| Sign In | Join Free | My burrillandco.com |
|
Steel Test Pin with Nylon Handle as Per BS1363-1 Figure 1 1. Introduction The test pin meets the requirements of BS1363-1 clause 12.6.1 and figure 1.The test pin meets the requirements of BS1363-1 clause 12.6.1...
Nonin 8500,8600,8700,8800,2500 Reusable Adult Medaplast Disposable Spo2 Sensor Manufacturer Model CAS Med OscilloMate 9002, OscilloMate 9302S, OscilloMate 9303 Healthdyne 930, 9705, 970S, 970SE Nonin 2120, 2500...
...Probe 11, GB8898, IEC60065, IEC60598, GB7000, IEC60335, GB4706 and other standard requirements. It can also be used to test the mechanical strength of the holes in the housing or the internal baffle of the h...
AS/NZS/EN/IEC 61010, IEC/EN/UL/AS/NZS 60950, IRAM 2092 Test Probes Finger Purpose: This probe may be used to verify the protection of persons against access to hazardous parts and to verify the mechanical stren...
Reusable Ohmeda Tuffsat OXY-OL3 Adapter cable 1. Product Description : OXY-OL3 spo2 extension cable for Ohemda patient monitor 2. Specifications: Technical Parameter Connector type for machine end Hyp7 pin Conn...
Waveform PI finger probe pulse oximeter Introduction When measuring blood oxygen, the difference between reduced hemoglobin and oxygenated hemoglobin is the most basic data for measuring blood oxygen saturation...
...Probe 11, GB8898, IEC60065, IEC60598, GB7000, IEC60335, GB4706 and other standard requirements. It can also be used to test the mechanical strength of the holes in the housing or the internal baffle of the h...
GE Datex-Ohmeda CARESCAPE ONE TruSignal SpO2 FingerTip Sensor Reusable 9 pin Adult 1m TS-SA-D Brief Introduction GE Ohmeda SpO2 for TruSignal sensors only: GE pulse oximeter sensors contain LEDs that emit red...
Rigid Finger Probe HT-I07 Standard:IEC61032 figure 7 device 11,IEC60884,IEC60598,IEC60335,IEC60065. Application:It is used to verify the protection of persons against access to hazardous parts, and to verify th...
Test Plug For Mechanical Tests On Antenna Coaxial Sockets Product information: This test plug conforms to IEC60065 Figure 8 standard requirement. It is used to test the antenna coaxial socket which is installed...
Product Details Product information: The stirrer shall incorporate a biased-off switch that is recessed or guarded to prevent accidental operation. It conforms to the IEC60335-2-14 requirement. Appliance is che...
Test Plug For Mechanical Tests On Antenna Coaxial Sockets Product information: This test plug conforms to IEC60065 Figure 8 standard requirement. It is used to test the antenna coaxial socket which is installed...
Wedge Probe For Document Shredder The wedge probe is one of two new accessibility probes required by UL 60950 for paper shredders. UL found that children and small women could touch hazardous parts of some shre...
EN 50636-2-100 Figure 2 Adult Arm Probe EN 13683-2003 Figure 5 Product information: The adult arm probe conforms to EN 50636-2-100 figure 2 and EN13683-2003: 5.2.1.3 fig 5. It is used to simulate the adult to t...
Run Well PHiliphhilip M1133A NICU PICU SpO2 Sensor 20set box Medical Device Hospital Equipment Brief Introduction NICU PICU SpO2 Sensor of M1133A for PHiliphhilip Medical Hospital Equipment in good condition...
Telecom Test Probe Usage: Check access to telecommunications voltages. The Telecom Access Probe is required in IEC 60950, IEC 60065, UL and CSA Standards. It is used to check limited access to telecommunication...
UL Enamel Wire Probe 25 Usage: This probe is use to checking access to enamel coated wire accord to UL standard requirement. stainless steel with stainless stell handle....
IP Testing Equipment Test Probe A for IP1X Testing According to IEC60529 Introduction of Test Probe A for IP1X Testing: The test probe A is designed according to IEC61032 fig.1, and meet the requirements of IEC...
Rigid Finger 1 Ø50mm, 20mm wide, 100mm long...