| Sign In | Join Free | My burrillandco.com |
|
60KG 50~500mm/min Speed Electronic Peel Test Machine / Tape Peel Strength Tester 50HZ Uses: 60KG Electronic Peel Adhesion Test Equipment / Tape Peel Strength Tester 50HZ is designed for quick and reliable tensi...
.../min Speed Floor Type Tensile Strength Testing Machine Leather with Single Column Standard GB/T16491,GB/T1040,GB/T8804.1,GB/T8804.2,GB/T1041,GB/T9341,GB/T8808,GB/T18477,GB/T583,GB13022 GB8804.2-88 and ect. U...
...Testing Machine With 0.5 To 500mm / Min Speed Meet The Standard: 1. GB/T4689.20-1996 measuring fastness of leather’s adhesion 2. QB/T2710-2005 measuring leather’s expansion and the rate of elongation 3. QB/T...
...Testing Instrument With 0.5~500mm/min Speed Meet The Standard: 1. GB/T4689.20-1996 measuring fastness of leather’s adhesion 2. QB/T2710-2005 measuring leather’s expansion and the rate of elongation 3. QB/T27...
...Testing Instrument With 0.5~500mm/min Speed Meet The Standard: 1. GB/T4689.20-1996 measuring fastness of leather’s adhesion 2. QB/T2710-2005 measuring leather’s expansion and the rate of elongation 3. QB/T27...
..., elastomers, textiles, paper, board and finished products. 1.Product Description A. Using the computer as the main control machine plus the special testing software of our...
This machine is applicable to PSTC, ASTM, TLMI, FINAT and AFERA standards, and can be used for both 90° and 180° applications. It is the most convenient universal tensile machine. This instrument is an improved...
...Testing Machine with Touch Screen Controller Brief Introduction: Insertion and Extraction Force Testing Machine is suitable for a variety of connector plug-in test, using embedded microcomputer monitoring te...
... materials, the melt flow rate (MFR) or the melt volume flow rate (MVR) to be determined. It's is a high precise melt testing instruments for the measurement of melt flow rate (MFR)/(MI)...
... used for detection of all kinds of electric wire electric cable bare copper, broken skin, pinhole, etc insulation fault point. Test voltage:0-15KV Test speed:100-360m/min Test cable number: within 3...
...Test Device Product Info: Meet standards of GB/7000.1-2002 Chapter 4.14. And EN60598-1:2000 Function: Applied to testing adjustment device with soft cable and wire built in to check if its shares of conducto...
...Test Device Meet standards of GB/7000.1-2002 Chapter 4.14. And EN60598-1:2000 Function: Applied to testing adjustment device with soft cable and wire built in to check if its shares of conductor breakdown is...
... introduction: Hysteresis Dynamometers (HD Series) are versatile and ideal for low to medium power tests. Hysteresis brakes do not rely on speed to generate torque, so full-scale testing from no load to stal...
...Testing With Water Filtration Unit Product information: This test device is to verify Protection against Vertically Falling Water Drops. It is designed and manufactured in accordance with the standard requir...
...testing machine Component hail impact testing machine Applicable standards: IEC61215, IEC61646, UL1703 standard requirements Purpose: verify component hail impact resistance ability, make artificially hockey...
...test of blankets 1. Introduction The blankets mechanical strength test apparatus is designed according to IEC60335-2-17 clause 21.102 and Annex BB.1 to BB.3. It’s used for mechanical strength test by simulat...
...test of blankets 1. Introduction The blankets mechanical strength test apparatus is designed according to IEC60335-2-17 clause 21.102 and Annex BB.1 to BB.3. It’s used for mechanical strength test by simulat...
Product Description: Flour Test Instrument Hammer Type Cyclone Mill , with a motor power of 750W, is designed for wheat grain and has a net weight of 51kg. With a size of 530*530*650mm, it can work in a humidit...
...speed of stamping feeder, NC servo feeder, air feeder, high speed roller feeder (MAC3-400) http://www.ruihui.net With the rapid development of the stamping industry, the requirements for speed and precision ...
...and the high-speed punch must match a set of molds (divided into upper and lower molds). The high speed press places the material between the two to achieve the desired shape and precision. Therefore, the hi...