| Sign In | Join Free | My burrillandco.com |
|
...Test Equipment Test Probe B With 12mm Diameter IEC60745-2-5 clause 19.101.2.4 For checking the accessibility of the cutting edge zone at the front of the saw above the guide plate, the rigid test probe ‘b’ o...
...Test Probe D With 1 N Force Scale Display IEC60529 This wire is a test device used to prevent the human body from touching dangerous parts. This tester is also used to check the protection against touch of h...
...±0.2 4 Ф50±0.2 5 80±1 Product information: The test thorn probe is intended to verify the protection against access to glowing heating elements. It complies with IEC61032 figure 16 Test probe 41, IEC60335 st...
...±0.2 4 Ф50±0.2 5 80±1 Product information: The test thorn probe is intended to verify the protection against access to glowing heating elements. It complies with IEC61032 figure 16 Test probe 41, IEC60335 st...
... by many standards such as IEC60529 for IP3 testing, IEC 60335-1, IEC60065 and etc. This test probe C is intended to verify the protection of persons against access to hazardous parts. It is also used to ver...
... by many standards such as IEC60529 for IP4 testing, IEC 60335-1, IEC60065 and etc. This test probe D is intended to verify the protection of persons against access to hazardous parts. It is also used to ver...
...Test Probe 1 Figure 5 Ф50mm For Enclosures Against Ingress Test Product information: This probe conforms to standard requirements of IEC 61032 test probe 1 figure 5, and required by many standards such as IE...
...Test Probe 2 Figure 6 Ф12.5mm For Enclosures Against Ingress Test Product information: This probe conforms to standard requirements of IEC 61032 test probe 2 figure 6, and required by many standards such as ...
...Soil Testing Equipment Description: Pyknometer is a glassware for measuring the specific gravity of liquid and solid powder. Soil Testing Equipment Features: High borosilicate glass, high temperature resista...
...Soil Testing Equipment Description: A vessel for evaporating concentrated solutions. Soil Testing Equipment It can be directly heated on the tripod, or indirectly heated by asbestos mesh, water bath, etc. du...
IEC60335-1 Similar Test Probe B with 50mm Circular Stop Face 1. Introduction Similar test probe B is designed to meet the test requirements of IEC60335-1 clause 20.2, the finger part is same as the test probe B...
...Test Probe EVSE Testing Equipment Equipment Overview This is a precision test finger made in accordance the requirements of IEC 61032 test probe, required by many standard such as IEC 61851-1 clause 8 and 12...
... ) These size test fingers are to test for protection against access to hazardous parts with a human finger and / or arm. These are high precision probes made in exact accordance with IEC 61032, Figures 12 a...
...Test Probe A With Nylon Handle Product Overview: This test probe A conforms to the standard requirements of IEC61032 fig.1, IEC60529 IP1 and IEC60065, etc. This probe is intended to verify the protection of ...
...Probe Experiment Device Used With The Testing Probe Product Information: This anti-shock probe experiment device is designed and manufactured meet the requirements of the standard of IEC60335-1 Clause 8.1.4,...
Length 100mm Diameter 1mm - Test Probe D With 1 N Force Scale Display IEC60529 The 1mm test rod meets IEC61032 figure 4 test probe D and EN Standards including IEC60529 for IP4 and suffix D codes. It is used to...
...-1 Test Probe Kits for Verification to Openings in Enclosures of ME equipment 1. Introduction The test probe kits are meet the requirement of IEC60601-1, includes standard test finger, test pin, straight un...
... pressure δ'3 to the axial effective pressure δ'1 measured under the condition of no lateral deformation of the soil sample. It is an important parameter for studying soil deformation and strength. The GJY K...
..., compression index, rebound index as well as consolidation coefficient of the soil etc. With lever ratio 10:1 an 12:1, the low pressure load for specimen area 30cm2 and 50cm2 will be 12.5kPa to 800kPa/30cm2...
UL Rigidity Test Rod Probe Model TPU4: UL Rigidity Test Rod Probe For testing enclosure rigidity in accordance with clause 8.1 of IEC 1010 and the EN, UL and CSA versions of this Standard. Handle is Delrin, tip...