Response time: ≤25ns ·......
... equipment, AC-DC converters, railway power system and power distribution units ranging from 0.25kV to 765kV systems. These surge arresters demonstrate excellent protection properties. surge arrester is a de...
...Surge Protection Device Surge Protective Device Ac FSP-A series surge protection device (in short SPD,alias:surge suppressor surge arrester) is suitable for TN-S, TN-C-S, TT, IT etc,power supply system of AC...
...Surge Protection Device Quick Detail of Surge Protection Device Manufacturer : MTL Instruments Product no : SLP32D Product type : Surge Protection Device (SPD) SLP Series Cost effective surge protection for ...
Single Phase Relay Protection Tester RSRPD 100h Maximum Measuring Range Product Description The instrument adopts the single chip microcomputer technology, consists of automatic-synchronization digital millisec...