Total 7676 products for spring testing apparatus Manufacture & Suppliers

• Vertical Electrical Safety Test Equipment , Textiles Flammability Test Apparatus

  

  JIS1091-1992 Textiles Vertical Flammability Test Apparatus with 11mm Igniter 1. Introduction FZP-2 Textiles vertical flammability test apparatus is applied to test the burning behaviour of woven fabric, knitted...

  Pego Electronics (Yi Chun) Company Limited

  Jiangxi,China

  Verified Supplier

  Add to cart

  Contact Supplier

• Ball Pressure Test Apparatus Environment Test Equipment Industry Oven From RT To 300℃ Equip

  

  ...Test Apparatus 1. Introduction Oven is widely applied to the fields of motor, glass, ceramic, PC board, coating and etc. for the purpose of drying, preheat and finalize the design. The oven is consisted by w...

  Pego Electronics (Yi Chun) Company Limited

  Jiangxi,China

  Verified Supplier

  Add to cart

  Contact Supplier

• IEC60884-1 Table 18 Electrical Safety Test Equipment Power Cord Anchorage Torque Test Apparatus

  

  ... clause 23.2 table 18. It’s used to test the power cords and cables for household appliances. Parameters: 1. Torque disk diameter: 100mm 2. Weight: equipped with 2N, 3N 5N, ......

  Pego Electronics (Yi Chun) Company Limited

  Jiangxi,China

  Verified Supplier

  Add to cart

  Contact Supplier

• Pendulum Vertical Impact Test Apparatus 2 In 1 AC220V/50Hz IEC62262 IK07 To IK10

  

  ...Pendulum and Vertical Impact Test Apparatus (2 in 1) 1. Standard Conforms to IEC60068-2-75, IEC62262, IEC60598, EN50102 2. Introduction The IK mechanical impact test apparatus is designed according to IEC600...

  Pego Electronics (Yi Chun) Company Limited

  Jiangxi,China

  Verified Supplier

  Add to cart

  Contact Supplier

• Cold Bend Test Apparatus SUS304 Electrical Safety Test Equipment

  

  ... Test Apparatus IEC60811-1-4 for Cable Made by SUS304 Stainless Steel 1. Introduction The cold bend test apparatus is designed according to IEC60811-1-4 clause 8.1 and figure 1, IEC60884-1, VDE0472, GB2951.4...

  Pego Electronics (Yi Chun) Company Limited

  Jiangxi,China

  Verified Supplier

  Add to cart

  Contact Supplier

• Button Control Vacuum Cleaner Test Apparatus DIS644 IEC60335-2-24 For Current Carry Hose

  

  ...Test Apparatus for Testing the Abrasion Resistance of Current-Carry Hose 1. Standards compliant: IEC60335-2-2 clause 21.102 figure 101 and IEC60335-2-24 2. Application: for testing the abrasion resistance of...

  Pego Electronics (Yi Chun) Company Limited

  Jiangxi,China

  Verified Supplier

  Add to cart

  Contact Supplier

• 220V Vacuum Cleaner Test Apparatus 10r/ Min IEC60335-2-24 For Flexing Resistance

  

  ....103 and figure 102 2. Application: for testing the resistance to flexing of current-carry hose of vacuum cleaner 3. Introduction Curreny-carrying hose flexing resistance test apparatus is designed according...

  Pego Electronics (Yi Chun) Company Limited

  Jiangxi,China

  Verified Supplier

  Add to cart

  Contact Supplier

• Connectors 30ML Spillage Test Apparatus IEC60335-2-15 With Spillage Prtoection

  

  ... with spillage protection to ensure that the connectors are not affected by liquids when installed in a rated voltage base according to the manufacturer’s installation instructions. the spillage test is...

  Pego Electronics (Yi Chun) Company Limited

  Jiangxi,China

  Verified Supplier

  Add to cart

  Contact Supplier

• Figure 101 Splash Test Apparatus IEC60335-2-75 0.4Mpa For Cookware Oven

  

  ..., IEC60335-2-64 clause 15.1.1 and 15.1.2, GB4706.38 and GB4706.52. It’s used for the splash test of the appliance of the professional type classified IPX1, IPX2, IPX3 and IPX4. The whole device is made of al...

  Pego Electronics (Yi Chun) Company Limited

  Jiangxi,China

  Verified Supplier

  Add to cart

  Contact Supplier

• ASTM B117 ASTM B117 Environmental Test Chambers Salt Spray Corrosion Test Apparatus

  

  ...Apparatus Fog Salt Mist Spray Chamber Salt Spray Corrosion Test Apparatus Application: The salt spray test machine is used for the surface treatment of various materials, including coatings, electroplating, ...

