Total 52546 products for specific gravity test apparatus Manufacture & Suppliers

• IEC 62196 Vehicle Drive Over Testing Apparatus For Charging Plug

  

  ...Testing Apparatus For Charging Plug Product information: The test equipment is used to check whether a plug or vehicle connector shall have adequate resistance to damage from being driven over by a vehicle, ...

  Sinuo Testing Equipment Co. , Limited

  Guangdong,China

  Verified Supplier

  Add to cart

  Contact Supplier

• Clause Y.5 IPX3 To IPX6 Water Spray Test Apparatus IEC 62368-1

  

  ...Test Apparatus Product information: The testing system is required by IEC 62368-1:2018 clause Y.5, etc. It is used to verify the protective performance of the enclosure for electronic and electrical products...

  Sinuo Testing Equipment Co. , Limited

  Guangdong,China

  Verified Supplier

  Add to cart

  Contact Supplier

• IEC60335-2-21 2.5Mpa Constant Pressure Water Supply Test Apparatus

  

  ...Test Device Applied standard and clauses: This hydraulic pressure test apparatus is required by IEC 60335-2-5 cl.22.101,IEC 60335-2-7 cl.22.101 , IEC 60335-2-21/35 22.47 & 22.103 , IEC 60335-2-24 cl.22.7, et...

  Sinuo Testing Equipment Co. , Limited

  Guangdong,China

  Verified Supplier

  Add to cart

  Contact Supplier

• IEC 61851-1 Plugs And Vehicle Connectors Cable Anchorage Pull Force And Torque Test Apparatus

  

  IEC 60309-1 Plugs And Vehicle Connectors Cable Anchorage Pull Force And Torque Test Apparatus Product information: This pull force and torque test equipment is used to test the vehicle plugs, and socket-outlets...

  Sinuo Testing Equipment Co. , Limited

  Guangdong,China

  Verified Supplier

  Add to cart

  Contact Supplier

• IEC 60598-1 Luminaries Adjusting Devices 360° Movement PLC Control Test Apparatus

  

  ...-1, mainly used for the lamps adjustment devices’ torsion, and bending test of the table lamps, floor lamps and the lamps which are for professional use (such as a plotter lamps). To verify adjusting devices...

  Sinuo Testing Equipment Co. , Limited

  Guangdong,China

  Verified Supplier

  Add to cart

  Contact Supplier

• BS EN 12983-1 Pencil Hardness Test Apparatus For Exterior Organic Coatings Test Scratch Resistance

  

  BS EN 12983-1 Pencil Hardness Test Apparatus For Exterior Organic Coatings Test Scratch Resistance Product overview: The equipment is complied with BS EN 12983-1 clause 8.4.2 ,8.4.3 and Appendix K. The device u...

  Sinuo Testing Equipment Co. , Limited

  Guangdong,China

  Verified Supplier

  Add to cart

  Contact Supplier

• VDE 0620-1-2005 Abnormal Heat Of Insulating Sleeves Of Plug Pins Testing Apparatus

  

  ...Testing Apparatus Product information: This device meets the standards of IEC60884-1 clause28.1.2 figure 40. It is applicable to test improper heating resistance and burning resistance of plug pins and plug ...

  Sinuo Testing Equipment Co. , Limited

  Guangdong,China

  Verified Supplier

  Add to cart

  Contact Supplier

• IEC 60335-1 Needle Flame Test Apparatus For Test Flammability And Fire Resistance Of Materials

  

  IEC 60335-1 Needle Flame Test Apparatus For Test Flammability And Fire Resistance Of Materials Product overview: The Needle Flame Tester consists of a ��0.9mm needle-shaped burner that tilts with the angel of 45...

  Sinuo Testing Equipment Co. , Limited

  Guangdong,China

  Verified Supplier

  Add to cart

  Contact Supplier

• Insulation Surface Scratch Resistance Test Apparatus For Test Household Appliances IEC 60335-1

  

  Insulation Surface Scratch Resistance Test Apparatus For Test Household Appliances IEC 60335-1 Product information The device is used to check abrasion strength of printed circuit boards or the insulating acces...

  Sinuo Testing Equipment Co. , Limited

  Guangdong,China

  Verified Supplier

  Add to cart

  Contact Supplier

• Needle Flame Test Apparatus For Testing Insulating Material IEC 60695-11-5

  

  Needle Flame Test Apparatus For Testing Insulating Material As Per IEC 60695-11-5 Product information: The Needle Flame Tester consists of a Ф0.9mm needle-shaped ......

