| Sign In | Join Free | My burrillandco.com |
|
... V and 760V Type 2 Surge Protective Device—Type 2 SPDs are intended for installation on the load side of the service equipment overcurrent device, including SPDs located at the branch panel. Type 2 surge arr...
...SPD Description: • Failure indication and centralized remote signalling alarm dry contacts • BR-40 Series surge protective device( hereinafter referred to as SPD) are suitable for AC 50/60Hz, IT, TT, TN-C, T...
...spd manufactur Type 2 single phase surge protectors Type 2 surge arrester Features: Imax 20kA, 40kA and 80kA Up 1kV, 1.4kV and 1.5kV Uc (a.c/d.c) 75V, 150V, 275V, 380V, 440V, 600 V and 760V BRITEC surge prot...
...Surge Protector 40KA SPD Lightning Protection Device Features: • Fast response time • Pluggable module, consisting of a base and pluggable protection module • Double tripping device, safe and reliable • With...
...Surge Protection Device 25kA AC Power Strip protector Product Description: Protection class: Type 1, Class I Pole number: 1P Max. continuous operating voltage (Uc) (AC): 150V / 275V / 320V / 385V / 440V Nomi...
Surge Protector Features: Endurable, sustains thousands of strikes. Status indication. Uc 150V/275V/320V can be achieved. Protection class: Type 1, Class I. Pole number: 4P Widely suitable for three-phaseTN-S s...
...se units must be installed in parallel on the dc networks to be protected and provide common and different modes protection. It's installed location are recommended at both ends of the dc power supply line (...
...Spd Box Protector Lightning Surge Protectors Product details Name HD-Y3 Cable cross-sectional area 2.5-35mm Maximum operating voltage 385- Lightning protection zone 0-2 Nominal discharge current 60 Maximum d...
...Spd Box Protector Lightning Surge Protectors Product details Name HD-Y3 Cable cross-sectional area 2.5-35mm Maximum operating voltage 385- Lightning protection zone 0-2 Nominal discharge current 60 Maximum d...
...Surge Protection Electrical Surge Protective Device SPD Electrical Surge Protective Device SPD Feature: • It’s designed according to GB18802.1 IEC61643-1. • Britec hold patent for the design. • It adopts 35m...
... with a Voltage Protection Level ≤4.0kV, a Thermoplastic UL94-V0 enclosure material, and an Operating Temperature Range of -40℃ to +85℃. It also features a Cross-section ......
...Consistent pluggability. • Precisely designed, this surge arrester is generally used in electrical industry. • Own developed technology to manufacture MOV. • Application specific design • Thermal disconnect ...
... of LPZ1 or LPZ2 and LPZ3. It's designed according to IEC61643-1,GB18802.1, it adopts 35mm standard rail, there is a failure release mounted on the module of surge protection device, When the...
... varistor and gas discharge tube device. It can be installed in LED lamp or lamppost and connected with LED power driver to provide reliable surge protection. It can effectively prolong the service life of l...
... parts are metal oxide varistor components with high discharge capacity. - 40kA Maximum Discharge Current - Remote signaling contact for control device. - No leakage, no operating currents -...
...SPD Surge Protection Device Voltage Protection Varistors are used to protect a circuit from high voltage surges. When a high voltage surge is applied to a circuit, the outcome is usually catastrophic to the ...
...Surge Protection Device F Connector for SPD Feature: • Easily Replaced Element • Available in 50 Ω technology • Bi-Directional Protection • High Reliability Protection from Excessive Voltages • DC passed • V...
...Surge Diverter Module SPD Features: • Type: T1+T2 Surge protector • Working voltage: 240V/400V. • Response time: ≤100ns • Normal discharge current (8/20us) In: 25kA / 100kA. • Maximum discharge current: 50kA...
..., monitoring, video and other signal equipment. Signal lightning arrester in product design, according to the requirements of IEC61644, is divided into B, C, F. B level (basic protection) basic protection le...
..., monitoring, video and other signal equipment. Signal lightning arrester in product design, according to the requirements of IEC61644, is divided into B, C, F. B level (basic protection) basic protection le...