| Sign In | Join Free | My burrillandco.com |
|
...Test Apparatus Catalogs for EN 373&348&6942&367&702.pdf Introduction A new term heat transfer index (HTI) has been introduced to avoid confusion with the thermal protective index (TPI) or other terms used in...
... 62196-1:2014 clause 17.2. It is used to check the maximum force required when the test plug is withdrawn from the socket-outlet or vehicle connector and the minimum force required when the single-stage pin ...
Drop Testing Machine 220V 120V Remote Controller Tumble Drop Impact Test Apparatus with 2 Steel Tumbler Model: BD1050 Application: Rolling drop impact tester is suitable for continuous rotation drop test of sma...
...Testing Apparatus For Charging Plug Product information: The test equipment is used to check whether a plug or vehicle connector shall have adequate resistance to damage from being driven over by a vehicle, ...
...Test Apparatus Product information: The testing system is required by IEC 62368-1:2018 clause Y.5, etc. It is used to verify the protective performance of the enclosure for electronic and electrical products...
...Test Device Applied standard and clauses: This hydraulic pressure test apparatus is required by IEC 60335-2-5 cl.22.101,IEC 60335-2-7 cl.22.101 , IEC 60335-2-21/35 22.47 & 22.103 , IEC 60335-2-24 cl.22.7, et...
...consumers or from consumers. Tests for the flammability of textiles used in the manufacture of garments, the introduction of three types of flammability, the determination of the classification of textiles, ...
Performance Characteristics 1.Executive standard: GB/T4074.3-2008,IEC60851-3; 2.This bending test apparatus is applicable to the bending test of various enameled flat wires, paper wrapped flat wires, glass fibe...
IEC 60309-1 Plugs And Vehicle Connectors Cable Anchorage Pull Force And Torque Test Apparatus Product information: This pull force and torque test equipment is used to test the vehicle plugs, and socket-outlets...
...-1, mainly used for the lamps adjustment devices’ torsion, and bending test of the table lamps, floor lamps and the lamps which are for professional use (such as a plotter lamps). To verify adjusting devices...
Pull Out Test Apparatus Portable Concrete Testing Equipment Features: 1.3KG oil cylinder and manual pump below 3kg. 2. LCD lighting function; 2200 data records; 10 ......
... small displacement of concrete specimen (under compression or tension), so as to obtain some indicators of mechanical properties of the specimen. Concrete Testing Equipment Feature: The design is light and ...
...: 16.5, IEC60598: 5.2.11 and other standard provisions. It is used to evaluate power cords, and it is intended to be permanently connected with flexible cords. Perform two tests of tension and torque at the ...
BS EN 12983-1 Pencil Hardness Test Apparatus For Exterior Organic Coatings Test Scratch Resistance Product overview: The equipment is complied with BS EN 12983-1 clause 8.4.2 ,8.4.3 and Appendix K. The device u...
...Testing Apparatus Product information: This device meets the standards of IEC60884-1 clause28.1.2 figure 40. It is applicable to test improper heating resistance and burning resistance of plug pins and plug ...
IEC 60335-1 Needle Flame Test Apparatus For Test Flammability And Fire Resistance Of Materials Product overview: The Needle Flame Tester consists of a 0.9mm needle-shaped burner that tilts with the angel of 45...
Insulation Surface Scratch Resistance Test Apparatus For Test Household Appliances IEC 60335-1 Product information The device is used to check abrasion strength of printed circuit boards or the insulating acces...
Summary This instrument is primarily used to test the rust prevention performance of brake fluid. The principle involves placing the brake fluid into the device, setting the temperature to 35C, and maintaining...
Iso 5660 Cone Calorimeter Test Apparatus, Fire Resistance Testing Equipment Introduction: Cone calorimeter is a new generation of polymer material combustion performance tester based on the principle of oxygen ...
Needle Flame Test Apparatus For Testing Insulating Material As Per IEC 60695-11-5 Product information: The Needle Flame Tester consists of a Ф0.9mm needle-shaped ......