| Sign In | Join Free | My burrillandco.com |
|
... combustion test standard. It is applicable to the VW-1 of UL1581, UL13, UL444 and UL1655 and the FT-1 and FT-2 test standards of CSA. It is economical and widely used by a large number of wire and cable ind...
...standards: Complies with the test standards of GB8625 and DIN4102 "Test Method for Flame Retardancy of Building Materials". Scope of application: It is mainly applicable to determining whether buil...
.../750 V-Part 1: General requirements clause 5.6.3.1, IEC60245-2 Rubber insulated cables-Rated voltages up to and including 450/750 V-Part 2: Test methods clause 3.1 Figure 1, IEC60065-1 clause 16.3 b) Standar...
...standards GB/T3536-2008 Test Method for Flash Point and Fire Point of Petroleum Products - Cleveland Open Cup Method, ASTM D92 and ISO 2592. It is applies to determine the flash point and fire point of petro...
...Testing Machine Textile Abrasion Tester Textile Testing Machine JIS L1018 ASTM D3885 D3886 Textile Wear Resistance Testing Machine Textile Abrasion Tester Strengths This machine is a testing machine as speci...
... provisions", JC/T1005-2006 "cement black raw material calorific value determination method", GB/T384 "petroleum products calorific value determination method". Scope of application: Calorimeter is mainly us...
...electronic products-Temperature testing equipment IEC60068-2-1:2007 (GB/T2423.1-2008) Environmental testing - Part 2: Test methods - Tests A: Cold IEC60068-2-2:2007 (GB/T2423.2-2008) Environmental testing fo...
...electronic products-Temperature testing equipment IEC60068-2-1:2007 (GB/T2423.1-2008) Environmental testing - Part 2: Test methods - Tests A: Cold IEC60068-2-2:2007 (GB/T2423.2-2008) Environmental testing fo...
..., coated fabrics and textiles used in footwear uppers. TEST PRINCIPLE The machine according to test standards : test method is one side face of the sample as the inner surface and the other side face as the ...
...Test Chamber Water Spray Booth for Bus Passenger Car Complied Standards & Clauses QC/T 476-2007 "Limits and test methods for rainproof sealing of passenger cars"; GB 29753-2013 "Safety requirements and test ...
.... In particular(the liquid absorbency time; the liquid absorptive capacity; the liquid wicking rate) Standard ISO 9073-6:2000 Textiles - Test methods for non-woven Part 6: Absorption Standard parameters Tech...
.... Salt spray test is an accelerated corrosion test that produces a corrosive attack to the coated samples in order to predict its suitability in use as a protective finish. The appearance of corrosion produc...
...Test Equipment , Environmental Testing Chamber Description This machine has a standardized test method to check corrosion resistence of coated samples. Salt spray test is an accelerated corrosion test that p...
.... Salt spray test is an accelerated corrosion test that produces a corrosive attack to the coated samples in order to predict its suitability in use as a protective finish. The appearance of corrosion produc...
...Testing Equipment , Battery Pack System Short Circuit Protection Testing Machine Product description: According to the latest national standard GB / T 31467.3-2015 "lithium-ion battery packs and systems for ...
... shaft torsion testing machine Torsion speed 1-720°/min Mechanical Strength Test Applicable standards: GB/T 10128-1998 "Metal torsion test method at room temperature" GB/T 10128-2007 "Metal to...
...Testing Equipment , Battery Pack System Short Circuit Protection Testing Machine Product description: According to the latest national standard GB / T 31467.3-2015 "lithium-ion battery packs and systems for ...
...Test Equipment Automotive Wiring Mark Durability Testing Machine This specialized testing equipment evaluates the durability of printed characters on automotive wiring, ensuring compliance with ISO 19642 sta...
....4 low temperature MIL-STD883C test method 1004.2 temperature and humidity cycling test MIL-STD810D test method 502.2 MIL-STD810 test method 507.2 procedure 3 Applications: Temperature adaptability test unde...
... Method. It is a fast and economical way to determine the film hardness using the drawing lead core or the pencil core. The pencil scratch method for coating hardness testing is a common method in the world ...