  BOTO GROUP LTD

  Shanghai,China

  Verified Supplier

  Add to cart

  Contact Supplier

• Ground Recessed Luminaires Torque Load Test Apparatus IEC60598-2-13 Figure 13.6.2.1

  

  ...Test Apparatus 1. Introduction The ground recessed luminaires torque load test apparatus is designed according to IEC60598-2-13 figure 13.6.2.1 “torque test”. Parts of luminaire that may be subjected to rota...

  Pego Electronics (Yi Chun) Company Limited

  Jiangxi,China

  Verified Supplier

  Add to cart

  Contact Supplier

• Manual 300N Compression Test Apparatus Plug Socket Test Equipment

  

  ... socket-outlet is then pressed between two flat surfaces with a force of 150 N for 5 min, as shown in figure 8. The specimen is checked 15 min after removal from the test apparatus, and shall not show...

  HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD

  Guangdong,China

  Verified Supplier

  Add to cart

  Contact Supplier

• 2J to 50J Pendulum Hammer Mechanical Impact Test Apparatus IEC62262

  

  ...Mechanical Impact Test Apparatus IEC62262 1. Introduction The pendulum hammer mechanical impact test apparatus can meet the test requirements of IEC60068-2-75 and IEC62262. The equipment consists of striking...

  Pego Electronics (Yi Chun) Company Limited

  Jiangxi,China

  Verified Supplier

  Add to cart

  Contact Supplier

• Lateral Pull Test Apparatus for Testing Appliance Couplers as per IEC60320-1

  

  Appliance Couplers Lateral Pull Test Apparatus 1. Introduction The appliance couplers lateral pull test apparatus is designed to meet the test requirements of IEC60320-1 clause 23.3 and figure 8 to verify if th...

  Pego Electronics (Yi Chun) Company Limited

  Jiangxi,China

  Verified Supplier

  Add to cart

  Contact Supplier

• Cable Static Flexibility Test Apparatus IEC60227-2

  

  Cable Static Flexibility Test Apparatus IEC60227-2 1. Introduction The static flexibility test apparatus is designed to meet the test requirements of IEC60227-2 clause 3.5 and GB/T5023.2 clause 3.5 for testing ...

  Pego Electronics (Yi Chun) Company Limited

  Jiangxi,China

  Verified Supplier

  Add to cart

  Contact Supplier

• PLC Control IEC60112 Standard Tracking Index Test Apparatus with 220V/50Hz Power and 12 Months Warranty

  

  ...-1 clause 8.9.1.7, IEC60335-1 clause 29, IEC61010-1 clause 6.7.1.3, IEC60884-1 clause 28.2, and BS1363-1 clause 8.2 Appendix C. It is widely used in material testing on lamps, household appliances, IT/AV app...

  Pego Electronics (Yi Chun) Company Limited

  Jiangxi,China

  Verified Supplier

  Add to cart

  Contact Supplier

• IEC60320-1 Compliant Lateral Pull Test Apparatus with PLC+5 Inch Touch Screen Control for 6N/35N/50N Pull Force Testing

  

  Appliance Couplers Lateral Pull Test Apparatus 1. Introduction The appliance couplers lateral pull test apparatus is designed to meet the test requirements of IEC60320-1 clause 23.3 and figure 8 to verify if th...

  Pego Electronics (Yi Chun) Company Limited

  Jiangxi,China

  Verified Supplier

  Add to cart

  Contact Supplier

• Vertical Burning Test Apparatus with 1100° Temperature Resistance and 9mm Copper Block for IEC 60332 Compliance

  

  Vertical Burning Test Apparatus for Single Wire & Cable | Flammability Testing Equipment for IEC & UL Compliance Product introduction: Vertical Burning Test Apparatus is a professional flammability testing solu...

  HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD

  Guangdong,China

  Verified Supplier

  Add to cart

  Contact Supplier

• IEC60227-2 Compliant Cable Static Flexibility Test Apparatus with 220V 50/60Hz Input and ≤1.0m Horizontal Moveable Distance

  

  .../T5023.2 clause 3.5 for testing the flexibility of cables with conductor cross-sectional areas ≥2.5mm2. 2. Specification Working Power AC220V, 50Hz/60Hz Control units ......

  Pego Electronics (Yi Chun) Company Limited

  Jiangxi,China

  Verified Supplier

  Add to cart

  Contact Supplier

• IEC60335-2-2 Compliant Crushing Test Apparatus with 1.5KN Max Crushing Pressure and 50mm/min Pressurization Speed for Current-Carrying Hose

  

  Crushing Test Apparatus for Testing the Mechanical Strength of Current-Carrying Hose as Per IEC60335-2-2 Introduction The current-carrying hose test apparatus is designed to meet the test requirements of IEC603...

  Pego Electronics (Yi Chun) Company Limited

  Jiangxi,China

  Verified Supplier

  Add to cart

  Contact Supplier