  Sinuo Testing Equipment Co. , Limited

  Guangdong,China

  Verified Supplier

  Add to cart

  Contact Supplier

• IEC 60335-2-17 Clause 15.103 Spillage Test Apparatus For Electric Heating Pads Test

  

  IEC 60335-2-17 Clause 15.103 Spillage Test Apparatus For Electric Heating Pads Test Applicable Standards: GB4706.19-2008, Clause 15.2 and Figure 101 Household and similar electrical appliances – Safety – Partic...

  Sinuo Testing Equipment Co. , Limited

  Guangdong,China

  Verified Supplier

  Add to cart

  Contact Supplier

• Pull Force And Torque Test Apparatus For Vehicle Plugs And Connectors

  

  Pull Force And Torque Test Apparatus For Vehicle Plugs And Connectors Product information: This pull force and torque test equipment is used to test the vehicle plugs, and socket-outlets, connectors to withstan...

  Sinuo Testing Equipment Co. , Limited

  Guangdong,China

  Verified Supplier

  Add to cart

  Contact Supplier

• TZS 683:2022 Clause 10.7 Non-Metallic Handles Thermal Insulation Test Apparatus

  

  ...according to ES 573:2021. Testing Procedure The utensil shall be filled with water at 23°C + 2°C up to 90% of its nominated capacity, and the lid (if provided) placed in position. The water shall be ......

  Sinuo Testing Equipment Co. , Limited

  Guangdong,China

  Verified Supplier

  Add to cart

  Contact Supplier

• UL94 / IEC60695-11-2 Flammability Test Apparatus For Plastic And Other Non - Metallic Material

  

  Horizontal Vertical Flame Chamber Tester With Touch Screen Products information: The series of horizontal-vertical flame test apparatus are designed and manufactured according to the standard and related requir...

  Guangzhou HongCe Equipment Co., Ltd.

  Guangdong,China

  Verified Supplier

  Add to cart

  Contact Supplier

• Horizontal / Vertical Flame Test Apparatus PLC Control 7 Inch Color Touch Screen Operation

  

  IEC60065:2014 clause14.1 Horizontal-vertical Flame Test Apparatus HVF-3 Standard: Conforms to IEC60065:2014 clause 14.1, 20.2.1, 20.2.4, Annex G, UL94,IEC60695-11-2, IEC60695-11-3, ......

  Guangzhou HongCe Equipment Co., Ltd.

  Guangdong,China

  Verified Supplier

  Add to cart

  Contact Supplier

• IEC60065 Figure 8 Steel Ball Impact Test Apparatus Drop Height 0.5-1.5m Adjustable

  

  IEC60065 Figure 8 Steel Ball Impact Test Apparatus, Drop Height 0.5-1.5m Adjustable Moreover, the non-ventilated solid areas of the enclosure that protect HAZARDOUS LIVE parts shall be subjected to a single imp...

  Guangzhou HongCe Equipment Co., Ltd.

  Guangdong,China

  Verified Supplier

  Add to cart

  Contact Supplier

• New Condition Plug Socket Tester Low Temperature Impact Test Apparatus IEC60884-1 Figure 42

  

  ...Test Apparatus 1. Introduction of Low Temperature Impact Test Apparatus: Low temperature impact test apparatus is designed according to IEC60884-1 clause 30.4 figure 27 & figure 42, IEC60811-1-4, VDE0620, GB...

  Pego Electronics (Yi Chun) Company Limited

  Jiangxi,China

  Verified Supplier

  Add to cart

  Contact Supplier

• 13A Plug Socket Outlet Tester Adaptor Stainless Steel BS1363 Test Apparatus / Gauges

  

  ...Test Apparatus and Gauges for 13A Plug Socket-Outlet and Adaptor Standard Number Description Figure number QTY BS1363-1 Test pin BS1363-1:1995 figure 1 1 BS1363-1 Apparatus for mechanical strength test on re...

  Pego Electronics (Yi Chun) Company Limited

  Jiangxi,China

  Verified Supplier

  Add to cart

  Contact Supplier

• 0.7-4.5X Cookware Testing Apparatus For Torque Resistance , VML-CNC

  

  0.7-4.5X Cookware Testing Apparatus For Torque Resistance , VML-CNC DESIGN STANDARD: BS EN12983-1 The Product Description: Graph function key, graph constructive functional key and visual tool functional key is...

  Guangdong Haida Equipment Co., Ltd.

  Guangdong,China

  Verified Supplier

  Add to cart

  Contact Supplier

• 0.7X - 4.5X Cookware Testing Apparatus For Torque Resistance With CNC Driven Motor

  

  Cookware Testing Apparatus For Torque Resistance With CNC Driven Motor DESIGN STANDARD: BS EN12983-1 VML-CNC Characteristics: ��� Modern shape design; ��� Fashionable auto-painting-craftwork; ��� Steady granite base;...

  Guangdong Haida Equipment Co., Ltd.

  Guangdong,China

  Verified Supplier

  Add to cart

  Contact Supplier